Prochem Supernova 700 User manual

Prochem Supernova 700 User manual
TABLE OF CONTENTS
New Products
Endeavor
Revolution
4
5
Portable Extraction Cleaning Machines
Self-Contained Extractors
FiveStar
Comet
Polaris
Supernova
6
7
8
10
Box Extractors
Bravo Spotter
Galaxy
Galaxy Pro
Galaxy 5
Extraction Machine Accessories
Powermate
Wands, Carpet Tools & Attachments
Aviator Axial Fan
Aqua Dri Carpet Dryer
External Heater/Bazooka Gum Remover/Circuit Locator
Auto Detailing Equipment & Accessories
Galaxy Automotive
Galaxy 5
Bravo Spotter/Aqua Dri
Auto Accessories/Dynamo Wet/Dry Vacuum
11
12
13
14
15
16
18
19
20
21
22
23
24
Vacuums
Backpack Vacuums
Atlas 6 & 10 Quart Backpack Accessories & Tools
25
26
Canister Vacuums - Dry Only
Dynamo 6 & 9 Quart Canisters
30
Canister Vacuums - Wet/Dry
Dynamo 5 & 8 Gallon
Dynamo 12 & 20 Gallon
32
33
Upright Vacuums
Reliant
Automatic Scrubbers/Grout Restoration
Pilot
Floor Machines and Accessories
Burnishers
Dual Speed
Low Speed
Floor Machines Accessories
Spare Parts and Supplies
Brass Fittings, Spray Tips, etc.
Rental Program Rental Equipment/Chemicals
34
35
36
37
38
39
40
43
NEW! MULTI-PURPOSE EXTRACTOR
ENDEAVOR
SPECIFICATIONS
Capacity - 13 Gallon
Tank Construction – Rotationally Molded Polyethylene
Tile & Grout Pump – 1200 PSI, Adjustable, Self-priming
Carpet Pump – 250 PSI, Adjustable
Vacuum Motors – Dual 2-Stage, parallel
CFM – 200
The all-new Endeavor is a high-performance, dual-vac, multipurpose extractor engineered to help you clean more efficiently
than ever. It has a number of breakthrough features, starting
with an innovative design that allows one operator to load or
unload the unit into a truck or van without a ramp. The key to
this design is a set of casters mounted up near the handle complemented by ramps built right into the mold, so you can literally
roll the machine into your vehicle. It also has an auto-fill, autodump design which eliminates workflow interruption. For power
matched by versatility, the dual-vac Endeavor has the most
versatile dual-pump system on the market, allowing you to clean
upholstery, carpet or hard floor surfaces. It can be used as a 250
psi heated carpet extractor or a 1200 psi tile and grout machine
without heat. When it comes time for routine maintenance, you’ll
really appreciate the remarkably well-organized and uncluttered
layout of its interior components. That means easy access for
no-hassle servicing. Its long list of thoughtfully designed features includes a spinner/wand holder to save you a trip to your
vehicle, recessed power cord receptacles, dual-wheeled casters
for easy maneuverability, a low easy-pour solution tank opening,
a 250 psi pump that can be adjusted down to as low 20 psi for
upholstery cleaning, a double-wall motor compartment for quiet
operation, along with an overall design that places the weight of
the machine over the back wheels to give you good leverage to
turn, transport and load the Endeavor with ease!
Heater – 2000W Internal
FEATURES
Rear Wheels – 12”
n Multi-purpose extractor that can clean both hard surface & carpet.
Casters – 4” Dual-wheel
n Easy one-person loading and unloading. Handle mounted casters
and dolly style weight distribution eliminates the need for a ramp!
Auto Fill – Float Style
n 5 gallon bucket fits on the recovery lid to reduce trips to and from
the vehicle.
Auto Dump – 3.5 GPM
Intake – 1.5” Cool Cuffs
Power Cord – Dual 50’ Detachable
n Dual-wheel casters provide excellent maneuverability.
Dimensions – 22.5”W x 33”L x 42.5”H
Weight – 175 lbs
n 12” non-marking, soft rear wheels protect fittings from being damaged during transport.
WARRANTY
n Combination wand / spinner holder on the front of the machine
for easy transport or storage.
Industry-leading limited lifetime warranty.
2 years on parts and labor, lifetime on the
housing
OPTIONAL ACCESSORIES
MODELS
9000I
4
n Conveniently located switches and controls, along with a built-in
circuit locator.
Multi-purpose extractor, 200CFM, 1200 PSI (adj.) / 250 PSI (adj.) Machine only, all tools sold separately.
1200REV 2540AC-HPC
9540AC-AD
1034ACH 1039AC 9000AC Revolution 12” hard surface tool
25’ hose set with cool cuff
Auto-fill / auto-dump hose assembly
12” Dual-jet stainless steel carpet wand
Stainless steel detailer tool
Spray gun, touch-less bathroom cleaning tool
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
NEW! TILE & GROUT CLEANING TOOL
REVOLUTION
The all-new Revolution is a tile and grout-cleaning tool that provides
remarkably smooth operation, gliding easily over the floor for less
operator fatigue. It has a lightweight design — only 13 lbs! — yet it’s
engineered for outstanding durability. It works on uneven surfaces like
grouted tile or smooth surfaces such as concrete, and can be used with
truckmounts or portables. The Revolution’s handle folds to 180 degrees
so you can clean under a counter or overhang as low as 6 inches. For
exceptionally convenient operation, it has a 90-degree inlet swivel that
rotates 360 degrees, which always keeps the hose out of the way even
when you’re cleaning alongside a wall. It’s also loaded with innovative features designed to help you clean more quickly and efficiently,
including: An inline filter that catches dirt before it has a chance to clog
tips — it works great even with machines that don’t have good filtration. An easy-pull trigger with safety. Recovery hoses located in the center
of the head for better suction, allowing you to
clean along edges without hitting hoses.
Comfortable and ergonomic hand grips.
A conveniently located vacuum relief
mounted in the handle so you can easily adjust air flow without bending over.
A stainless steel handle for long-term
durability. A high quality ceramic swivel
that’s repairable. And a T-style handle
that allows side- to-side as well as front-toback operation.
FEATURES
n 90-degree inlet swivel rotates 360 degrees – always keeping
the hose out of the way even when cleaning alongside a wall.
n Comfortable and ergonomic hand grips.
n Inline filter catches dirt before it has a chance to clog tips –
works great even with machines that don’t have good filtration.
n Easy pull trigger with safety.
n Conveniently located vacuum relief is mounted in the handle so
you can easily adjust air flow without bending over.
SPECIFICATIONS
Diameter
12”
n Stainless steel handle.
Repairable Swivel
Yes n Recovery hoses located in the center of the head for better
suction – allowing you to clean along edges without hitting
hoses.
Maximum PSI
2500
Intake Diameter
1.5”
Trigger Safety
Yes
n Highest quality ceramic swivel is repairable.
Weight
13 Lbs.
MODEL
WARRANTY
1200REV 12” revolution hard surface tool, repairable ceramic
swivel, 1.5”
Lifetime on rotationally-molded housing, 2 years on parts
and labor
5
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
SELF-CONTAINED EXTRACTORS
FIVESTAR
The amazing FiveStar is a small, self-contained unit with powerful brush
agitation to clean carpets, hard floors and grouted tile. It weighs only
40 pounds so it’s light enough for anyone to handle, plus the compact
body design and fold-down handle make it a breeze to transport and
store. Remove two screws and the machine opens like a clamshell for
fast service. The FiveStar is small enough to clean tight spaces and corners yet powerful enough to perform well in any commercial setting. A revolutionary bladder design allows you to fill and empty out of the
same bucket and eliminates the need to pour solution into the machine.
Simply fill the bucket, set it on the machine, close the lid and begin
cleaning. No more spills or mess!
Fold-down handle for
easy storage
and transport
SPECIFICATIONS
FEATURES
Solution Tank 3 gallon
Lift-off Recovery Tank 3 gallon
Solution Pressure 50 psi
Vacuum Motor
112 CFM, 2 HP
n Full complement of optional accessories attaches to back of unit for cleaning upholstery, stairs, etc.
Water Lift
107”
n Handle adjusts to operator height and folds down for easy storage.
Brush Motor
1/6 HP
Brush Speed 2,500 RPM
n Patented lift-off bucket with bladder makes filling and emptying incredibly easy.
Brush Style Chevron design, 4 rows
n See-through recovery dome.
Brush Bearings Sealed, stainless steel ball bearings
n Side extension for cleaning right to baseboards.
Cleaning Width
12 inches
Tank Construction
Polyethylene
n Upright-mounted motor and intercooler system combine for
long-lasting operation.
Wheels 7 inches, non-marking
Power Cord
25 ft. Dimensions
24”H x 23”L x 12”W
Weight 40 lbs.
Shipping Weight
53 lbs.
Ship Dimensions
28”H x 26”L x 15”W
Electrical Draw
12 amps
n Patented self-adjusting, self-leveling brush and vacuum shoe for easy
cleaning of all carpet lengths and uneven floors plus longer brush life.
OPTIONAL ACCESSORIES
330ACS
357AC
357AC-CM
341AC
341AC-15
10” Single-jet stainless steel wand
Upholstery tool, 8’ vacuum and solution hose assembly and hose bag
Upholstery tool, 15’ vacuum and solution hose assembly and hose bag
8’ vacuum and solution hose assembly
15’ vacuum and solution hose assembly
For our full line of optional accessories (1!f” diameter), see pages 16-18.
MODELS
WARRANTY
Lifetime on rotationally-molded housing,
2 years on parts and labor
401TR 411TR
FiveStar, carpet cleaner only FiveStar, all floor unit—carpet, hard floor and grouted tile
6
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
SELF-CONTAINED EXTRACTORS
COMET
The Comet is a small, economical, self-contained unit with powerful
brush agitation to clean carpets. It weighs only 40 pounds so it’s light
enough for anyone to handle, plus the compact body design and
fold-down handle make it a breeze to transport and store. Remove
two screws and the machine opens like a clamshell for fast service.
The Comet is small enough to clean in tight spaces and corners yet
powerful enough to perform well in any commercial setting. A revolutionary bladder design eliminates the need to pour solution into the
machine. Simply fill the bucket, set it on the machine, close the lid
and
begin cleaning.
No more spills or mess! The single on-off switch is designed for operation simplicity.
FEATURES
n Patented self-adjusting, self-leveling brush and vacuum shoe for easy cleaning of all carpet lengths and uneven floors plus longer brush life.
n Full complement of optional accessories attaches to the back of unit
for cleaning upholstery, stairs, etc.
n Handle adjusts to operator height and folds down for compact storage.
n Patented lift-off bucket with bladder makes filling and emptying incredibly easy.
n See-through recovery dome.
n Side extension for cleaning right to baseboards.
n Upright mounted motor and intercooler system combine for long-lasting
operation.
OPTIONAL ACCESSORIES
330ACS
357AC
341AC
341AC-15
10” single-jet stainless steel wand
Upholstery tool, 8’ vacuum and solution hose assembly and hose bag
8’ vacuum and solution hose assembly
15’ vacuum and solution hose assembly
SPECIFICATIONS
Solution Tank
3 gallon
Lift-off Recovery Tank
3 gallon Solution Pressure 50 psi
Vacuum Motor
92 CFM
Water Lift
85”
Brush Motor 1/12 HP
Brush Speed 2500 RPM
Brush Style Chevron design, 3 rows
Brush Bearings Sealed, stainless steel ball bearings
Cleaning Width
12 inches
For our full line of optional accessories (1!f” diameter), see pages 16-18­.
