HOGGI DURO Rehab pushchair Service Manual
Hoggi Duro is a high-quality rehab pushchair designed for children and adolescents with mobility challenges. It features adjustable seat depth and width, back height and angle, and a variety of accessories for customized support. This manual provides comprehensive instructions for service & maintenance, ensuring safe and effective use of the Duro.
PDF
Download
Document
Advertisement
Advertisement
Partnerschaft für mobile Kinder DURO / DURO Cross Service instructions en DURO / DURO Cross - Service and maintenance instructions Content page 1 Model identification & basic configuration 1.1 Model identification (label)______________________________________________________4 1.2 Basic configuration____________________________________________________________4 2 Overview DURO / DURO Cross____________________________________________________5-6 3 Common information_____________________________________________________________ 7 3.1 3.2 3.3 3.4 3.5 3.6 3.7 Preface_ ___________________________________________________________________ 7 Application__________________________________________________________________ 7 Declaration of conformity_______________________________________________________ 7 Terms of warranty____________________________________________________________ 7 Customer service_ ___________________________________________________________ 8 Service and repairs___________________________________________________________ 8 Packing and shipping instructions________________________________________________ 8 4 Safety instructions_______________________________________________________________ 9 4.1 Meaning of symbols_ _________________________________________________________ 9 4.2 Common safety instructions____________________________________________________ 9 5 Required tools and maintenance schedule___________________________________________10 5.1 Required tools_______________________________________________________________10 5.2 Maintenance schedule_ ____________________________________________________11-12 6 Seat settings ___________________________________________________________________ 13 6.1 Seat width__________________________________________________________________13 6.2 Seat depth_______________________________________________________________14-15 6.3 Back height________________________________________________________________ 15 6.4 Seat angle_________________________________________________________________ 16 6.5 Recline adjustment__________________________________________________________ 16 6.6 Thorax width_______________________________________________________________ 17 6.7 Headrest width_ __________________________________________________________17-18 6.8 Footrest angle______________________________________________________________ 18 7 Maintenance schedule ___________________________________________________________ 19 7.1 Front frame________________________________________________________________ 19 7.2 Rear frame and rear axle_ ____________________________________________________ 19 7.3 Push bar_ _______________________________________________________________19-20 7.4 Seat and back bearing_ ______________________________________________________ 20 7.5 Seat surface and seat frame___________________________________________________ 20 7.6 Thigh supports______________________________________________________________ 21 7.7 Hip supports_ ______________________________________________________________ 21 7.8 Back base_________________________________________________________________ 21 7.9 Back insert_________________________________________________________________ 22 7.10 Individual upholstery system___________________________________________________ 22 7.11 7.12 7.13 7.14 7.15 7.16 7.17 7.18 7.19 7.20 7.21 7.22 7.23 7.24 7.25 7.26 7.27 7.28 Footrest hanger_____________________________________________________________ 22 Footrest holder_ __________________________________________________________22-23 Footrests__________________________________________________________________ 23 Front wheels_____________________________________________________________23-24 Swivel lock_________________________________________________________________ 24 Rear wheels_ ______________________________________________________________ 24 Braking system___________________________________________________________24-26 Accessory bag______________________________________________________________ 26 Tie down kit________________________________________________________________ 26 Headrest pads____________________________________________________________26-27 