Delta-T SPN1-ARM User Manual

Document

1
SPN1/ARM UM-1
29-02-2008
4
Connect the SPN1 signal cable and tie
the cable to the cross arm with the cable
ties provided.
2
Screw the threaded bolt into the SPN1.
This attaches the SPN1 to the cross arm
ball joint .
HOLD
Attach the SPN1/ARM crossarm to an upright.
M8 thread
Bubble level
Ball joint
locking cap
the lever provided.
Level the SPN1 - the bubble should be within
the black ring in the bubble level.
Tighten the locking cap.
Level the SPN1:
3 To
Loosen the locking cap on the ball joint using
Lever
SPN1/ARM Mounting Instructions
HOLD
">

Hello! I am an AI chatbot specifically trained to assist you with the Delta-T SPN1-ARM User Manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Assistant typing

Assistant terminated

Related

Delta-T SPN1 User Manual

SPN1 Sunshine Pyranometer Quick Start Guide - Delta-T

stepper motor driver L6474, motor driver expansion board X-NUCLEO IHM01A1 User Manual

STMicroelectronics X-CUBE-SPN1 User Manual

SMC EX245-SPN1 EX245-SPN2 SI Unit PROFINET Owner's Manual

Delta-T SPN1-MS1 Instruction Sheet

Delta-T SPN1 Technical Note

SMC EX260-SPN1/2/3/4 SI Unit PROFINET Quick Guide

STMicroelectronics X-LINUX-SPN1 User Manual: Motor Control Software

Delta-T GP1 Logger Quick Start Guide - Download PDF

SMC EX245-SPN1 EX245-SPN2 SI Unit PROFINET 取扱説明書

Campbell CM225, CM256, CM261, CM275 Product Manual