Tank Construction
Polyethylene
MODEL
Wheels
7 inches, non-marking
Power Cord
25 ft.
Dimensions
24”H x 23”L x 12”W
WARRANTY
Weight
40 lbs.
Lifetime on rotationally-molded housing, 2 years on parts and labor
Shipping Weight 53 lbs.
Ship Dimensions
28”H x 26”L x 15”W
Electrical Draw
12 amps
419TR Comet carpet cleaner
7
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
SELF-CONTAINED EXTRACTORS
POLARIS 500PS, 700PS, 701PS
These self-contained workhorses combine remarkable ease
of operation with unbeatable performance and portability to
deliver consistent results in light speed!
The Polaris is big enough to tackle large rooms and hallways and is available with a full complement of accessories giving it maximum versatility to clean upholstery,
stairs and other hard to reach places. A lift-off recovery
bucket makes emptying quick and easy without the
need for a drain hose. Special features including the
patented 4-wheel design,
adjustable handle and
lightweight construction
allow easy transportation
and unparalleled balance
and maneuverability.
Clamshell design provides easy
internal access for fast service
FEATURES
SPECIFICATIONS
Patented 4-wheel design makes turning in tight places easy and balances
total weight, even full of water, for easy maneuvering.
n Lift-off recovery bucket—no drain hose.
n Patented self-adjusting, self-leveling brush and vacuum shoe combine for
superior cleaning of all carpet lengths and uneven floors.
n Fully adjustable handle for greater operator ease, increased leverage on
stairs and over curbs plus compact storage.
n Side extension for cleaning right to baseboards (700/701).
n Upright-mounted vacuum plus intercooler system extends motor life.
n See-through recovery dome.
n
Solution Tank
5 gallon/7 gallon Solution Pressure 50 psi (500 & 700)
100 psi (701)
Vac Motor
112 CFM, 2 HP, 136” lift
Brush Motor
4200 RPM, 1/6 HP
Brush Speed
2100 RPM
Brush Style
Chevron design
Brush Bearings
Sealed, stainless steel ball bearings
Cleaning Width
14/17 inches
Tank Construction
Polyethylene
Wheels
7 inches, non-marking
Power Cord
25 ft. (500)
50 ft. detachable (700/701)
Dimensions
500PS
700/701PS 39”H x 30”L x 14”W
39”H x 30”L x 17”W
Weight
68/78 lbs.
Shipping Weight 95/103 lbs.
1204ACH D02359-1 358AC
323ACH 1033AC
1034AC
1041AC
Ship Dimensions
42”H x 34”L x 21”W
For our full line of optional accessories (1!s” diameter), see pages 15-20.
Electrical Draw
14/14/15 amps
OPTIONAL ACCESSORIES
Powermate—12” wide power brush
Adapter to connect standard 1!s” diameter hose assemblies
Upholstery cleaning kit—upholstery tool, vacuum and solution hose assembly and hose bag
Prespray wand
Single-jet wand
Dual-jet wand
15 ft. vac and solution hose assembly with adapter plate
MODELS
WARRANTY
Lifetime on rotationally-molded housing, 2 years on parts and labor
500PS 5-gallon Polaris/14” wide/50 psi
700PS 7-gallon Polaris/17” wide/50 psi
701PS 7-gallon Polaris/17” wide/100 psi
8
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
SELF-CONTAINED EXTRACTORS
POLARIS
801PS, 1201PS
For wide open spaces where productivity is the bottom line,
the 800 and 1200 models clean quickly and efficiently.
These larger self-contained units come equipped with dual
vacuums to more thoroughly clean and dry carpets. The
Polaris has a built-in silencer so you can clean without
interrupting the workflow. Top quality construction,
remarkable ease of operation and versatility combine
for a machine that consistently outperforms the competition. Dual lift-off recovery buckets with no hose
to detach allow
easy emptying.
Maintenance
is a breeze as
well—just remove
two screws and
open like a clamshell
for quick internal access. Quick-fit accessories
New optional valve allows you to adjust the performance
of the machine for regular maintenance or heavy-duty
restorative cleaning.
FEATURES
SPECIFICATIONS
Large wheels, adjustable handle and lightweight construction team up for
easy handling and storage.
n Optional accessories quickly attach to the rear of machine for cleaning
stairs, upholstery, etc.
n Patented dual lift-off recovery buckets provide quick and convenient
emptying.
n Patented four-wheel design for balance and reduced turning radius.
n High speed brush motor and brush guarantee powerful agitation to release
deeply embedded soil and grit, extending carpet life.
n Patented brush system utilizes fully sealed stainless steel ball bearings for
years of trouble-free operation.
Solution Tank 8/12 gallon Solution Pressure 100 psi
Vac Motors Dual, 2-stage bypass, 200 CFM, 3.5 HP
Brush Motor 4200 RPM, 1/6 HP
Brush Speed 2100 RPM
Brush Style
Chevron design
Brush Bearings Sealed, stainless steel ball bearings
Cleaning Width
19 inches
Tank Construction
Polyethylene
OPTIONAL ACCESSORIES
Wheels
8 inches, non-marking
1204ACH
D02359-1 358AC
323ACH 1033AC 1034AC 1041AC
Power Cord
50 ft. detachable
Dimensions
801PS
1201PS
38”H x 48”L x 19”W
38”H x 48”L x 19”W
Weight 114/120 lbs.
Shipping Weight 131/136 lbs.
Ship Dimensions
42”H x 45”L x 25”W
Electrical Draw
15/15 amps
n
Powermate—12” wide power brush
Adapter to connect standard 1!s” diameter hose assemblies
Upholstery cleaning kit—upholstery tool, vacuum and solution hose assembly and hose bag
Prespray wand
Single-jet wand
Dual-jet wand
15 ft. vac and solution hose assembly with adapter plate
For our full line of optional accessories (1!s” diameter), see pages 15-20.
WARRANTY
MODELS
801PS 8-gallon Polaris/19” wide/100 psi
1201PS 12-gallon Polaris/19” wide/100 psi
Lifetime on rotationally-molded housing, 2 years on parts and labor
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
9
SELF-CONTAINED EXTRACTORS
SUPERNOVA
There is literally nothing like the Supernova series—remarkable self-
contained extractors that clean in both forward and reverse! The patented
two-way system provides unparalleled productivity in any setting—clean up
to 4,000 square feet in one hour. All models operate forward in hallways
and other open areas, but with a simple pull of a
lever instantly change to reverse to clean corners
and other tight areas for a dramatic reduction in
labor costs. A specially designed vacuum head
allows cleaning on hard floors in addition to carpets, without any cumbersome attachments. Just
walk off carpet on to hard floors—it’s that simple.
Dual vacuum motors and a 19” cleaning width on
the 800 and 1200 models combine with a host of
other exclusive features to guarantee unrivaled
Optional accessories
for versatile cleaning
performance.
FEATURES
SPECIFICATIONS
Solution Tank
7/8/12 gallon Solution Pressure 50 psi
Vacuum Motor 700
112 CFM, 2 HP
Vac Motors 800/1200 Dual, 2-stage bypass, 200 CFM, 3.5 HP
Brush Motor 4200 RPM, 1/6 HP
Brush Speed 2100 RPM
Brush Style Chevron design
Brush Bearings Sealed, stainless steel ball bearings
Cleaning Width
17/19/19 inches
Tank Construction
Polyethylene
Wheels
8 inches, non-marking
Power Cord
50 ft. detachable
Dimensions
700
800/1200
37.5”H x 31.75”L x 17”W
38”H x 39”L x 19.25”W
Weight 87/113/123 lbs.
Shipping Weight 115/136/146 lbs.
Ship Dimensions
700
800/1200
42”H x 34”L x 21”W
42”H x 45”L x 25”W
Electrical Draw
12.8/12.8/15 amps
WARRANTY
n Two-way system for forward and reverse operation.
n Patented self-adjusting, self-leveling brush and vacuum shoes for easy cleaning of all carpet lengths and uneven floors plus longer brush life.
n Exclusive “clamshell” body provides fast and easy internal access
for quick servicing.
n Patented lift-off recovery buckets—no drain hose.
n Fully adjustable handle.
n Patented 4-wheel design gives extraordinary balance and reduces
turning radius for easy maneuverability in tight areas.
n Side extension for cleaning right to baseboards.
n Dual spray jets on both sides of the brush suspend the soil for increased
pick up and faster drying.
OPTIONAL ACCESSORIES
1204ACH D02359-1 358AC 323ACH
1033AC
1034AC
334ACH
1041AC
Powermate—12” wide power brush
Adapter to connect standard 1!s” diameter hose assemblies
Upholstery cleaning kit: upholstery tool, vacuum and solution hose assembly and hose bag
Prespray wand
Single-jet wand
Dual-jet wand
Hard floor squeegee wand
15 ft. vac and solution hose assembly with adapter plate
For our full line of optional accessories (1!s” diameter), see pages 15-20.
MODELS
Lifetime on rotationally-molded housing,
2 years on parts and labor
700PSN 800PSN
1200PSN
7-gallon Supernova
8-gallon Supernova, dual vacuum
12-gallon Supernova, dual vacuum
10
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
BOX EXTRACTORS
BRAVO
SPOTTER
AVAILABLE WITH HEAT!
The new Bravo spotter delivers incredible efficiency and power in a deceptively small package. No set up time—simply unload and begin cleaning
immediately. Compact size and maneuverability make it
ideal for spotting and quick cleaning of small carpeted
areas, upholstery and auto interiors. Operators will
appreciate the specially designed molded-in holders
that carry spray bottles, leaving the hands free.
Over time it’s a winner too, thanks to the
upright-mounted
vacuum motor and
oversized recovery
tank that combine
to insure longer motor
life. Porthole allows
easy access to
recovery tank
SPECIFICATIONS
FEATURES
n
n
n
n
n
Optional in-tank heater delivers 150-degree heat. (339MH-HT)
Unique molded-in holders carry spray bottles for greater ease.
Large six-inch wheels and an optional transport handle plus cord
wrap assembly make it a snap to wheel about.
Quickly opens up for easy servicing and repair.
Large porthole on recovery tank allows easy access for odor-free
maintenance.
OPTIONAL ACCESSORIES
330ACS
334ACH
1204ACH
323ACH
342AC
343AC
1040AC
1039AC 1037AC
MODELS
10” single-jet wand
10” hard-floor squeegee wand
Powermate – 12” wide power brush
Prespray wand
8-ft. hose assembly with quick connects
8-ft. high pressure hose assembly with quick connects
15-ft. hose assembly
For our full line of
Stainless steel upholstery tool
optional accessories
Upholstery tool, durable plastic head
(1!s” diameter), see
pages 15-20.
300MH
Deluxe model with high performance motor (tools and hose set
sold separately)
339MH-HT Bravo with heat, stainless steel tool and transport handle
Solution Tank
3 gallon
Recovery Tank
3.5 gallon
Solution Pressure
55 psi
Vacuum Motor
2 stage, bypass
Water Lift
106”
Handle
Adjustable, 22-37”
Wheels
6 inches
Power Cord
25 ft.
Optional Heater 1500 watts, stainless steel
Recommended Hose
Assembly
8 ft.