Thorax pads__ _____________________________________________________________ 27 Abduction block_____________________________________________________________ 27 Retainer for accessories______________________________________________________ 27 Grab rail___________________________________________________________________ 27 Therapy tray_ ______________________________________________________________ 28 Belt fixations_ ____________________________________________________________28-29 Winter warmer______________________________________________________________ 29 Canopy_ __________________________________________________________________ 30 8 Operating life __________________________________________________________________ 31 9 Specifications __________________________________________________________________ 31 1.1 Model identification The label is attached on the upper side of the seat plate (front left). Colour code Article number Gr. X Size / variant 2021/04/22 DURO / DURO Cross max. load (01)04047349096062(21)202178999 2021178999 Hoggi GmbH Eulerstr. 27 56235 Ransbach-Baumbach MADE IN GERMANY 321X-0001-052 Serial number 75kg CE label 321X-0001-052 DURO / DURO Cross Classification / Product name 2021/04/22 Gr. X max. load (01)04047349096062(21)202178999 2021178999 Hoggi GmbH Eulerstr. 27 56235 Ransbach-Baumbach MADE IN GERMANY Date of manufacture 75kg Maximum load / load capacity 321X-0001-052 Manufacturer DURO / DURO Cross max. load (01)04047349096062(21)202178999 Place of manufacture 2021/04/22 Gr. X 2021178999 Hoggi GmbH Eulerstr. 27 56235 Ransbach-Baumbach MADE IN GERMANY Year of manufacture UDI code 75kg 1.2 Basic configuration - DURO // DURO Cross rehab pushchair - Front and rear wheels with air or PU tires - Drum brake wheels with PU tyres or pneumatic tyres (only for DURO Cross) - Padding (IUS) - Thigh supports - Support angle - Footrest hanger - Foot rest bracket und footrest with heel stop 4 2 Overview DURO 2.1 DURO 4 8 7 5 5 6 2 9 11 1 3 10 Pos 1 2 3 4 5 6 7 8 9 10 11 12 12 Article number 3211-1100 3212-1100 3211-1200 3212-1200 3211-1300E 3212-1300E 3211-1400 3212-1400 3211-1500 3211-1700 3212-1700 Component group Front frame DURO size 1 Front frame DURO size 2 Rear frame DURO size 1 Rear frame DURO size 2 Break size 1 Break size 2 Pushbar DURO size 1 Pushbar DURO size 2 Seat and backrest retainer Seat surface DURO size 1 Seat surface DURO size 2 3211-2300 3212-2300 3211-2800 3212-2800 3211-2400 2312-2400 Back base DURO size 1 Back base DURO size 2 Back insert DURO size 1 Back insert DURO size 2 3245-4302 12xx-xxxx 12xx-xxxx Page 5 6 7 10 11 12 15 17 19 Footrest hanger DURO size 1 Footrest hanger DURO size 2 Foot rest Rear wheel Front wheel 20 24 24 5 2.2 DURO Cross 8 13 11 12 9 7 9 3 9 4 4 5 1 4 6 1 1 10 1 2 1 1 1 Pos Article number Articel description Quantity Unit 1 2-13 2 3 4 5 6 7 1219-0040 1219-0041 1229-0040 1229-0041 3214-1290E 1052-0012 1029-0650 1051-0006 1114-0018 1049-0066 1209-0001 8 9 10 11 12 13 1209-0008 1089-0004 1209-0007 1039-0001 1149-0003 1205-0054 Pneumatic wheel black 16 x 1,75", black 5 spoke, drum brake left side Pneumatic wheel black 16 x 1,75", black 5 spoke, drum brake right side PU-wheel black 400x40, black 5 spoke, drum brake left side PU-wheel black 400x40, black 5 spoke, drum brake right side Duro cross break assembly parts Spring washer B12 Button head socket screw M6x50 Washer A6,4 Bushing 8x0,8x14,5 BILOC-nut M6 Bowden wire set, complete 112cm cable Brake lever 80° manually locking 22 mm (for push-bar) Cable tie, black, 5x180 End cap aluminium for Bowden cable wire Screw for plastic, cross rcessed pan head w. flange 4x10 Cable clip d 6,4 / 8 mm, black Bowden cable guide flex 6 1 1 1 1 1 2 2 6 2 2 2 2 2 2 2 6 6 Pc. Pc. Pc. Pc. Set Pc. Pc. Pc. Pc. Pc. Pc. Pc. Pc. Pc. Pc. Pc. Pc. 3 Common Information 3.1 Preface Thank you for selecting the DURO / DURO Cross rehab pushchair. We have designed this high-quality product to make your life safer and easier, and we’ve included this manual to help you use and care for it. Please read the following instructions to make sure you use this product as recommended. If you have any further questions, or if you have any problems, please contact your healthcare provider. We hope that DURO / DURO Cross meets your expectations. We reserve technical modifications regarding the specified model in this manual. Before using the rehab pushchair the first time, this manual has to be read and understood by patient and support personnel in oder to ensure a safe handling with the rehab pushchair. Regular maintenance is important - it increases safety and prolongs the life of the product. Every