Optional Economy Tool
Plastic
Optional Deluxe Tool
Long nose, stainless steel handle
Weight
19 lbs.
Shipping Weight
27 lbs.
Dimensions
20.5”H x 15”L x 13”W
Ship Dimensions
23”H x 18”L x 15.5”W
Electrical Draw
300MH 339MH-HT 12 amps
15 amps
WARRANTY
Lifetime on rotationally-molded housing, 2 years on parts and labor
Bravo with heat: Lifetime on rotationally-molded
housing, 1 year on parts and labor
11
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
BOX EXTRACTORS
GALAXY
HEAT READY!
Introducing our exclusive line-up of Galaxy carpet extractors that now
comes “heat-ready.” Life’s little decisions just got a whole lot easier! You
can purchase any Galaxy without heat and if you change your mind, no
problem. Simply order our external heater, and away you go. Placing the
heater on the outside also insures that everything on the inside of the
machine runs cooler, extending the life of the vacuum and pump motors.
The stainless steel heater tank is guaranteed for life. If a repair is necessary,
simply lift the heater off the back of the machine. Meantime, you can continue to use the unit without heat.
From a seller’s standpoint, there’s no need to purchase both heated and
non-heated units—just stock machines and heaters. Your customers can
start with a non-heated model then later upgrade to heat
without having to purchase a whole new machine.
SPECIFICATIONS
Solution Tank
12 gallon
FEATURES (Galaxy and Galaxy Pro)
Recovery Tank
11 gallon
Solution Pressure
100/150/200/500 psi
Vacuum Motors
Dual high-performance 2-stage and 3-stage
Water Lift
150”/185”/210”
Tank Construction
Polyethylene
Baseplate
!f” aluminum
Rear Wheels
10 inches, non-marking
Casters
4 inches
Power Cord
50 ft. detachable
n Exclusive heat-ready system offers the ultimate in versatility.
n External heater makes repairs a snap and keeps heat away from the
motor compartment.
n New “granite look” projects an image of professionalism and keeps
the machine looking brand new.
n Upright-mounted motors along with a special intercooler guarantee
long life and durability.
n Standard 5-gallon bucket fits under drain valve for easy emptying.
n Opens quickly like a clamshell for easy servicing.
n Top-mounted switches.
n Sealed motor cavity insures that spills on the outside stay out.
Hose Assembly
25 ft.
Optional Wand
Deluxe dual-jet S-bend
stainless steel
Dimensions
35”H x 31”L x 18”W
Weight
78/80/80/84/84/89 lbs.
Shipping Weight
94/96/96/100/100/105 lbs.
Ship Dimensions
36.5”H x 31.5”L x 19”W
Electrical Draw
13.5/13.5/14.1/14.2/15.4/17.1 amps
WARRANTY
Lifetime on rotationally-molded housing, 2 years on parts and labor
MODELS
2000SX 2000SX-HR
2000IX-HR
2000JX-HR
2000KX-HR* 2000CX-HR*
Dual 2-stage vacs, 150” lift, 100 psi, not heat ready
Dual 2-stage vacs, 150” lift, 100 psi
Dual 2-stage vacs. 185” lift, 150 psi
Dual 2-stage vacs, 150” lift, 200 psi (adj)
Dual 2-stage vacs, 185” lift, 200 psi (adj)
Dual 3-stage vacs, 185” lift, 500 psi (adj)
*20-amp circuit required.
12
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
BOX EXTRACTORS
GALAXY PRO
HEAT READY!
This is the big brother to our popular Galaxy series with a large 17-gallon
capacity housed within an extremely portable unit that’s affordably priced.
The “heat-ready” Galaxy Pro includes all the great features of our standard
Galaxy model with the added benefits of an optional adjustable 500 psi
and the ability to clean extremely large areas quickly and professionally.
Versatility is the name of the game with the heat-ready system. You can
purchase the machine without heat and later decide to add heat without having to buy a new unit. The external heater makes repairs a snap, and it keeps the heat away from the internal components, extending the life of the machine. All units are available “heat ready.” OPTIONAL ACCESSORIES (Galaxy and Galaxy Pro)
605HR 1033ACH
1034ACH
1034ACH-500
334ACH 1039AC
1204ACH
1800AC-200 00206-1A
988CS
2540AC-HP Heater kit (see page 18 for more details)
Single-jet stainless steel wand (specify psi)
Dual-jet stainless steel wand (for 100-250 psi machines)
Dual-jet stainless steel wand (for 500 psi machines)
10” hard floor squeegee wand
Stainless steel detailer tool
Powermate—12” wide power brush (specify psi)
18” Powermate, up to 500 psi
Receptacle for power wand (factory installed)
Circuit locator
25’ vacuum and high pressure solution hose assembly with quick conncects
For our full line of optional accessories (1!s” diameter), see pages 15-20.
MODELS
2700IX-HR
2700JX-HR
2700CX-HR*
2700FX-HR
Optional external
heater for Galaxy
and Galaxy Pro
Dual 2-stage vacs, 185” lift, 150 psi
Dual 2-stage vacs, 150” lift, 200 psi (adj)
Dual 3-stage vacs, 185” lift, 500 psi (adj)
Dual 3-stage vacs, 210” lift, 500 psi (adj)
dual power cords, circuit locator included
*20-amp circuit required.
SPECIFICATIONS
Solution Tank
17 gallon
Recovery Tank
15 gallon
Solution Pressure
150/200/500 psi
Vacuum Motor
Dual high-performance
2-stage and 3-stage
Water Lift
150”/185”/210”
Optional Wand
Dual-jet or single-jet
stainless steel.
Optional Hose
Assembly
25 ­ft.
Tank Construction
Polyethylene
Baseplate
1/4” aluminum
Rear Wheels
10 inches, non-marking
Casters
4 inches
Power Cord
50 ft. detachable
Dimensions
38”H x 31”L x 20”W
Weight
95/99/104/104lbs.
Shipping Weight
111/115/120/120 lbs.
Ship Dimensions
40.5”H x 39”L x 21”W
Electrical Draw
Dual Cord (FX)
14.1/14.2/17.1 amps
14.7/11.8 amps per cord
WARRANTY
Lifetime on rotationally-molded housing, 2 years on parts and labor
13
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
BOX EXTRACTORS
GALAXY 5
NOW AVAILABLE HEAT READY!
One look at our new compact addition to the Galaxy series and you’ll
realize that it is possible to have your cake and eat it too! The Galaxy 5
was designed for remarkable heat and power all housed within an incredibly lightweight and portable package. The Galaxy 5 is an obvious
choice for auto detailing and for those jobs where a small yet powerful
unit makes more sense. It’s light enough for anyone to handle and the
fold-down handle makes it a snap to transport and store. We’ve also
added an exclusive baffle system for exceptionally quiet operation. The
new optional external heater can be removed in seconds if a repair is
necessary, and the stainless steel heating element is guaranteed for life. Optional
external heater
FEATURES
SPECIFICATIONS
Solution Tank
5 gallon
Recovery Tank
3 gallon
Solution Pressure
100 psi
Optional Heater
2000 watts, stainless steel
Vacuum Motor
Single 3-stage
Water Lift
136”
Tank Construction
Polyethylene
Baseplate
Aluminum
Rear Wheels
7 inches, non-marking
Casters
2.5 inches­
Power Cord
25 ft. detachable
Hose Assembly
15 ft.
Dimensions
28”H x 24.5”L x 16”W
Weight
57 lbs.
Shipping Weight
65 lbs.
Ship Dimensions
30”H x 25.5”L x 17”W
n External heater is a snap to remove and keeps heat away from the inside
of the machine for longer life.
n “No drip” motor cavity guarantees water spilled on outside of machine
stays out!
n Opens quickly like a clamshell for fast and easy servicing.
n Upright-mounted motors along with a special intercooler guarantee long
life and durability.
n Full complement of optional accessories attaches to the back of unit for
cleaning upholstery, stairs, etc.
n Silencer system for quieter operation.
n Handle folds down for easy transport and compact storage.
n Optional heating system delivers consistent 170 degrees.
OPTIONAL ACCESSORIES
1204ACH
330ACS
1038AC
1039AC
323ACH
Powermate – 12” wide power brush
10” Stainless steel wand
Crevice tool
Stainless steel upholstery tool
Prespray wand
MODELS
WARRANTY
Lifetime on rotationally-molded housing, 2 years on parts and labor
500BX 3-stage vac, 100 psi, not heat ready
500BX-HR 100 psi, heat ready
14
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
EXTRACTION MACHINE ACCESSORIES
POWERMATE
1204ACH
1800AC-200
Why use a standard wand when you
can get a combination of powerful
brush agitation and speed in a super
lightweight attachment with wheels—
all at a bargain
price! So lightweight and
maneuverable, the Powermate will
triple your productivity. No more
backaches and fatigue from slow,
tedious cleaning with a wand.
The Powermate attaches to any
portable unit to remove deeply
imbedded soil and grit at record
speed! A high-speed cylindrical
brush gets down to the base of
the carpet fibers for more effective cleaning. Available with 1!s” diameter handle. For use
up to 500 psi. Order factory installed part number 002061A receptacle with your EDIC extractor to have the ability to
plug the power cord from your Powermate directly into your
machine instead of an outlet.
The ultimate in speed and
power for a deep down clean! Powermate 1800AC attaches
to any portable or truckmount
extractor for cleaning tough,
dirty high-traffic areas. An
18” wide cleaning path and
high-speed brush save valuable time and reduce operator
fatigue. The power brush is
designed to clean right up to
baseboards and into corners.
Its fully adjustable handle fits
any size operator and the low
profile makes it a breeze to
get under furniture. For use
up to 500 psi. Now available in 2” to adapt to most truckmount units.
FEATURES
n
n
n
n
n
n
Weighs only 15 lbs.
See-through front cover.
Sealed, stainless steel ball bearings.
High-speed 2500 RPM brush for deep cleaning.
Heavy-duty aluminum handle.
Adapts to all EDIC extractors.
OPTIONAL ACCESSORIES
FEATURES
0-90 degree adjustable handle plus fingertip controls
for easy handling.
n High-speed chevron-style brush for deep cleaning.
n See-through sight glass to monitor recovery.
n Heavy-duty steel handle.
n Adapts to all EDIC extractors.
n 5 Spray tips.
n
SPECIFICATIONS 1204ACH/1800AC-200
Cleaning Width
12 inches/18 inches
Housing
Ultra high-impact ABS
Brush
Cylindrical, Tynex bristles
B00216
Adapter to plug Powermate into standard wall outlet
00206-1A Receptacle, power wand (factory installed)
Brush Motor
1/12 HP, 1/6 HP
Brush Speed
2500 RPM/2100 RPM
Electrical Draw
1.9/1.6 amps
MODELS
Power Cord
25 ft.
Weight
15/47 lbs.
Shipping Weight
25/54 lbs.
Ship Dimensions
1204ACH 1800AC-200 13.5”H x 49.5”L x 18”W
58.5”H x 21”L x 9.5”W
1204ACH
1800AC-200
12” wide power brush, 1.5” handle
diameter, up to 500 psi
18” wide power brush, 1.5” or 2” handle
diameter, up to 500 psi
WARRANTY
2 years on parts and labor
15
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
EXTRACTION MACHINE ACCESSORIES/EASY MOP
GLIDEMASTER
WANDS, TOOLS, HOSE ASSEMBLIES
Single-Jet 9” Stainless Steel Wand
This wand is perfect for use with smaller
extractors like the FiveStar. 1!!f” or 1!s”
diameter available.