rehab product should be checked and serviced once a year. However, it is recommended to check, readjust and, if necessary, service products with a high frequency of use, with users in growth or users with a changing clinical picture at 6-month intervals. Only original spare parts should be used for all service and maintenance work. The service and maintenance work described here should only be carried out by trained specialist personnel and not by the user of the aid. These service and maintenance instructions refer to the respective spare parts catalogs and operating instructions of the products described. Please use all documents together. Use the maintenance schedule (Chapter 5.2, Checklist to tick off) as a copy template. Retain completed maintenance schedules and provide a copy to the customer. DURO User manual DURO Spare parts catalog 1910-0048-EN 1910-1048-EN 3.2 Application Rehab pushchairs, paediatric postural positioning systems or strollers are appropriate for childern and adolescents who are unable to walk or who have a walking impediment and thus requiring mobility assistance. Assistance may be required due to: • Atypical muscle tone • Loss of limbs (dysmelia/lower limb amputation) • Limb defect and / or deformity • Joint contractures • Joint defects • Other diseases The DURO / DURO Cross rehab pushchair is able to be used indoor and outdoor as well as for further service. For further service the product has to be cleaned and sanitised efficiently. Afterwards the product has to be checked concerning condition, wearout and damage by an authorised technician. All damaged and inapropptiate parts need to be changed. Please see also the service manual for detailled information. 3.3 Declaration of Conformity HOGGI GmbH as manufacturer declares under sole responsibility that the rehab-pushchair for kids and adolescents DURO / DURO Cross meets the general safety and performance requirements to Annex I of the Regulation (EU) 2017/745 of the European Parliament and of the Council. Harmonised European Standards have been applied. Applicable harmonized standards have been applied. DURO / DURO Cross meets the requirements of ISO 7176-8, DIN EN ISO 12182 and DIN EN ISO 12183. 3.4 Terms of Warranty Warranty applies only when the product is used according to the specified conditions and for the intended purposes, following all manufacturer’s recommendations.The manufacturer is not responsible for damages caused by components and spare parts not approved by the manufacturer. See also § 8 of terms and conditions on: www.hoggi.de 7 3.5 Customer service Our customer service will be happy to answer any technical questions you may have. Please refer to the last page for contact addresses and telephone numbers. 3.6 Service and repairs Service and repairs on the DURO / DURO Cross rehab pushchair may only be carried out by your specialist dealer. In case of problems, contact your responsible specialist dealer. In case of repairs, you will only receive original spare parts there. Spare parts and replacement units are available during the entire service life of the product, but only for a maximum of 2 years after the sale of the last product in this series. The wheelchair is custom made for the first time user. Therefore, no replacement wheelchair is available in the initial configuration. In order to ensure a correct spare parts delivery the serial no. of your wheelchair is required. We are happy to help you find a dealer close to you. You can reach us at: [email protected] 3.7 Packing and shipping instructions If DURO / DURO Cross has to be sent back to the manufacturer for repair or exchange, the product must be thoroughly cleaned/disinfected beforehand and put in a hygienically safe condition. Packaging is done by wrapping the product in a clean film, ideally with air cushions and the subsequent use of a sufficiently large cardboard box, so that no transport damage can occur. 8 4 Safety instructions 4.1 Meaning of symbols Caution! Warning of possible danger of accident and injury. Warning of possible technical damage. Information! About use of product. Information! For service-personnel. Attention! Read manual before use! 4.2 Common safety instructions For all maintenance and repair work, you should generally observe a few points: Attention! Familiarize yourself with the functions of the product. If you are not familiar with the product, study the user manual before testing. If no user mauals are available, request them from us. You can also download documents from our homepage at: www.hoggi.de Attention! Study the service and maintenance instructions before starting work. Attention! Use suitable tools (see page 4 ff.). Attention! Wear suitable clothing and, if necessary, gloves and protective goggles. Attention! Secure the product from tipping over or falling down, e.g. from the workbench. Attention! Clean / disinfect the product before starting the test. If necessary, observe the instructions in the user manual and product-specific test instructions. Note! Screws and nuts with thread locking are used for a large number of screw connections. If you have to open such screw connections, replace the respective nut or screw with one with new thread locking. If new nuts or bolts with thread locking are not available, use liquid thread locking compound with medium strength (e.g. Loctite 241 or Euro Lock A24.20). 9 5 Required tools and maintenance schedule 5.1 Required tools The following list shows the tools and utilities required for service. Reversible ratchet and sockets size 8-24 Torque wrench Measuring ranges 5-50 Nm Wrench Size 6 - 24 Hexagon wrench Gr. 3 - Screwdriver Blade width 2.5 3.5 and 5.5 Phillips screwdriver Size 2 Plastic hammer Hammer approx. 300 g Carpet knife with sickle and standard blade Side cutter Liquid thread locking „medium strength“ Riveting pliers for rivets up to 5 mm 10 5.2 Maintenance schedule Pos. Customer: ............................................... DURO / DURO Cross Basic product Check (Checklist to tick off ) Area Serial number: 1.) Function / Setting (siehe Bedienungsanleitung) ....................................... 2.) none damage / deformation 3.) Screw connections o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o Basic product 1.1 Front frame 1.2 Rear frame and rear axle - Parking brake 1.3 Push bar - Folding mechanism - Locking - Angle adjustment of the push handle 1.4 Seat and back bearing - Back angle adjustment - Seat angle adjustment - Seat depth adjustment 1.5 Seat base and seat frame - Seat depth adjustment 1.6 Thigh support/ Hip support - Seat width adjustment - Depth adjustment hip supports - Remove (hip supports) 1.7 Back base - Recline - Remove back 1.8 Back insertion - Back height adjustment 1.9 Individual upholstery system - Damage 1.10 Footrest - Angle adjustment - Height adjustment - Footrest angle - Locking (optional) 1.11 Front wheels - Tires - Air pressure - Running behavior of the wheels - Swivelling the wheel forks 1.12 Swivel lock - Locking device - Straight run 1.13 Rear wheels - Tires - Air pressure - Running behavior of the wheels - Quick release 1.14 Braking system - Brakes Do the settings on the base frame meet the user‘s requirements? o o o o o o o Notes: 11 o 5.2 Maintenance schedule Pos. Accessories Check (Checklist to tick off ) Area Serial number: ....................................... Customer: ............................................... DURO / DURO Cross 1.) Function / Setting (siehe Bedienungsanleitung) 2.) none damage / deformation 3.) Screw connections o o o o o o o o o o o o o o o o o o o o o o o o o Accessories 2.1 Storage bag - Fold with 2.2 Tie down kit - Damages 2.3 Headrest pads - Width adjustment 2.4 Thorax support - Width & height adjustment 2.5 Abduction block (accessories) 2.6 Retainer 2.7 Grab rail (accessories) - Locking (tripod springs) 2.8 Therapy tray (accessories) - Locking (tripod springs) - Angle adjustment - Depth adjustment 2.9 Belt fixings: Lap belt, five-point harness, foot belts, ankle huger, groin strap, fixation jacket, chest-shoulder pad - Closures 2.10 Winter warmer - Damage 2.11 Canopies (accessories) - Angle adjustment of canopy - Plug connection to the adapter Do the seat unit settings meet the user‘s requirements? o o o o o o o o o o Notes: The maintenance was performed by: .............................................................. on: ...................................... 12 6. Seat settings 6.1 Seat width The seat width of the DURO / DURO Cross can be adjusted by moving the thigh - or the hip supports. The following adjustment ranges result for the two sizes: Size 1: 23 - 34 cm Size 2: 28 - 39 cm The pad is secured to the seat panel by a screw connection. The desired seat widths can be achieved by shifting in 2 slotted holes. In addition, the depth positioning can be adjusted. Wing nut screws on the underside of the seat plate secure the connection. An additionally attached nut serves as protection against loss and should always be mounted. Adjustment range narrow and front Adjustment range wide and rear 13 6.2 Seat depth Bingo Evolution offers an enormous ability to grow with the seat depth. The following adjustment ranges result for the two sizes: Size 1: Size 2: 26 - 40 cm 31 - 45 cm