MODELS
330AC 1!f” fittings–100 psi - FiveStar/Comet
330ACS 1!s” fittings–100 psi - All other EDIC Extractors
Single or Dual-Jet Stainless Steel Wand
The Glidemaster wands allow for easy pickup under
furniture and desks. The head is winged to prevent
overspray and the insulated handle, valve lever and grip
ensure operator comfort. The dual-jet version has an
S-bend for superior pickup under all types of furniture.
Dual-jets guarantee maximum pressure for fast and
thorough cleaning. Standard or high-pressure models
available—up to 1000 psi. 1!s” diameter.
MODELS
1033AC/1033ACH
1034AC/1034ACH
1034ACH-500
Single jet: Standard/High pressure
Dual jet: Standard/High pressure
Dual jet: High pressure up to 500 psi
Width: 12”
Length: 60”
Weight: 7.4 lbs. Ship Dimensions: 65”H x 12”L x 13”W
30 days Aluminum Squeegee Wand
Our new aluminum
squeegee wand can
be attached to any
extractor with 1!s”
diameter to provide
thorough cleaning of
hard floor surfaces.
334AC Single-jet squeegee wand
14.5”
Length: 55.5”
Weight: 5 lbs.
60”
Weight: 8 lbs.
Shipping Weight: 11 lbs.
Ship Dimensions: 65”H x 12”L x 13”W
Traditional Hose Assemblies
Available with choice of standard or high heat, high pressure
models. Lengths from 10’– 50’. 1!s” or 1!f” hose cuffs. Complete
with fittings, see page 39.
Connector—Model # J00630
Allows you to quickly connect two hose assemblies together for
extra length, see page 39.
Bucketless Floor
Cleaning System
The Easy Mop is
a self-contained
dispensing mop
system that
cleans floors, ceilings and walls with no spills, no mess. A zerogravity trigger-action sprayer with an adjustable nozzle makes it
easy to clean up the sides of walls and even ceilings, and get into
corners and tight spaces. The Easy Mop is designed to work in
tandem with green chemicals and requires much less chemical
than a standard mop.
n Pressurized reservoir—cleans up to 3,200 sq. feet per filling.
n Easy-grip activator is ergonomically sound and activates solution
with a slight downward movement, reducing operator fatigue.
n Non-shrinking microfiber pile mop provides increased absorbency
and can be laundered over 500 times before replacement. MODEL/ACCESSORIES
Shipping Weight: 9 lbs.
Ship Dimensions: 65”H x 12”L x 13”W
16
Length: FEATURES
MODEL
Width:
9”
Easy Mop
Shipping Weight: 12 lbs.
Warranty:
Width: 4000EM Easy Mop
4500GG Microfiber Pad (Green/Green)
4500GW Microfiber Pad (Green/White)
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
EXTRACTION MACHINE ACCESSORIES
Cast aluminum with black powder-coat
upholstery tool with see-through window,
enclosed spray chamber, and 3-ft. pigtail.
Recirculating notches decrease water
build-up in spray chamber for faster
drying time. High pressure available.
MODELS
321AC
1!s” diameter
321ACH
High Pressure—up to 300 psi
Width: 3.5” Length: 7”
Weight: 1.5 lbs. Ship Wt: 3 lbs.
Upholstery tool with see-through
window and hose assembly complete
with durable hose bag.
MODELS
357AC
358AC
Weight: Ship Wt: 8 ft. hose assy., tool and hose bag. 1!f” diameter.
15 ft. hose assy., tool &
hose bag. 1!s” diameter.
4/8.8 lbs.
6/12 lbs.
Durable stainless steel auto detailer
tool specially designed to effectively
clean in tight places. High pressure up
to 1000 psi.
This auto detailer has a durable
plastic head to monitor recovery.
Up to 100 psi.
MODEL — 1039AC (1!s” diameter)
Weight: 1.3 lbs.
Width: 4
Width: 3.5” Length: 11.5”
Weight: 1.7 lbs. Ship Wt: 3 lbs.
The ultimate in stair cleaning, the stainless steel stair wand has a winged head,
grab handle and insulated grip. High
pressure up to 1000 psi.
MODEL — 1035AC (1!s” diameter)
Width: 12” Weight: 4.5 lbs. Length: 36”
Ship Wt: 7.5 lbs.
MODEL—1037AC (1!s” diameter)
Ship Wt: 3 lbs.
Length: 8”
Lightweight, economy upholstery tool
with a durable plastic housing. Not
available for high heat. Up to 100 psi.
MODELS
319AC 319ACG
319ACS
Width: 4” Weight: Ship Wt:
Stainless steel crevice tool for reaching
into crevices and tight spaces for more
thorough cleaning. Up to 1000 psi.
MODEL — 1038AC (1!s” diameter)
Length: 17”
Weight: 3 lbs. Lightweight stainless steel stair tool
is made of high quality components
and built to last. High pressure up to
1000 psi.
MODEL — 1021AC (1!s” diameter)
Weight: 2 lbs.
Width: 4”
Ship Wt: 3 lbs.
Length: 8”
Tool w/8’ hose assy.,
1!f” diameter.
Tool w/8’ hose assy., 1!s” diameter. Add D02359-1 for Polaris
and Supernova models.
Tool only, 1!s” diameter.
Length: 11.5” 2.6/2.6/1 lbs.
5/5/3 lbs.
Width 3.5”
Ship Wt: 5 lbs.
Prespray wand constructed of brass
with 25’ hose.
MODELS
323AC—up to 100 psi
323ACH— High heat, high pressure
Weight: 3 lbs. Ship Wt: 5 lbs.
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
17
EXTRACTION MACHINE ACCESSORIES
AVIATOR
Axial Fan
Superior performance, design and engineering makes our new
axial fan the most efficient in the industry, providing more CFM
with a lower amp draw. Use our large-sized blower to tackle even
the toughest water damage restoration and carpet drying jobs in
a hurry. With an amazing velocity of 3000 CFM at a super-low
2.3 amps, the Aviator literally blows away the competition! The
bottom line is a much faster drying time which puts more money
in your pocket. A built-in GFCI outlet means you can link together multiple units using only one 15-amp circuit for the really big
jobs. Plus the dual-direction airflow and choice of drying positions make it extremely versatile. The Aviator axial fan is uniquely
designed with 360-degree stacking for easy loading and storage. It’s lightweight with an ergonomically-designed handle and convenient cord wrap for easy transport and maneuvering. Comes
complete with an hour meter to monitor usage.
Built-in GFCI outlet for linking
multiple units on a single circuit
SPECIFICATIONS Aviator with wheels
Housing
Roto-molded polyethylene
Motor
1/4 HP
Speeds
2
Power
120 volts
FEATURES
Electric Draw
2.3 amps
n
Impeller
16.5” diameter
Stackable
Yes
Power Cord
25 ft. yellow safety cord
Weight
29 lbs.
Shipping Weight
36 lbs.
Dimensions
20.5”H x 20.5”L x 16”W
Ship Dimensions
21”H x 21”L x 16”W Easy and secure 360-degree
stacking of units
The most powerful blower in its class with a velocity of 3000 CFM.
n Built-in GFCI outlet makes it easy to daisy-chain multiple units on a
single 15-amp circuit.
n Hour meter monitors usage.
n Exclusive 360-degree frame allows for easy stacking of units.
n Circuit breaker protects air mover and attached devices.
n Durable polyethylene housing in granite color that retains its brand-new appearance.
n Available in a low 2.3 amps.
WARRANTY
MODELS
Lifetime on rotationally-molded housing,
2 years on parts and labor
3009AF-W Aviator with wheels
18
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
EXTRACTION MACHINE ACCESSORIES
AQUA DRI
Portable Air Mover/Carpet Dryer
EDIC’s Aqua Dri hosts a series of exclusive features that put it far
ahead of the pack and make it indispensable for quick drying of carpet
and hard floors. The Aqua Dri’s unique body design makes it super
easy to stack for storage or transport. There are two models to choose
from: The standard unit offers three-speed drying with a !s HP motor
and 2400 CFM. The larger Aqua Dri Pro offers three-speed drying
with !s HP (2700 CFM) for the ultimate in power. Both models can be
easily adjusted to four different positions for drying carpets, furniture,
curtains, ceilings—you name it! Available with
optional carpet clamp.
SPECIFICATIONS 3004ADN/3005ADN
Accordion hose attachment for attics
and other hard-to-reach places
Optional carpet clamp
FEATURES
n
n
n
n
n
Exclusive hi-tech design makes it the most
versatile, compact and portable air mover
in the industry.
Heavy-duty housing is made of durable
roto-molded polyethylene
Balanced carry-along handle distributes weight
evenly for superior portability.
Easy to store or stack for transport.
Thermally protected motor.
Housing
Polyethylene
Motor
!s HP/ !s HP
Speeds
3
Power
2400/2700 CFM
Electrical Draw
3.9/5.5 amps
Blower Fan
9!s”/10%k” diameter
Intake Screens
Open flow design
Height Adjustment 4 positions
Stackable
Yes
Kickstand
Included
Carpet Clamp
Optional, see models
Power Cord
25 ft.
Dimensions
3004ADN
3005ADN 18”H x 18#f”L x 17#k”W
19#f”H x 20%k”L x 19!f”W
Weight
30/33 lbs.
Shipping Weight
33/36 lbs.
Ship Dimensions OPTIONAL ACCESSORY
13168A
Accordion hose attachment
Length: 15 ft. Diameter: 10 in.
Tightening belt allows hose to attach to the nose of the Aqua Dri to allow reach into tight spaces such as vents, attics, and other hard to reach areas.
Yellow with black fabric wear strip.
WARRANTY
19”H x 19”L x 18”W
21”H x 21”L x 19!s”W
MODELS
All models available with optional carpet clamp
3004ADN 3005ADN 3004AD-CCN
3005AD-CCN
Aqua Dri, !s HP, 9!s” fan
Aqua Dri Pro, !s HP, 10%k” fan
Aqua Dri, !s HP, 9!s” fan
with carpet clamp
Aqua Dri Pro, !s HP, 10%k” fan
with carpet clamp
Lifetime on rotationally-molded housing,
2 years on parts and labor
19
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
EXTRACTION MACHINE ACCESSORIES
EXTERNAL HEATER SYSTEM
A revolutionary new way to clean with heat!
SPECIFICATIONS
Pressure
Up to 1300 psi
Tank Construction
Stainless steel
Shipping Dimensions
8¼”H x 24”L x 8¼”W
Power Cord
50 ft. detachable
Electric Draw
14.2 amps
The EDIC external heater system is the only one of its kind.
n Our exclusive “heat ready” system, available on the Galaxy, Galaxy Pro, and
select Galaxy 5 models, gives you the option of purchasing a machine without
heat and then adding the heater at any time.
n Ours is the only detachable heater on the market that mounts on the outside,
taking only seconds to attach or remove. Placing the heater on the outside has
another advantage — it ensures everything on the inside of the machine runs
cooler, thereby extending the life of the pump and motors.
n The stainless steel tank and heating element eliminate galvanic corrosion and
clogs in the solution flow that can obstruct heat transfer.
n This system really heats up fast, delivering 210 degrees of heat in about 90
seconds. If a repair is necessary, just lift the heater off the back of the machine. It’s that simple! Our entire line of heated extractors has the heater system mounted on the outside
for greater longevity and ease of repair.
MODELS
WARRANTY
Lifetime on stainless tank and rotationally-molded
housing, 2 years on parts and labor
605HR 2000-watt heater kit for Galaxy, Galaxy Pro and selected Galaxy 5 models
602HR 1000-watt replacement heater for Galaxy series automotive units
CIRCUIT LOCATOR
MODEL: 988CS- with 1 wall outlet plug and one twist-lock to fit EDIC equipment
MODEL: 989CS- with 2 wall outlet plugs
So you’ve got two power cords and you need to find outlets
on different circuits? No problem! Just plug the circuit locator with an extension cord into two wall outlets — the sensor
instantly lights up when it’s good to go. Use it anytime for any
equipment. Prevents potential power overload by taking the
guesswork out of locating circuits.
20
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
AUTO DETAILING
GALAXY
AUTOMOTIVE
COMES STANDARD WITH HEAT!
Nothing beats these machines for getting at deeply imbedded dirt and
grime in auto upholstery and carpet and removing it for good! The winning combination is lots of heat plus high-performance vacuums for
squeaky-clean interiors and faster drying time. Our automotive model is a
single-cord unit with a powerful yet low amp 3-stage vacuum. Our Galaxy
Automotive comes standard with our exclusive Heat ‘N’ Run external
heater that makes repairs a snap and keeps heat away from the motor
chamber, extending the life of the internal parts.
The heater can be removed in about 15 seconds
if need be, and the unit cleans with or without
heat. The Galaxy Automotive is a large 12 gallon
capacity inside a compact body for exceptional
portability. Comes complete with a vacuum and
solution hose assembly designed specifically for
automotive detailing and a stainless steel autodetailing tool.
FEATURES
SPECIFICATIONS
n 1000 watt in-line external heater delivering up to 170 degrees in just 90
seconds.
n Durable stainless steel heating chamber and heating element.
n Exclusive external heating system for easy removal and repair.
n External heater design removes heat from the motor compartment
keeping the vacuum motors and pump running cooler.
n Opens quickly like a clamshell for easy servicing.
n Powerful and lightweight – ideal for single operators.
n “No drip” motor cavity guarantees water spilled on the outside of
machine stays outside and won’t accumulate in the motor compartment.
Solution Tank
12 gallon
Recovery Tank
11 gallon
Solution Pressure
100 psi
Vacuum Motor
Single 3-stage
Water Lift
117”
External Heater 1000 watts
Detailer Tool
Stainless steel
Hose Assembly
15 ft.
Tank Construction
Polyethylene
Baseplate
1/4” aluminum
Rear Wheels
10 inches
Casters
4 inches
Power Cord
50 ft. detachable
OPTIONAL ACCESSORIES
1038AC Stainless steel crevice tool
1035AC Stainless steel van tool
1039AC Stainless steel detailer tool
MODELS
3139BX-EH 12 gal., 1000w heater, 15-ft. hose assembly, 1039AC
detailing tool
Dimensions
35”H x 31”L x 18”W
38”H x 31”L x 20”W
Weight
88 lbs.
Shipping Weight
110 lbs.
Ship Dimensions
36.5”H x 31”L x 19”W Electrical Draw 18.8 amps
WARRANTY
Lifetime on rotationally-molded housing and stainless
steel heater tank, 2 years on parts and labor
21
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
AUTO DETAILING
GALAXY 5
COMES STANDARD WITH HEAT!
The Galaxy 5 was designed for remarkable heat and power all housed
within an incredibly lightweight and portable package. The exclusive
external heater design, with stainless steel heating chamber and heating
element, delivers up to 170 degrees on demand. The unit can be operated
on a single power cord, which gives it the versatility to be used in a
variety of settings. The heater can be removed in about 15 seconds if a
repair is necessary, and the stainless steel heating chamber comes with
a lifetime guarantee. The Galaxy 5 is an obvious choice for auto detailing
and those jobs where a small yet powerful unit makes more sense. It’s
light enough for anyone to handle and the fold-down handle makes it a
snap to transport and store. We’ve also added an exclusive baffle system
for exceptionally quiet operation. The Galaxy 5 automotive unit comes
complete with a vacuum and solution hose assembly designed specifically
for automotive detailing and a stainless steel auto-detailing tool. SPECIFICATIONS
FEATURES
Solution Tank
5 gallon
Recovery Tank
3 gallon
Solution Pressure
100 psi
External Heater
1000 watts
Vacuum Motor
Single 3-stage
Water Lift
117”
Tank Construction
Polyethylene
Baseplate
Aluminum
Rear Wheels
7 inches, non-marking
Casters
2.5 inches
Power Cord
25 ft. detachable
Hose Assembly
15 ft.
Weight
57 lbs.
Shipping Weight
65 lbs.
Dimensions
24.5”H x 16”L x 28”W
Ship Dimensions
25”H x 17”L x 29”W
Electric Draw
18.8 amps
n Single cord operation.
n Exclusive 1000-watt external heating system for on-demand heat up to 170 degrees. n Stainless steel heating element. n Stainless steel heating chamber with lifetime warranty.
n Opens quickly like a clamshell for easy servicing.
n “No drip” motor cavity guarantees water spilled on the outside of machine
stays outside and won’t accumulate in the motor compartment.
n Exclusive EZ removable heater for quick service and no down time. n Silencer system for quiet operation. n Handle folds down for easy transport and compact storage.
n External heater design removes heat from the motor compartment keeping
the internal parts cool.
OPTIONAL ACCESSORIES
WARRANTY
Lifetime on rotationally-molded housing and
stainless steel heater tank, 2 years on parts
and labor
1035AC Stainless steel van tool
1038AC Stainless steel crevice tool
1039AC Stainless steel detailer tool
MODEL
539BX-EH Single 3-stage vac, 1000-watt external heater,15-foot automotive hose assembly, 1039AC auto detailer tool.
22
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
AUTO DETAILING
BRAVO
SPOTTER
WITH HEAT!
The new 17-pound Bravo spotter delivers incredible efficiency and power in a deceptively
small package. No set up time—simply unload and begin cleaning immediately. Compact size
and maneuverability make it ideal for spotting and quick cleaning of small carpeted areas,
upholstery and auto interiors. Operators will appreciate the specially designed molded-in
holders that carry spray bottles, leaving the hands free. Over time it’s a winner
too, thanks to the upright-mounted vacuum motor and oversized recovery
tank that combine to insure longer motor life. The Bravo automotive unit
comes complete with a vacuum and solution hose assembly and a stainless
steel auto-detailing tool.
SPECIFICATIONS
FEATURES
Solution Tank
3 gallon
Recovery Tank
3.5 gallon
Solution Pressure
55 psi
Vacuum Motor
2 stage, bypass
Water Lift
107”
Handle
Adjustable, 22-37”
Wheels
6 inches
Power Cord
25 ft.
Heater 1500 watts, stainless steel
Hose Assembly
8 ft.
High Heat
Long-nose, fully stainless steel tool
Weight
19 lbs.
Shipping Weight
27 lbs.
Dimensions
20.5”H x 15”L x 13”W
Ship Dimensions
23”H x 15”L x 13”W
Electrical Draw
15 amps
n
n
n
n
n
n
n
n
1500 watt, in-tank heater delivers 150 degree heat.
Unique molded-in holders carry spray bottles for greater ease.
Stainless steel heating element.
Large 6” wheels and an optional transport handle plus cord wrap
assembly make it a snap to wheel about.
Carry-along handle increases portability.
Small and light enough to carry with one hand.
Quickly opens up for easy servicing and repair.
Large porthole on solution tank allows easy access for odor-free
maintenance of recovery tank.
OPTIONAL ACCESSORIES
WARRANTY
330ACS
Single-jet wand, 10” wide
1039AC-1 Stainless steel detailer tool
Lifetime on rotationally-molded
housing and stainless steel heater
tank, 2 years on parts and labor
MODEL
339MH-HT Bravo with heat, hose assembly and transport handle
AQUA DRI
SPECIFICATIONS Portable Air Mover/Carpet Dryer
EDIC’s Aqua Dri hosts a series of exclusive features that put it far ahead
of the pack and make it indispensable for quick drying of carpet and hard
floors. The Aqua Dri’s unique body design makes it super easy to stack
for storage or transport. There are two models to choose from: The standard unit offers three-speed drying with a !s HP motor and 2400 CFM.
The larger Aqua Dri Pro offers three-speed drying with !s HP (2700 CFM)
for the ultimate in power. Both models can be
easily adjusted to four different positions for
drying auto interiors, carpets, furniture, curtains, ceilings—you name it!
MODELS
All models available with optional carpet clamp
3004ADN
3005ADN
Aqua Dri, !s HP, 9!s” fan
Aqua Dri Pro, !s HP, 10%k” fan
Housing
3004ADN/3005ADN
Polyethylene
Motor
!s HP/ !s HP
Speeds
3
Power
2400/2700 CFM
Electrical Draw
3.9/5.5 amps
Blower Fan
9!s”/10%k” diameter
Intake Screens
Open flow design
Height Adjustment
4 positions
Stackable
Yes
Kickstand
Included
Carpet Clamp
Optional
Power Cord
Dimensions
3004ADN
3005ADN 25 ft.
18”H x 18#f”L x 17#k”W
19#f”H x 20%k”L x 19!f”W
Weight
30/33 lbs.
Shipping Weight
36 lbs
Ship Dimensions
19”H x 19”L x 18”W
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
23
AUTO DETAILING
ACCESSORIES
1033ACH Single-jet Wand, high pressure
1034ACH Dual-jet Wand, high pressure
1039AC-1 Stainless Steel Detailer Tool
1038AC
1035AC Stainless Steel Stair Wand
DYNAMO
Stainless Steel Crevice Tool
WET/DRY VACUUM SERIES
12W/20W
These wet/dry vacuums have the power and capacity to tackle the really big jobs yet
are so quiet you can use them anywhere without interrupting the work environment. The
12-gallon model combines large capacity with ease of transportation and storage. The
20-gallon Dynamo is a powerhouse featuring dual motors and the popular Tip ‘N’ Pour
design for maximum performance. Both models come complete with a deluxe 8-piece
tool kit and are available with an optional front mount squeegee attachment for removing
large amounts of liquid fast. Optional HEPA filter is available on 12-gallon model. Choice
of stainless steel or polyethylene housing.
FEATURES
SPECIFICATIONS
n 63dB for whisper quiet operation.
n Equipped with a dolly cart with large rear wheels
for easy transport and greater stability.
n Includes high quality “drop-in” style cloth filter bag for maximum air flow.
n Paper filter bags available on both models plus optional HEPA filters on 12W.
n Powerful 1600-watt dual vac motors on 20W for ultimate suction.
n Two-piece metal wand along with full 1!s” accessory kit included.
n 8’ hose includes full 1.5” swivel connection system for easy handling and
operation.
n Easy water disposal with “Tip ‘N’ Pour” system on 20-gallon and hose
drain system on 12-gallon.
Housing
Capacity
Stainless steel or polyethelene
12/20 gallon
Motor
1200w, single vac, 1.9 HP
1600w, dual vac, 2 HP
CFM
114/192
Water Lift
100/80 inches
Power Cord
33 ft.