Measuring point front edge of seat panel to back tube In order to adjust the seat depth, a total of 4 screw connections must be loosened. These are located on the underside where the seat frame is bolted to the support brackets. First, the front screws are loosened. Then loosen the rear screw connections. The seat panel can now be moved forwards or backwards to the desired size. Finally, tighten all screw connections again! Smallest seat depth 14 Largest seat depth 6.3 Back height Depending on the size, DURO / DURP Cross offers different adjustable back heights. Size 1: SIze 2: 45 - 63 cm 61 - 83 cm By opening the indicated wing nut screws, the upper back section can be pulled out or pushed in opposite the base. Back height low Back height low Back telescoped 15 6.4 Seat angle DURO / DURO Cross allows two different seat angles to be preset. 16° and 20°. The adjustment is made by screwing the rear strut opposite the support angle. Depending on which of the indicated holes the screw connection is made, a different seat angle is set. Screw connection in the upper hole: 20° Screw connection in the lower hole: 16° 6.5 Recline The back angle of the DURO / DURO Cross can be adjusted between 78° and 120° in 8 positions relative to the seat surface. The desired back angle can be set with the help of the locking bolt. In addition, the back section can also be easily folded down and removed. 16 6.6 Width thorax Optional thorax pelotte pads can be used to generate lateral upper body support. The pads can be adapted precisely to the user. They are adjustable in width, height and angle. By loosening the indicated wing nut, the distance between both pads and also the height can be adjusted. The minimum and maximum adjustable distance for the sizes: Size 1: 12-22 cm Size 2: 17-27 cm By loosening the front screw connection the angle of the pad can be adjusted. 6.7 Width headrests DURO & DURO Cross can be equipped with the standard headrests, as well as with a low form Low form: Provides a total adjustment range of 2 cm by sliding in 1 cm slotted holes in the pad support. Distance between supports: Size 1: 14-16 cm Size 2: 18-20 cm Standard: In addition to the adjustment range in the beam, offers an additional adjustment possibility by gluing in 3x1 cm wide foam inserts per side. 17 Adjustment range of the slotted holes in the pad support. 3 foam inserts with self-adhesive film. If the inserts are glued to the inside of the pad support, the distance between the sides is reduced by 1 cm. This means that with a maximum of 6 inserts, the area can be additionally reduced by a total of 6 cm. This results in for: Size 1: 8-16 cm Size 2: 13-21 cm 6.8 Footrest angle The footrest angle is preset to 90°. The adjustment range is +- 10° (80° - 100°). After loosening the four marked screw connections on the footrest holder the footrest can be adjusted in depth. This changes the anchor point of the footrest and thus also the footrest angle. The further the footrest is pulled out to the front, the the greater the angle. If the procedure is reversed the angle decreases accordingly. 18 7. Maintenance schedule 7.1 Front frame - Check for general damage, bending - Checking the screw connections to the support bracket 7.2 Rear frame and rear axle Rear frame DURO - Check for general damage - Brake function of the parking brake - Brake rod bearing and brake pedal retention - Checking the screw connections to the slider, rear axle tube and to the connector Rear frame DURO Cross - Check for general damage - Checking the screw connections to the slider and the clamp 7.3 Push bar - Check for general damage - Folding in via the release button - Angle adjustment of the upper part of the push bar via the ratchet joints - Latching of the push bail in unfolded state - Locking of the push bar in the unfolded state, bolt must release from the lock when folded and lock in the rear frame joint when unfolded. 19 Check of the screw connections: - Lower screw connection of the lower part of the push bar to the slider - Fastening of the release button - Rivet connection of the ratchet joint 7.4 Seat and back bearing - Check for general damage - Seat depth adjustment - Back angle adjustment - Folding in and removing the back Check of the screw connections: - Screw connection of support brackets to the front frame - Screw connection of support brackets to the seat frame 7.5 Seating surface and seat frame - Check for general damage - Check of the seat depth adjustment - Check of the screw connections from the seat panel to the seat frame - If present, inspection of riveted connections or attached brackets for straps 