Noise Level
63dB
Casters
3 inches
Wheels
6 inches
Dolly
Polyethylene
Tool Kit
8-piece deluxe
OPTIONAL ACCESSORIES
Filter
Washable cloth
Paper Filter
Optional
HEPA Filter
Optional on 12W
335AC
336AC
L11824-1
Hose
15 ft w/1.5” swivel connector
Dimensions
33”H x 19”L x 19”W
36”H x 24”L x 20”W
Weight
30/48 lbs.
Shipping Weight
50/67 lbs.
Ship Dimensions
34”H x 21”L x 21”W
39”H x 25”L x 22”W
Electrical Draw
13 amps
Front-mount squeegee assembly (12-gal)
Front-mount squeegee assembly (20-gal)
Paper filter bag
MODELS
Optional HEPA filter available on 12-gallon models— add “H” to model number (12WH, 12WSH)
12W 12-gallon poly (with 8-piece deluxe tool kit)
12WS 12-gallon stainless steel (with 8-piece deluxe tool kit)
20W
20-gallon poly (with 8-piece deluxe tool kit)
20WS 20-gallon stainless steel (with 8-piece deluxe tool kit)
WARRANTY
1 year on housing, 1 year on parts and labor
24
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
BACK PACK VACUUMS
ATLAS
(patents pending)
After years of careful planning, our new Atlas is taking the backpack vacuum market by storm. Feature for feature, it simply
defies the competition! It’s light enough for anyone to handle
and the ergonomically-designed Velcro straps at the chest and
hips result in a comfortable fit for virtually any sized operator. A
special slide adjustment hooks the shoulder straps together for
a higher range of motion. The on/off switch is at the hip level
and mounted on top for unparalleled ease of operation. Our
unique airflow design makes this unit quieter than most and the
baffled exhaust goes out the back, away from the operator, for a
higher level of comfort. The Atlas comes with our extraordinary
UltrastatTM 3-ply composite filter treated with an anti-microbial
agent that provides exceptional airflow even
when full, allowing for greater productivity. This
exclusive bag is fitted with a durable plastic
rim for an airtight seal around the top, and
the seams are sonically welded (as opposed
to glued). The result is higher dust retention,
and a much longer filtration cycle.
FEATURES
SPECIFICATIONS
6 quart/10 quart
n Longer exhaust chamber and diffused exhaust air for quiet operation.
n EDIC Ultrastat™ filters have better filtration efficiency, greater dust
retention and longer useful life than Micro filter bags because
Ultrastat’s™ revolutionary synthetic material allows greater air flow
even when the bag is full.
n 3-position hip adjustment for wider or narrower hips allows the unit
to sit more comfortably on the hips.
n Ergonomically designed harness with multi-adjustable settings
for optimum comfort.
n Lightweight – only 10 lbs.
n Hip-mounted switch results in easy on/off.
n Precision-molded cloth filter bag rim holds it’s shape to prevent
collapsing inside the unit when the bag is full.
n Optional HEPA filter available on 10-qt units.
n Available in 220-volt.
Watts
1150
MODELS
601TV-HA 6-qt w/standard kit
602TV-HA 6-qt w/industrial kit
603TV-HA 6-qt w/mixed floor kit
605TV-HA 6-qt w/turbo kit
606TV-HA 6-qt w/Sidewinder kit
1001TV-HA 10-qt w/standard Kit
1002TV-HA 10-qt w/industrial kit
1003TV-HA 10-qt w/mixed floor kit
1005TV-HA 10-qt w/turbo kit
1006TV-HA 10-qt w/Sidewinder kit
220-Volt Vac – add “220V” to the end of any 6 or 10-qt model number.
HEPA Filter – add “H” to the end of any 10-qt. model number.
Amps
8.5
CFM
130
Water Lift
110”
Filtration
4 stage
Decibels
65
Thermally Protected
Yes
Construction
Roto-molded polyethelene
4-ft Static dissipating
hose with swivel cuffs
Power cord
Included
50 ft. detachable
5 Disposable
UltrastatTM filters
Cloth Bag
Included
Included
Dimensions
6 Qt.
9 Qt.
23.5”H x 8”L x 8”W
25”H x 9”L x 9”W
Weight
9.8/10.8 lbs.
Ship Weight w/tools
22/23.5 lbs.
Ship Dimensions
6 Qt.
9 Qt.
32”H x 13”L x 13”W
32”H x 13”L x 13”W
WARRANTY
Lifetime on rotationally-molded housing,
2 years on parts and labor
25
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
BACK PACK VACUUM ACCESSORIES
STANDARD TOOL KIT
MIXED FLOOR KIT
TURBO BRUSH KIT
361AC Kit includes carpet tool with
scallops, crevice tool, 2-pc S-bend wand,
dust brush, 5” upholstery tool and
slide-on brush for upholstery tool.
362AC Kit includes standard tool kit plus
14” floor tool with horsehair brush.
363AC Kit includes turbo brush head, telescopic wand, curved wand handle,
crevice tool, dust brush, 5” upholstery
tool, and slide-on brush for upholstery tool.
SIDEWINDER KIT
INDUSTRIAL KIT
364AC Kit includes 14” scalloped
carpet tool, crevice tool, dust brush,
2-pc aluminum straight wand, and
upholstery tool.
365AC Kit includes combo floor tool,
telescopic wand, curved wand handle,
crevice tool, dust brush, 5” upholstery
tool and slide-on brush for upholstery tool.
FILTERS
The revolutionary new Ultrastat™ filters are made
from a high-efficiency synthetic composite treated
with an anti-microbial agent. They have greater
dust retention, better filtration efficiency and
a longer useful life than a standard microfilter
because they provide a much lower pressure drop and therefore better CFM for longer
periods of time. The Ultrastat™ filters are
more durably constructed because the
seams are sonically welded, as opposed to
glued, and the rim is made from a durable
plastic instead of cardboard.
Dome Filter
K12019 5.7” diameter
Ultrastat™ Filter
L12004 6-quart Ultrastat filters (set of 5)
L12006 10-quart Ultrastat filters (set of 5)
Case quantity: 100 filters
TM
TM
Cloth Filter
L12009
L12010
6-quart filter
10-quart filter
26
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
BACK PACK VACUUM ACCESSORIES
ATLAS BACK PACK VACUUM 1.25” ACCESSORIES
G03510
K00700-14
K00700-15
K00700-16
K00728-4
10.5” turbo brush
11” combo floor tool
12” carpet tool, scalloped
12” bare floor tool
5” upholstery tool
K00729-6
13” crevice tool
K00704-1
K00704
K12036
K12036-1
Dust brush, rectangular
Dust brush, round
Floor duster
Replacement floor duster head
K00729-5
9” crevice tool
K00707
K00728-4-1
D03387-1
Adapter, 1.5” to 1.25”
Brush slide for K00728-4
Chrome wand, telescopic w/cord management
D00349-1
D03387
Curved wand handle with swivel connection
Telescopic wand, chrome
ATLAS BACK PACK VACUUM 1.5” ACCESSORIES
K00700-1
K00700-2
K00700-3
K00700-4
K00700-5
14” carpet tool, scalloped
14” carpet tool with easy
glide brush
16” carpet/bare floor tool
with adjustable brush
11” carpet/bare floor tool
with adjustable brush
15” carpet tool, scalloped
27
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
BACK PACK VACUUM ACCESSORIES
ATLAS BACK PACK VACUUM 1.5” ACCESSORIES continued
K00700-7
K00700-8
14” floor tool
with nylon brush
14” floor tool
with horsehair brush
K00700-17
K00700-18
18” Sidewinder carpet tool
K00700-22
15” Sidewinder carpet tool
18” Sidewinder floor tool
with nylon brush
K00700-23
15” Sidewinder carpet tool
K00700-10
14” floor tool with felt
K00700-19
18” Sidewinder floor tool
with horsehair brush
K00700-25
K00700-11
K00700-13
14” floor tool with felt,
scalloped
20” floor tool
with nylon brush
K00700-20 scalloped
K00700-21 standard
K00700-27
8” Sidewinder carpet tool
18” Sidewinder floor tool
with felt
15” Sidewinder carpet tool
K00700-26
K00728-1
K00728-5
K00728-1-1
K00700-6
K00708-3
8” Sidewinder floor tool
with horsehair bristles
5” upholstery tool
5” upholstery tool,
metal
Slide-on brush for
K00728-1 and K00728-5
14” carpet tool,
paddle
Dust brush, rectangular
with swivel neck
K00708-7
Dust brush, round, metal
K00708-1
Dust brush, round
K00729-4
K00714-1
9.5” crevice tool
Pipe cleaner, 1” to 4”
K00729-3
K00729-2
28” crevice tool
15” crevice tool
K00728-3
5” auto upholstery tool
K00714-2
Pipe cleaner, 4” to 8”
J12035
Hose assy, static dissipating
28
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
BACK PACK VACUUM ACCESSORIES
ATLAS BACK PACK VACUUM 1.5” ACCESSORIES continued/SPARE PARTS
D03386-2
D03386-7
Wand, bulk pick up, 36”
S-bend wand, telescopic
D03386
D03386-6
D03386-8
Aluminum wand, 1-PC
Extension wand, telescopic
Aluminum wand, straight, 59”
D03386-1
Aluminum wand, 2-PC
D03386-10
Aluminum extension wand, 59”, Sidewinder
D12909
Aluminum extension wand, 30”, Sidewinder
D03386-9
Aluminum 2-pc wand, Sidewinder
REPLACEMENT PARTS
K00700-3-1
K00700-4-1
16” brush strip for K00700-3
11” brush strip for K00700-4
D03386-1-1
Threaded cap for D03386
K00700-7-1/K00700-9-1
K00700-10-1
14” nylon or horsehair brush for K00700-7 or K00700-9
14” felt blade for K00700-10
D03386-1-2
Metal ring for D03386
K00700-13-1
K00700-11-1
20” brush set
for K00700-13
14” scalloped felt blade
for K00700-11
29
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
DYNAMO CANISTER VACUUM SERIES
CLOSEOUT PRODUCT! WHILE SUPPLIES LAST!
DYNAMO
CANISTER VACUUM SERIES
6W/9W
SPECIFICATIONS
6W/9W
Capacity
6/9 quarts
Motor
1050/1200 watts
CFM
105
Water Lift
100 inches
Electrical Draw
9/10.5 amps
Noise Level
62/59 decibels
Filtration
High/HEPA/ULPA
Power Cord
50 ft. detachable
Hose
8.5 ft.
Wheels
3”, non-marking
Casters
2”, non-marking
Switch guard
Yes
Tool kit
7-piece included
Tool Diameter
1.25 inches
Ship Dimensions
22.5”H x 16”L x 16”W
Weight
14/14.5 lbs.
Shipping Weight w/tools 23.5/24.5 lbs.
Safety Approval
UL/CSA
OPTIONAL ACCESSORIES
L13126 L13127 F7401680 F7401681 F7401682 F7700120 F7700121 F7700122 Paper filter bags, 6W, 10-pack
Paper filter bags, 9W, 10-pack
Standard basket filter (9W only)
Red HEPA basket filter (9W only)
Blue ULPA basket filter (9W only)
Standard cassette filter
Red HEPA cassette filter
Blue ULPA cassette filter
The Dynamo Canister is a go-anywhere, doanything vacuum with revolutionary features
that take practicality to a new level. Need HEPA
filtration? You got it! Need the noise level to be
so quiet workers can make phone calls without
being disturbed? You got it! Want one vacuum
for multiple jobs? You got it! Each model has its own unique features with
versatility and ease at the core. Both vacuums incorporate a unique, colorcoded filtration system that makes it simple to change from high filtration to
HEPA or even to ULPA depending on the job.