20 7.6 Thigh supports - Check for general damage - Depth and width adjustment of the pad support - Check of the screw connections to the seat panel 7.7 Hip supports - Check for general damage - Depth and width adjustment of the pad support - Check of the screw connections to the seat panel - Removing the hip support 7.8 Back base Removable back base - Check for general damages - Removing the back part - Checking the screw connection to the guide block - Back angle adjustment via locking pin pull 21 7.9 Back insert Size 1/2 - Check for general damage - Damage to the edge protection - Height adjustment / telescoping - Removal of the slide-in unit - Check of the screw connection for height adjustment 7.10 Individual upholstery system - Check for general damage or impurities - Wear of the upholstered surfaces 7.11 Footrest hanger Functional test: - Check for general damage - Angle adjustment - Checking the dynamics if installed - Screw connection to the seat frame 7.12 Footrest holder Standard Functional test: - Height adjustment - Check for general damage - Swivel mechanism of the screwed footrest - Correct adjustment of the foot angle - Sliding of the holder on the tubes With interlock Functional test: - Height adjustment - Check for general damage - Swivel mechanism of the screwed footrest - Correct adjustment of the foot angle - Sliding of the holder on the tubes - Locking bolt pull with locking latches, tension of the rope 22 Check of the screw connections: - Screw connection to the footrest with correct angle adjustment - Screws for lower leg length adjustment - Screwing of the swivel mechanism 7.13 Footrest Footrest standard with heel edge Functional test: - Check for general damage - Screw connection to the footrest support 7.14 Front wheels - Plastic or aluminium fork - Check for general damage - Checking the tread or profile (cracks, heavy wear) - Impurities - Checking the air pressure in the case of pneumatic tyres - Camber of the wheel worn too much 23 Check of the bolted connections: - Screw connection of the wheel axle - Bolting of the steering fork axle to the frame Make sure that the steering fork is set up as follows! The sealing washer with the O-ring prevents excessive „fluttering“ of the steering forks. The screw must be tightened accordingly with 40 Nm!! 7.15 Swivel lock - Check for general damage - Check of the latch - Check of the straight run 7.16 Rear wheels - Air or PU tyres - Check for general damage (storage) - Running behaviour of the wheels - Checking the treads and tyre pressure (if pneumatic tyres) - Checking the quick release fastener 7.17 Braking system DURO / DURO Cross can be equipped with 3 brake variants! Parking brake: - Basic configuration - Not in combination with drum brake wheels - Easily replaceable - Locking when locked? - Pivoting 24 Brake for attendant - Check for general damage - Check of the brake levers - Check of the Bowden cable - Check of the screw connection of the brake levers to the push bar - Build-up of the brake pressure (readjustment of the adjusting screw) Wheel with aluminum brake disc - Check of the holes (knocked out, broken bars) - Impurities Drum brake - Check for general damage - Check of the brake levers - Check of the red locking lever - Check of the Bowden cable - Check of the screw connection of the brake levers to the push bar - Build-up of the brake pressure (readjustment of the adjusting screw) - Contamination of the brake shoes 25 Check of the drum brake wheel 7.18 Accessory bag - 3 kg loadable - Check for general damage - Fastening points ok - Can the bag be folded without problems Shown here is the large bag with a load capacity of up to 8 kg. 7.19 Tie down kit Front securing eyelets - Check for general damage (deformation, sharp edges). - Check of the screw connections to the frame and to the edge skid Rear securing eyelets - Check of the screw connections to the frame 7.20 Headrest pads Standard - Check for general damage (Velcro fastening, seams, holes or strapped-through areas) - Check for impurities - Insertion pad - Function of the width adjustment via the pad support 26 Low version: - Check for general damage (Velcro fastening, seams, holes or strapped-through areas) - Check for impurities - Insertion pad - Function of the width adjustment via the pad support 7.21 Thorax pads - Check for general damage - Height and angle adjustment via wing nut on the rear side - Angle adjustment of the pelotte carrier from the front 7.22 Abduction block Functional test: - Check for general damage - Pivoting and latching mechanism - Removal Check of the screw connections: - Bracket abduction