We recommend the 6-quart Dynamo for your
everyday cleaning needs, providing durability
and economy over the long haul. The 6W comes
with a lifetime internal filter, which results in a
dramatic reduction in long-term costs.
6W
9W
With its whisper-quiet decibel rating and remarkable filtration system, the 9W is the professional
choice for use in healthcare environments and
busy call centers. It features a double system of
color-coded filters that give you the option of
true high filtration, HEPA or ULPA filtration. An
EDIC exclusive feature on the 9W allows you to
switch the noise level down to a minimum, making it possible to vacuum even while employees
use the phone.
The Dynamo canister vacuum series delivers total ease of operation and
maintenance. A special indicator light lets you know immediately if the cord
or the outlet is defective. The 50-foot power cord is detachable and the
motor slides out for quick repairs. Filters can be swapped out in seconds to
meet individual job requirements. Each unit comes complete with a standard 3-stage filter set and a 7-piece tool kit.
MODELS
6W 6-quart Dynamo with high filtration
9W 9-quart Dynamo with high filtration
WARRANTY
1 year on parts and labor
Easy motor access for quick repairs
Lifetime internal filter on 6W
30
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
7-piece tool kit
CLOSEOUT PRODUCT! WHILE SUPPLIES LAST!
DYNAMO CANISTER VACUUM SERIES
DYNAMO
CANISTER VACUUM SERIES
6W/9W FEATURES
n Units can be turned on their side with the hose facing up for cleaning
hard-to-reach places.
n Unique indicator light lets you know if the power cord or the outlet is
defective for easy troubleshooting.
n Telescoping wand makes it easy to clean high ceilings and walls.
n Switch guard protects the unit from foot operation.
n Removable filters make it easy to switch from high filtration to HEPA or
ULPA depending on the job.
n Motor slides out and power cord is detachable for inexpensive, on-the-spot repairs.
n Exclusive lifetime internal filter on the 6W dramatically reduces long-term
costs.
n Super low decibel rating on the 9W (59 decibels) plus exclusive noise
reduction switch for cleaning during regular work hours, even if someone
is on the phone.
n Special modular design with weight centered in the middle prevents unit
from tipping over.
FILTRATION SYSTEM
Our unique 3-stage filter system is designed for complete flexibility, allowing you
to choose the level of filtration to meet individual job requirements. The system
includes a paper dust bag, the internal filter and a cartridge blow out filter.
n High Filtration—99% of all dust particles up to 3 microns including sand, dust
mites, pollen, mite feces.
9W standard filter set
n HEPA Filtration—99.997% filtration at .3 microns including all of the above
plus red blood cells, bacteria, mite feces dust, yeasts and fungi, tobacco
smoke, virus
n ULPA Filtration—99.999% filtration at .1 microns for maximum cleanliness
including all of the above plus E. Coli and Staph bacteria.
PAPER FILTERS
Our paper vacuum bags are more than a dust container. They are a vital part of
the filtration system. The paper filter can be sealed completely before removing
for a truly clean air system.
6W standard filter set
31
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
DYNAMO WET/DRY VACUUM SERIES
DYNAMO
WET/DRY VACUUM SERIES
5W
The new Dynamo series of wet/dry vacuums combines a
host of impressive features including whisper quiet operation and incredible suction power—at a price that flattens
the competition. The 5-gallon model is perfect for small
spills and pickups without the need to drag out more
cumbersome equipment. This model is compact for easy
transport and storage yet powerful enough for heavy-duty
commercial settings. A special noise
reduction design means you can work
anywhere, anytime without causing a
disturbance. An optional HEPA filter is
available for three-stage filtration. Choice
of stainless steel or polyethylene housing.
FEATURES
SPECIFICATIONS 5W
Housing
Stainless steel or polyethelene
Capacity
5 gallon
Motor
100w, 2-stage, 1.5 HP
CFM
104
Water Lift
86 inches
Power Cord
33 ft.
Noise Level
60dB
Wheels
3” casters
Dolly
Polyethylene
Tool Kit
8-piece
Filter
Cloth
Paper Filter
Optional
HEPA Filter
Optional
Hose
15 ft w/1.5” swivel connector
Dimensions
23”H x 16”L x 16”W
Weight
20 lbs.
Ship Weight w/tools
32 lbs.
Ship Dimensions
25”H x 17.5”L x 17.5”W
Electrical Draw
13 amps
n
n
n
n
n
n
n
60dB for whisper quiet operation.
Equipped with a dolly cart for greater stability.
Includes high quality “drop-in” style cloth filter bag for maximum airflow.
Paper filter bags available plus optional HEPA filters.
2-stage motor with 86-inch lift provides powerful suction.
Two-piece metal wand along with full 1!s” accessory kit included.
8’ swivel hose includes connection system for easy handling and operation.
OPTIONAL ACCESSORY
L11824
Paper filter bag
MODELS
All models available with optional HEPA filter—Add “H” to model number (5WSH, etc.)
5W
5-gallon poly (with 8-piece tool kit)
5WS
5-gallon stainless steel (with 8-piece tool kit)
WARRANTY 1 year on housing,
32
1 year on parts and labor
8-piece tool kit
Deluxe 8-piece tool kit
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
DYNAMO WET/DRY VACUUM SERIES
DYNAMO
WET/DRY VACUUM SERIES
12W/20W
These wet/dry vacuums have the power and capacity to tackle
the really big jobs yet are so quiet you can use them anywhere
without interrupting the work environment. The 12-gallon model
combines large capacity with ease of transportation and storage.
The 20-gallon Dynamo is a powerhouse featuring dual motors
and the popular Tip ‘N’ Pour design for maximum performance.
Both models come complete with a deluxe 8-piece tool kit and
are available with an optional front mount squeegee attachment
for removing large amounts of liquid fast. Optional HEPA filter is
available on 12-gallon model. Choice of stainless steel or polyethylene housing.
Front-mount squeegee
for removing large volumes of water fast!
SPECIFICATIONS
12W/20W
Housing
Stainless steel or polyethelene
Capacity
12/20 gallon
Motor
1200w, single vac, 1.9 HP
1600w, dual vac, 2 HP
CFM
114/192
Water Lift
100/86 inches
Power Cord
33 ft.
Noise Level
63dB
Casters
3 inches
Wheels
6 inches
Dolly
Polyethylene
Tool Kit
8-piece deluxe
Filter
Washable cloth
Paper Filter
Optional
HEPA Filter
Optional on 12W
Hose
15 ft w/1.5” swivel connector
Dimensions
33.5”H x 20”L x 19”W
39”H x 26”L x 22”W
Weight
30/48 lbs.
Ship Weight w/tools
50/67 lbs.
MODELS
Ship Dimensions
w/tools
34.5”H x 21”L x 21”W
39”H x 26”L x 22”W
Optional HEPA filter available on 12-gallon models—
add “H” to model number (12WH, 12WSH)
12W 12-gallon poly (with 8-piece deluxe tool kit)
12WS 12-gallon stainless steel (with 8-piece deluxe tool kit)
20W
20-gallon poly (with 8-piece deluxe tool kit)
20WS 20-gallon stainless steel (with 8-piece deluxe tool kit)
Electrical Draw
13 amps
Tip ‘N’ Pour on
20-gallon model for
easy water disposal.
FEATURES
n 63dB for whisper quiet operation.
n Equipped with a dolly cart with large rear wheels for easy transport and greater stability.
n Includes high quality “drop-in” style cloth filter bag for maximum air flow.
n Paper filter bags available on both models plus optional HEPA filters on 12W.
n Powerful 1600-watt dual vac motors on 20W for ultimate suction.
n Two-piece metal wand along with full 1!s” accessory kit included.
n 8’ hose includes full 1.5” swivel connection system for easy handling and operation.
n Easy water disposal with “Tip ‘N’ Pour” system on
20-gallon and hose drain system on 12-gallon.
OPTIONAL ACCESSORIES
335AC/336AC Front-mount squeegee assembly
L11824-1 Paper filter bag
335AC (24”)
336AC (24”)
WARRANTY
1 year on housing, 1 year on parts/labor
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
33
AUTOMATIC SCRUBBERS/GROUT RESTORATION
PILOT
AUTOMATIC SCRUBBER
Our amazing new automatic scrubber is ideal for deep cleaning of grouted pavers and hard
floors. The Pilot gives you all the performance of larger, more expensive equipment but in a
lightweight, compact size that’s super easy to operate and store. At only 30 lbs, it’s simple to
transport to any job site. The Pilot’s versatility makes it perfect for routine maintenance or periodic deep cleaning, especially in tight, obstructed areas such as restrooms or locker rooms.
The knockout punch of this machine is its rotary brushes. It features a pair of high-speed counter-rotating circular nylon brushes with two levels of bristles that deep-clean grout better than
any cylindrical method. The flexing action of the flared nylon bristles scrubs the most difficult-toclean mosaic tile and stone grouted floors with truly amazing results. Superior urethane squeegee blades allow one-pass cleaning or can be raised to double scrub for restorative cleaning.
The Pilot is the perfect green machine where less is more! It does not require harsh detergents
that can damage sensitive stone and grout surfaces. It uses less
solution, works in tandem with green chemicals and with its single
motor, draws less amps.
EDIC’s Pilot is user friendly and simple to operate and maintain. The
recovery bucket, tank, brushes, squeegee and power cord can be
taken apart in seconds to switch to other accessories. Optional
nylo-grit brushes and pad holders can be attached for surface
polishing and stripping of any hard surface.
SPECIFICATIONS
Brush Motor
120V, 700 watts
Vacuum Motor
Triple fan system Cleaning Width
14 inches
Cleaning Capacity
4,200 sq. ft. per hour
Squeegee
16 inches
Brushes (2)
Circular/nylon bristles
Brush Speed 550 RPM
Brush Pressure
18 lbs.
Solution Tank
1 gallon
Recovery Tank
1 gallon
Wheels (2)
4”, non-marking
Power Cord
25 ft. detachable, 3 ft. pigtail
Dimensions (Upright) 43.75”H x 20”L x 16”W
Weight
30 lbs. Shipping Weight
33 lbs. Ship Dimensions
16”H x 23”L x 16.5”W
Electrical Draw
4.5 amps, 115V
NEW COMPANION PRODUCT!
Easy Mop bucketless cleaning system—cleans
walls, ceilings, and other hard-to-reach places
with no spills, no mess. A pressurized all-inclusive
reservoir cleans up to 3,200 sq. ft. per filling.
See page 16 for additional details.
FEATURES
n Unique dual counter-spinning rotary brushes (not cylindrical) with two levels
of bristles for a deep down clean that outperforms the competition.
n Unbeatable performance in a compact size—only 30 lbs!
n Does the job of heavier, more expensive equipment but can be stored in a
closet and is super easy to maneuver. It even fits on a maid’s cart.
n Low carbon footprint—cleans with green chemicals, uses less solution and
draws less power.
n Truly automatic—simply lower the handle to activate—no on/off switch!
n Comes complete with a high-quality squeegee that leaves floors clean and
completely dry.
n A total cleaning system that promotes clean and sanitized stone, tile and hard floors.