block to the seat panel 7.23 Retainer for accessories Necessary for use of therapy tray or grab rail - Check for general damage - Screw connection of the bracket to the seat base 7.24 Grab rail Functional test: - Check for general damage - Damage to the cover - Check of the tripod springs and the anchoring in the retainer for accessories 27 7.25 Therapy tray Standard Functional test: - Check for general damage - Damage of angle adjustment and depth adjustment - Check of the tripod springs and the anchoring in the retainer for accessories Height adjustable Functional test: - Check for general damage - Damage of angle adjustment and depth adjustment - Height adjustment - Check of the tripod springs and the anchoring in the retainer for accessories 7.26 Belt fixations Lap belt Functional test: - Check for general damage - Check of the fastener - Check of the screw connection of the bracket 4-point lap belt Functional test: - Check for general damage - Check of the fastener - Check of the screw connection of the bracket Ankle huger Functional test: - Check for general damage - Check of the fastener - Check of the screw connection of the bracket to the footrest 28 Five-point harness Functional test: - Check for general damage - Check of the fastener - Check of the screw connection of the brackets Groin strap Functional test: - Check for general damage - Check of the fastener - Check of the screw connection of the brackets Fixation jacket Functional test: - Check for general damage - Check of the fastener - Check of the screw connection of the brackets - Function of the buckles on the back panel - Rivet connection of the clamping buckles Chest-shoulder harness Functional test: - Check for general damage - Check of the fastener - Check of the screw connection of the brackets - Function of the buckles on the back panel - Rivet connection of the clamping buckles 7.27 Winter warmer Functional test: - Check for general damage - Zipper intact - Damage to the real fur insert if present 29 7.28 Canopy Functional test: - Check for general damage - Folding and unfolding of the canopy - Removal via canopy adapter - Checking the screw connections of the adapter to the back bar 30 8. DURO & DURO Cross operating life:: The expected operating life of the DURO & DURO Cross is 5 years, depending on the intensity of use, care as well as maintenance. We recommend an annual inspection by the authorized specialist dealer. In case of malfunctions or defects of the wheelchair, it must be immediately handed over to the medical supply store or the specialist dealer. 9 Speficications DURO (Size 1 / Size. 2) DURO Cross (Size 1 / Size 2) Seat width 230 - 340 mm / 280 - 390 mm 230 - 340 mm / 280 - 390 mm Seat depth 260 - 400 mm / 310 - 450 mm 260 - 450 mm / 350 - 450 mm Seat angle 16° or 20° 16° or 20° Back height 450 - 630 mm / 610 - 830 mm 450 - 630 mm / 610 - 830 mm Recline 78° - 120° 78° - 120° Knee angle 80 - 120° 80 - 120° Lower leg length 200 - 440 mm 200 - 440 mm Rear wheel diameter 300 x 60 mm 400 x 60 mm Steering wheel diameter 200 x 50 mm 200 x 50 mm Horizontal position of the axis 150 mm 200 mm Static stability: to the front / to the rear / to the side max. 14° / max. 24° / max. 19° max. 14° / max. 24° / max. 19° Minimum turning radius 1460 mm 1400 mm User weight/ Maximum load* 75 kg 75 kg Weight** 15,8 kg / 16,6 kg 16,4 kg / 17,2 kg Height when folded 380 mm 400 mm Total length Maximum Minimum 1240 mm 840 mm 1240 mm 840 mm Total width Maximum Minimum 630 mm 620 mm 680 mm 670 mm Height 1010 mm 1010 mm Weight of the heaviest part (seat unit) 14,6 kg 15,4 kg CAUTION! *Accessories and add-ons reduce the remaining load capacity for the passenger proportionaly. CAUTION! **The weights refer to a DURO / DURO Cross in basic configuration. 31 Eulerstraße 27 • 56235 Ransbach-Baumbach • Deutschland Telefon: (+49) 2623 / 92 499-0 E-mail: [email protected] • www.hoggi.de © by HOGGI GmbH_1910-2048-EN_04_2024 HOGGI GmbH ">

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Adjustable Seat Depth & Width
- Adjustable Back Height & Angle
- Multiple Brake Options
- Individual Upholstery System
- Footrest Angle Adjustment
- Accessories: Therapy Tray, Grab Rail, Headrest Pads
Frequently asked questions
Hoggi recommends an annual inspection. However, for high-frequency use, users in growth, or those with changing needs, it is recommended to service the chair every 6 months.
The Hoggi Duro comes with a parking brake in the basic configuration. It can also be equipped with a brake for the attendant or drum brakes. (It's important to note that drum brakes are only available for the Duro Cross model.