OPTIONAL ACCESSORIES
MODEL
TU1501
TU1505
TU1501T
TU1700PU
F13130 F13131
F13132 1400SC Pilot automatic scrubber
Standard brush set (2)
Pad holder (2)
Nylo-grit brushes (2)
Squeegee assembly
Black stripping pad, 6.5” Green scrub pad, 6.5”
White buffing pad, 6.5”
WARRANTY
1 year on housing,
1 year on parts and labor
34
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
FLOOR MACHINES AND ACCESSORIES
SATURN
LOW SPEED FLOOR MACHINES
No job is too tough for this rugged series of floor machines from EDIC. With its allmetal construction and steel planetary gear boxes, the Saturn can stand up to the
heaviest workloads, yet the ride is surprisingly smooth and quiet. The low speed
models are built specifically to handle the stress associated with stripping and
scrubbing hard floor surfaces as well as bonnet cleaning and shampooing carpets.
Features like the quick and easy handle adjustment, anti-fatigue design, and
the exclusive “lockout lever” for safe two-handed start up make this machine
operator friendly and a winner in every commercial setting. Available in 4 different sizes, there is a perfect low speed Saturn for any size job.
FEATURES
n All-metal construction assures durability.
n All-steel triple planetary gearbox provides heavy duty yet quiet operation.
n Dual-trigger negative pressure switch allows operator to run with
either hand.
n Turn a 13-inch machine into a 20” or any other combination, by removing
just four bolts.
n Exclusive “lockout lever” is designed so operator can safely activate motor
with both hands on the grips.
n Wide-gripping handle locking mechanism guarantees a tight lock and
smooth adjustment.
n Non-marking PVC bumper prevents marks on walls and furniture.
OPTIONAL ACCESSORIES
390AC
1601BR/1901BR 1603BR/1903BR Shampoo tank for carpets
Pad driver with molded-in clutch plate
Two-piece pad driver
For a complete listing of pad drivers, brushes and accessories, see page 39
MODELS All Models 175 RPM
Stainless Steel
13LS3-SS
15LS3-SS
17LS3-SS
20LS3-SS
13” 1.5 HP
15” 1.5 HP
17” 1.5 HP
20” 1.5 HP
WARRANTY
Lifetime on stainless steel brush cover, 3 years on parts and labor
SPECIFICATIONS
Brush Speed
175 RPM
Pad Diameter
13”, 15”, 17” or 20”
Motor
1.5 HP
Gear Box
1.5 HP—triple planetary Power Cord
50 ft. yellow
Brush Cover
Stainless steel
Handle Grips
Soft, anti-fatigue
Handle Chrome-plated steel
Wheels
5 inches
Bumper
Non-marking PVC
Operation Control
All metal, dual on-off
Weight
13” — 91 lbs.
15” — 93 lbs.
17” — 95 lbs.
20” — 98 lbs.
Shipping Weight
13” — 101 lbs.
15” — 106 lbs.
17” — 112 lbs.
20” — 115 lbs.
Ship Dimensions
48”H x 26.5”L x 23”W
Electrical Draw
13” – 14.4 amps
15” – 14.4 amps 17” – 14.4 amps 20” – 14.4 amps
35
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
FLOOR MACHINES AND ACCESSORIES
SATURN HIGH SPEED
BURNISHERS
Available in traditional style or new 17” compact
design with fold-down handle!
The Saturn burnishers make it simple to bring a smooth,
super high-gloss luster to any hard floor surface. Watching
these machines in action will make anyone a believer! The
perfect combination of weight and high speed produces
a spectacular finish in record time. Brand new to the
line-up is a 17” 2000 RPM model with a fold-down
handle and a special compressed design for the
ultimate in portability and storage plus greater
maneuverability in tight spaces. Our traditional 20” models are available in 1500 or
2000 RPM and both the
traditional and fold-down
models are designed with
an all-metal construction
including stainless steel
brush cover, making them
as durable as they are
dependable. All models
come complete with flexlock pad driver and high-speed pad.
SPECIFICATIONS
Brush Speed
17 – 2000 RPM
20 – 1500/2000RPM
Pad Diameter
17”/20”
Motor
1.5 HP
Gear Box
Multi-V belt
Power Cord
75 ft. yellow
Cord Strain Relief
Heavy-duty steel with
spring guard
Brush Cover
Stainless steel
Handle Grips
Soft, anti-fatigue
Handle Chrome-plated steel
Wheels
5 inches
Bumper
Non-marking PVC
Operation Control
switch, left or right hand
Dual trigger on-off safety FEATURES
n Multi-V belt drive reduces load on bearings and extends motor life.
n Smooth operation for reduced operator fatigue.
n Unique lockout system prevents accidental start-ups and allows machine to
be activated with both hands on the grips.
n All-metal chassis plus stainless steel cover assure long life and dependability.
n New 17-inch model folds-down for super easy storage and transportation.
n Cool running 1.5 HP high efficiency motor.
n Rear transport wheels for easy turning and increased mobility.
n Easy motor access for quick servicing.
n 75-foot power cord.
Weight
84/96 lbs.
MODELS
Shipping Weight
96/108 lbs.
Ship Dimensions
54”H x 31”L x 22.5”W
Electrical Draw
11.1 amps
20HS1500-SS
20HS2000-SS
17HS2000F-SS
20” — 1500 RPM high speed
20” — 2000 RPM high speed
17” — 2000 RPM fold-down
WARRANTY
Lifetime
on stainless steel brush cover,
3 years on parts and labor
36
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
FLOOR MACHINES AND ACCESSORIES
SATURN
DUAL SPEED FLOOR MACHINES
Get more bang for your buck with one machine that does the work
of two! Strip, scrub, spray-buff, polish, shampoo, bonnet clean…
you name it, this machine does it all! Designed for professional
floor care maintenance, the dual speed floor machines from EDIC
are equipped with long-wearing steel triple planetary gearboxes,
providing heavy duty yet quiet operation. Safety comes first with
the exclusive “lockout” lever that allows the motor to be activated
while keeping both hands on the handle grips. Use the lower
speed to scrub and strip then just flip the switch to high speed and
polish floors to a glossy luster. Operation is smooth and easy in
even the toughest commercial settings.
FEATURES
n All-metal construction with stainless steel brush cover, heavy
duty chrome-plated steel handle and 66 frame motor assure
durability.
n All steel triple planetary gearbox provides heavy duty yet quiet
operation.
n Turn a 17-inch machine into a 20” machine, or vise versa, by
removing just four bolts.
n Dual trigger negative pressure switch allows operator to run with
either hand.
n Safe two-handed start-up with exclusive “lockout lever”.
n Cool running 1.5 HP high efficiency motor.
n 50-foot power cord.
n Non-marking PVC bumper prevents marks on walls and furniture.
n Available in 17” or 20” diameter.
SPECIFICATIONS
Brush Speed
Dual 180/320 RPM
Diameter
17” or 20”
Motor
1.5 HP/66 frame
Gear Box
Steel triple planetary Power Cord
50 ft. yellow
Cord Strain Relief
Heavy-duty steel with
spring guard
Brush Cover
Stainless steel
OPTIONAL ACCESSORIES
Handle Grips
Soft, anti-fatigue
1601/1901BR
1603/1903BR
Handle Chrome-plated steel
Pad driver, with molded-in clutch plate
Two-piece pad driver
Wheels
5 inches
For a complete listing of pad drivers, brushes and accessories, see page 39
Bumper
Non-marking PVC
MODELS
Operation Control
All metal, dual on-off Weight
86/92 lbs.
Shipping Weight
106/112 lbs.
Ship Dimensions
48”H x 26.5”L x 23”W
Electrical Draw
14.4 amps
17DS3-SS
20DS3-SS
17” — 180/320 RPM dual speed
20” — 180/320 RPM dual speed
WARRANTY
Lifetime on stainless steel brush cover, 3 years on parts and labor
37
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
FLOOR MACHINES AND ACCESSORIES
ACCESSORIES
PAD DRIVERS
1601BR
2004BR
1202BR
1601BR 1603BR
1901BR
1903BR
1704BR
2004BR
F11988
12” block, 13” machine
16” block, 17” machine
molded-in clutch plate
16” block, 17” machine
19” block, 20” machine
molded-in clutch plate
19” block, 20” machine
Flex-lock, 17” hi-speed
Flex-lock, 20” hi-speed
High speed pad
BRUSHES
1505BR
1106BR
1105BR
1505BR
1805BR
1106BR
1506BR
1806BR 1107BR*
1507BR*
1807BR*
Nylon 11” block, 13” machine Nylon 15” block, 17” machine Nylon 18” block, 20” machine
Poly 11” block, 13” machine Poly 15” block, 17” machine Poly 18” block, 20” machine Grit 11” block, 13” machine
Grit 15” block, 17” machine
Grit 18” block, 20” machine
*Grit Brushes are available in the following 4 grades:
#1 Heavy Grit—Equivalent to high pro stripper pad
#2 Medium—Equivalent to black or brown pad
#3 Lite—Equivalent to green or blue pad
#4 Extra Lite—Equivalent to red pad
SHAMPOO TANK
1506BR
1807BR
390AC
Shampoo tank
4-gallon capacity with brass valve
F11988
13” Saturn with
shampoo tank
38
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
SALES AND SERVICE AIDS
RENTAL PROGRAM
Whether you want to get your own private carpet care rental business
up and running or you’re looking for a good way to boost the sales of
your existing business, the EDIC rental program makes it easy. Our
complete rental package is perfect for janitor supply houses, vacuum
dealerships, rental yards, hardware stores or any other business with
walk-in traffic. We provide you with state-of-the-art rental equipment,
professionally-formulated cleaning solutions, instructions for home
use, and advertising and marketing materials. If you’re just starting out
in the carpet care business, this is perfect for consignment to stores or
delivery to homes. For the retail business owner, just set up the rental
package in your store or warehouse and watch your sales grow. At
the heart of the program is EDIC’s amazing FiveStar extractor, offering
powerful cleaning capabilities in a compact unit that’s light enough for
anyone to handle. Choose from our complete package or build your
own package to best suit your needs.
9501R 2-Unit Package
n
n
n
n
n
n
n
2 FiveStar carpet cleaners
2 upholstery kits
1 rental display rack
100 Instruction brochures
1 rental contract book (50 rents)
1 display rack header
Start-up package of cleaning solutions which includes 1 case each of all chemicals listed below plus 2 additional cases of N12104 and 1 additional case of N12105
Build Your Own Package
Tell us what units you want, we’ll design
a customized rental package for you!
Supplies
9020R
9029R
9050R
Spot Cleaner
available in quart-size
spray bottle set
Premium carpet cleaner: cases available
by the gallon, 1/2 gallon or quart
Rack Header
Rental Display Rack­
Rental Receipt Book
Premium Carpet Cleaner
N12101 Quarts, case of 12
N12104 Half gallons, case of 6
N12105 Gallons, case of 6
Additional Chemicals
N12102 Spot & Stain Remover, case of 12
N12100 Pet Stain & Odor Eliminator, case of 12
N12099 Defoamer, case of 12
N12103 Carpet Pre-Spotter, case of 12 spray bottles
39
EDIC • 800-338-3342 • FAX ORDERS TO 323-667-0144 • E-MAIL [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement