HOGGI BINGO Evolution Cross Rehab pushchair Service Manual
Hoggi BINGO Evolution Cross is a rehab pushchair designed for children and adolescents needing mobility assistance. It features a robust chassis, adjustable seat and back, and various safety features. It's ideal for indoor and outdoor use, providing comfort and support for growing individuals.
PDF
Download
Document
Advertisement
Advertisement
Partnerschaft für mobile Kinder BINGO Evolution Service instructions en BINGO Evolution- Service and maintenance instructions Content Page 1 Model identification & basic configuration 1.1 Model identification (label)______________________________________________________ 4 1.2 Basic configuration___________________________________________________________ 4 2 Overview BINGO Evolution______________________________________________________5-12 3 Common information____________________________________________________________ 14 3.1 3.2 3.3 3.4 3.5 3.6 3.7 Preface___________________________________________________________________ 14 Application_________________________________________________________________ 14 Declaration of conformity______________________________________________________ 14 Terms of warranty___________________________________________________________ 14 Customer service___________________________________________________________ 15 Service and repairs__________________________________________________________ 15 Packing and shipping instructions_______________________________________________ 15 4 Safety Instructions______________________________________________________________ 16 3.1 Meaning of symbols_________________________________________________________ 16 3.2 Common safety instructions___________________________________________________ 16 5 Required tools and maintenance schedule__________________________________________ 17 5.1 Required tools______________________________________________________________ 17 5.2 Maintenance schedule_____________________________________________________18-19 6 Seat settings ___________________________________________________________________ 20 6.1 Seat height + lower leg length__________________________________________________ 20 6.2 Footrest angle______________________________________________________________ 21 6.3 Seat width_________________________________________________________________ 21 6.4 Seat depth_________________________________________________________________ 22 6.5 Back height______________________________________________________________22-23 6.6 Thorax width_____________________________________________________________23-24 6.7 Headrest width_____________________________________________________________ 24 6.8 Seat angle adjustment________________________________________________________ 25 6.9 Recline ___________________________________________________________________ 25 7 Maintenance schedule ___________________________________________________________ 26 7.1 Chassis_________________________________________________________________26-27 7.2 Front strut_________________________________________________________________ 27 7.3 Rear frame________________________________________________________________ 27 7.4 Rear axle__________________________________________________________________ 27 7.5 Push bar__________________________________________________________________ 28 7.6 Seat bearing_______________________________________________________________ 28 7.7 Front wheels_______________________________________________________________ 29 7.8 Rear wheels_______________________________________________________________ 30 7.9 Accessory bag______________________________________________________________ 30 7.10 Braking system___________________________________________________________30-31 7.11 7.12 7.13 7.14 7.15 7.16 7.17 7.18 7.19 7.20 7.21 7.22 7.23 7.24 7.25 7.26 7.27 7.28 7.29 7.30 7.31 7.32 Tie down kit________________________________________________________________ 31 Swivel lock_________________________________________________________________ 32 Seat base_________________________________________________________________ 32 Seating surface_____________________________________________________________ 32 Thigh supports______________________________________________________________ 32 Hip supports_______________________________________________________________ 33 Lateral supports_____________________________________________________________ 33 Back base_______________________________________________________________33-34 Back insert_________________________________________________________________ 34 Individual upholstery system___________________________________________________ 35 Footrest hanger_____________________________________________________________ 35 Footrest holder___________________________________________________________35-36 Footrests__________________________________________________________________ 36 Headrest pads____________________________________________________________36-37 Thorax pads_______________________________________________________________ 37 Belt fixations_____________________________________________________________37-38 Abduction block_____________________________________________________________ 38 Grab rail___________________________________________________________________ 39 Therapy tray_______________________________________________________________ 39 Retainer for accessories______________________________________________________ 39 Winter warmer______________________________________________________________ 39 Canopy___________________________________________________________________ 40 8 Operating life __________________________________________________________________ 41 9 Specifications ________________________________________________________________41-42 1 Model identification 1.1 Model identification (label) The BINGO Evolution mobility base label is is mounted on the inside of the left side strut and under the seat panel. Colour code Article number 3234-1000-052 Straßengestell Gr. 2 Lenkräder, vorne 2021/04/21 BINGO Evolution max. load (01)04047349096062(21)202178999 2021178999 Hoggi GmbH Eulerstr. 27 56235 Ransbach-Baumbach MADE IN GERMANY Serial number 60kg CE label 3234-1000-052 Classification / Product name Straßengestell Gr. 2 Lenkräder, vorne 2021/04/21 BINGO Evolution max. load (01)04047349096062(21)202178999 2021178999 Hoggi GmbH Eulerstr. 27 56235 Ransbach-Baumbach MADE IN GERMANY Date of manufacture 60kg Maximum load / load capacity 3234-1000-052 BINGO Evolution max. load (01)04047349096062(21)202178999 Manufacturer Place of manufacture 2021/04/21 Straßengestell Gr. 2 Lenkräder, vorne 2021178999 Hoggi GmbH Eulerstr. 27 56235 Ransbach-Baumbach MADE IN GERMANY Year of manufacture UDI Code 60kg 1.2 Basic configuration - Bingo Evolution rehab pushchair (Mobility base and seat unit) - Front and rear wheels with air or PU tires - Padding (IUS) - Thigh supports - Footrest hanger - Foot rest bracket und footrest 4 2 Overview BINGO Evolution 2.1 Mobility base, swiveling 5 2.2 Mobility base, rigid 6 2.3 Mobility base for respiratory equipment 7 2.4 Mobility base Trike 8 2.5 Mobility base mini 9 2.6 Mobility base Cross 10 2.7 Seat unit 11 2.8 Seat unit mini 12 3 Common Information 3.1 Preface Thank you for selecting the BINGO Evolution rehab pushchair. We have designed this high-quality product to make your life safer and easier, and we’ve included this manual to help you use and care for it. Please read the following instructions to make sure you use this product as recommended. If you have any further questions, or if you have any problems, please contact your healthcare provider. We hope that BINGO Evolution meets your expectations. We reserve technical modifications regarding the specified model in this manual. Before using the rehab pushchair the first time, this manual has to be read and understood by patient and support personnel in oder to ensure a safe handling with the rehab pushchair. Regular maintenance is important - it increases safety and prolongs the life of the product. Every rehab product should be checked and serviced once a year. However, it is recommended to check, readjust and, if necessary, service products with a high frequency of use, with users in growth or users with a changing clinical picture at 6-month intervals. Only original spare parts should be used for all service and maintenance work. The service and maintenance work described here should only be carried out by trained specialist personnel and not by the user of the aid. These service and maintenance instructions refer to the respective spare parts catalogs and operating instructions of the products described. Please use all documents together. Use the maintenance schedule (Chapter 5.2, Checklist to tick off) as a copy template. Retain completed maintenance schedules and provide a copy to the customer. Bingo Evolution User manual Bingo Evolution Spare parts catalog 1910-0030-EN 1910-1006-EN 3.2 Application Rehab pushchairs, paediatric postural positioning systems or strollers are appropriate for childern and adolescents who are unable to walk or who have a walking impediment and thus requiring mobility assistance. Assistance may be required due to: • Atypical muscle tone • Loss of limbs (dysmelia/lower limb amputation) • Limb defect and / or deformity • Joint contractures • Joint defects • General weakness The BINGO Evolution rehab pushchair is able to be used indoor and outdoor as well as for further service. For further service the product has to be cleaned and sanitised efficiently. Afterwards the product has to be checked concerning condition, wearout and damage by an authorised technician. All damaged and inapropptiate parts need to be changed. Please see also the service manual for detailled information. 3.3 2.3 Declaration of Conformity HOGGI GmbH as manufacturer declares under sole responsibility that the rehab-pushchair for kids and adolescents BINGO Evolution meets the general safety and performance requirements to Annex I of the Regulation (EU) 2017/745 of the European Parliament and of the Council. Harmonised European Standards have been applied. Applicable harmonized standards hav e been applied. BINGO Evolution meets the requirements of ISO 7176-8, DIN EN ISO 12182 and DIN EN ISO 12183. 3.4 Terms of Warranty Warranty applies only when the product is used according to the specified conditions and for the intended purposes, following all manufacturer’s recommendations.The manufacturer is not responsible for damages caused by components and spare parts not approved by the manufacturer. See also § 8 of terms and conditions on: www.hoggi.de 13 3.5 Customer service Our customer service will be happy to answer any technical questions you may have. Please refer to the last page for contact addresses and telephone numbers. 3.6 Service and repairs Service and repairs on the BINGO Evolution rehab pushchair may only be carried out by your specialist dealer. In case of problems, contact your responsible specialist dealer. In case of repairs, you will only receive original spare parts there. Spare parts and replacement units are available during the entire service life of the product, but only for a maximum of 2 years after the sale of the last product in this series. The wheelchair is custom made for the first time user. Therefore, no replacement wheelchair is available in the initial configuration. In order to ensure a correct spare parts delivery the serial no. of your wheelchair is required. We are happy to help you find a dealer near you. You can reach us at: [email protected] 3.7 Packing and shipping instructions If BINGO Evolution has to be sent back to the manufacturer for repair or exchange the product must be thoroughly cleaned/disinfected beforehand and put in a hygienically safe condition. Packaging is done by wrapping the product in a clean film, ideally with air cushions and the subsequent use of a sufficiently large cardboard box, so that no transport damage can occur. 14 4 Safety instructions 4.1 Meaning of symbols Caution! Warning of possible danger of accident and injury. Warning of possible technical damage. Information! About use of product. Information! For service-personnel. Attention! Read manual before use! 4.2 Common safety instructions For all maintenance and repair work, you should generally observe a few points: Attention! Familiarize yourself with the functions of the product. If you are not familiar with the product, study the user manual before testing. If no user mauals are available, request them from us. You can also download documents from our homepage at: www.hoggi.de Attention! Study the service and maintenance instructions before starting work. Attention! Use suitable tools (see page 4 ff.). Attention! Wear suitable clothing and, if necessary, gloves and protective goggles. Attention! Secure the product from tipping over or falling down, e.g. from the workbench. Attention! Clean / disinfect the product before starting the test. If necessary, observe the instructions in the user manual and product-specific test instructions. Note! Screws and nuts with thread locking are used for a large number of screw connections. If you have to open such screw connections, replace the respective nut or screw with one with new thread locking. If new nuts or bolts with thread locking are not available, use liquid thread locking compound with medium strength (e.g. Loctite 241 or Euro Lock A24.20). 15 5 Required tools and maintenance schedule 5.1 Required tools The following list shows the tools and utilities required for service. Reversible ratchet and sockets size 8-24 Torque wrench Measuring ranges 5-50 Nm Wrench Size 6 - 24 Hexagon wrench Gr. 3 - 6 Screwdriver Blade width 2.5 3.5 and 5.5 Phillips screwdriver Size 2 Plastic hammer Hammer approx. 300 g Carpet knife with sickle and standard blade Side cutter Liquid thread locking „medium strength“ Riveting pliers for rivets up to 5 mm 16 5.2 Maintenance schedule Pos. Customer: ............................................... BINGO Evolution Mobility base Check (Checklist to tick off ) Area Serial number: 1.) Function / Setting (siehe Bedienungsanleitung) ....................................... 2.) none damage / deformation 3.) Screw connections o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o Mobility base 1.1 Front frame (Variants) 1.2 Front struts 1.3 Rear frame 1.4 Brake with rear axle - Parking brake 1.5 Push bar - Folding mechanism o o - Suspension - Locking - Angle adjustment of the push handle 1.6 Seat bearing 1.7 Front wheels, rigid - Tires - Air pressure - Running behavior of the wheels - Quick release 1.8 Front wheels, steerable additional - Swiveling the wheel forks Rear wheels - Tires - Air pressure - Running behavior of the wheels - Quick release o o o o Accessories 1.9 Accessories bag - Fold with 1.10 Braking system - Brakes 1.11 Tie down kit 1.12 Swivel lock o o - Locking device o o - Straight run Do the settings on the base frame meet the user‘s requirements? o o o o o o o o o Notes: The maintenance was performed by: .............................................................. on: ...................................... 17 5.2 Maintenance schedule Pos. Seat unit Check (Checklist to tick off ) Area Serial number: ....................................... Customer: ............................................... BINGO Evolution 1.) Function / Setting (siehe Bedienungsanleitung) 2.) none damage / deformation 3.) Screw connections o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o Seat unit 2.1 Seat base - Seat angle adjustment - Seat lock 2.2 Seat - Seat depth adjustment 2.3 Thigh support - Seat width adjustment Hip support - Seat width adjustment - Depth adjustment hip supports - Remove 2.4 Lateral support - Fold / Remove 2.5 Back base - Recline 2.6 Back insertion - Back height adjustment 2.7 all upholstery parts 2.7 Footrest hanger 90° - Snap-in mechanism 90° Footrest hanger 90°-160° - Angle adjustment Footrest - Height adjustment 2.8 - Angle adjustment -Locking (optional) o o o o o o o o o o o o o o o o o o Accessories 2.9 Headrest pads - Width adjustment 2.10 Thorax support - Width & height adjustment 2.11 Belt fixings: Lap belt, five-point harness, foot belts, ankle huger, groin strap, fixation jacket, chest-shoulder pad - Closures o o o 2.12 Pelvic bracket (accessories) - Locking of the toothed belts o 2.13 Abduction block (accessories) 2.14 Grab rail (accessories) - Locking (tripod springs) 2.15 Therapy tray (accessories) - Locking (tripod springs) o o o o o o - Angle adjustment - Depth adjustment 2.16 Canopies (accessories) - Angle adjustment of canopy - Plug connection to the adapter Do the seat unit settings meet the user‘s requirements? o Notes: The maintenance was performed by: .............................................................. on: ...................................... 18 6. Seat settings 6.1 Seat height & lower leg length The front seat height is approx. 47 cm with the seat in a straight position. Adjustable lower leg lengths vary depending on size. Size mini: 16 - 34 cm Size 1: 16 - 37 cm Size 2: 16 - 40 cm Size 2XL: 16 - 40 cm However, with the adapter shown, the seat height can be increased by 10 cm. Lower leg lenght BINGO Evolution can basically be equipped with 2 different footrest hanger. Shown here is the footrest hanger 90° The footrest hanger can be swiveled up via the tension catches, but not fixed in place. Footrest hanger angle adjustable Adjustable between 85° and 170° via clamping lever. Minimum LLL 19 cm Standard for BINGO Evolution mini The height adjustment of the footrest is done by loosening the wing nuts on the back. Thereupon, the respective footrest mounted on the carrier, can be adjusted to the individual needs. 19 6.2 Footrest angle The footrest angle is preset to 90°. The adjustment range is +- 10° (80° - 100°). After loosening the four marked screw connections on the footrest holder the footrest can be adjusted in depth. This changes the anchor point of the footrest and thus also the footrest angle. The further the footrest is pulled out to the front, the the greater the angle. If the procedure is reversed the angle decreases accordingly. 6.3 Seat width The seat width of the BINGO Evolution can be adjusted by moving the the thigh - or the hip supports. The following adjustment ranges result for the four sizes: Size mini: Size 1: Size 2: Size 2XL: 13 - 25 cm 18 - 30 cm 23 - 35 cm 23 - 35 cm The pad is secured to the seat panel by a screw connection. The desired seat widths can be achieved by shifting in 2 slotted holes. In addition, the depth positioning can be adjusted. Wing nut screws on the underside of the seat plate secure the connection. An additionally attached nut serves as protection against loss and should always be mounted. 20 6.4 Seat depth Bingo Evolution offers an enormous ability to grow with the seat depth. The following adjustment ranges result for the four sizes: Size mini: 12 - 27 cm Size 1: 16 - 34 cm Size 2: 22 - 40 cm Size 2XL: 30 - 45 cm Measuring point front edge of seat panel to back tube In order to adjust the seat depth, a total of 4 screw connections must be loosened. For this purpose, it is advisable to either separate the seat unit from the chassis or at least to unlock it in order to have all screw connections clearly visible. First, the front screws are loosened. The seat unit is then unlocked and the rear screws can be loosened. The seat panel can now be adjusted to the desired depth position. Finally, tighten all screw connections again! 6.5 Back height Depending on the size, BINGO Evolution offers different adjustable back heights. 37 - 51 cm 45 - 63 cm 54 - 75 cm 62 - 83 cm Size mini: Size 1: Size 2: Size 2XL: From back height >75 cm we recommend the long push bar top! 21 By opening the indicated wing nut screws, the upper back section can be pulled out or pushed in opposite the base. This applies to size 1, 2 and 2 XL Back height low Back telescoped From a backrest height of 66 cm, the backrest bar must be set to the lower position for stability reasons. For size mini, telescoping is triggered by a knurled nut. 6.6 Width thorax Optional thorax pelotte pads can be used to generate lateral upper body support. The pads can be adapted precisely to the to the user. They are adjustable in width, height and angle. 22 By loosening the indicated wing nut, the distance between both pads and also the height can be adjusted. The minimum and maximum adjustable distance for the sizes: Size mini: 10-20 cm Size 1 12-22 cm Size 2 and 2XL 17-27 cm 6.7 Width headrests BINGO Evolution can be equipped with the standard headrests, as well as with a low form Low form: Provides a total adjustment range of 2 cm by sliding in 1 cm slotted holes in the pad support. Distance between supports: Size mini: 12-14 cm Size 1: 14-16 cm Size 2 and 2XL: 18-20 cm Standard: In addition to the adjustment range in the beam, offers an additional adjustment possibility by gluing in 3x1 cm wide foam inserts per side. Adjustment range of the slotted holes in the pad support. 3 foam inserts with self-adhesive film. If the inserts are glued to the inside of the pad support, the distance between the sides is reduced by 1 cm. This means that with a maximum of 6 inserts, the area can be additionally reduced by a total of 6 cm. This results in for: Size mini: 8-16 cm Size 1: 8-16 cm Size 2 and 2XL: 13-21 cm 23 6.8 Seat angle adjustment The seat angle of the BINGO Evolution can be adjusted between 0° and 45° in 12 positions of 3.5° each. With the help of the adjustment lever on the back can be adjusted desired seating position. 6.9 Recline Depending on the size, the back angle of BINGO Evolution can be adjusted between 80° and 180° in 10 positions. Size mini: 80° - 180° Size 1 90° - 160° Size 2 90° - 160° Size 2XL: 90° - 135° With the help of the rotary knob on the back, the desired seat position can be set. For size mini, the mechanism is operated by a release cableinstead of the knob. 24 7. Maintenance schedule 7.1 Chassis Steering wheel frame - Check for general damage, bending - Check of the screw connections to the rear axle, rear frame and front strut Rigid frame - Check for general damage, bending - Check of the screw connections to the rear axle, rear frame and front strut Steering wheel frame for respiratory equipment - Check for general damage, bending - Check of the screw connections to the rear axle, rear frame and front strut FrameTrike - Check for general damage, bending - Check of the screw connections to the rear axle, rear frame and front strut Frame mini - Überprüfung auf allgemeine Beschädigungen, Verbiegungen - Check of the screw connections to the rear axle, rear frame and front strut 25 Frame Cross - Check for general damage, bending - Check of the screw connections to the rear axle, rear frame and front strut 7.2 Front strut - Check for general damage, breakage of the spring - Adjustment of the spring strength - Suspension - Check of the bolting to the frame and to the rear frame joint - Check of the bolting to the front frame, to the rear frame joint and seat bearing plate 7.3 Rear frame - Check for general damage - Check of the screw connection to the rear frame joint - Check of the screw connection to the joint bandage - Check of the screw connection to the axle tube connector 7.4 Rear axle - Check for general damage - Brake function of the parking brake - Brake rod bearing and brake pedal retention - Check of the screw connections to the booster plate and to the connector 26 7.5 Push bar - Check for general damage - Folding in via the release button - Angle adjustment of the upper part of the push bar via the ratchet joints - Latching of the push bail in unfolded state - Locking of the push bar in the unfolded state, bolt must release from the lock when folded and lock in the rear frame joint when unfolded. Check of the screw connections: - Lower screw connection of the lower part of the push bar through the push bar joint to the rear frame join - Fastening of the release button - Rivet connection of the ratchet joint 7.6 Seat bearing - Check for general damage - Insertion of the seat unit in the channel bearing - Function of the release - Seat tilt, locking of the bolts in the tilt skids Check of the screw connections: - Screwing of the edge runners to the seat bearing plate and side panel. - Fastening of the release button - Riveted connection of the channel bearing - Front and rear bolting to the frame 27 7.7 Front wheels rigid - Check for general damage - Check of the tread or profile (cracks, heavy wear) - impurities - Check of the air pressure of pneumatic tires swiveling - Plastic or aluminum steering fork - Swiveling of the wheel forks - Fluttering of the wheels (steering fork damping installed?) - Check for general damage - Check of the tread or profile (cracks, heavy wear) - impurities - Check of the air pressure of pneumatic tires - Camber of the wheel worn too much Check of the bolted connections: - Screw connection of the wheel axle - Bolting of the steering fork axle to the frame Make sure that the steering fork is set up as follows! The sealing washer with the O-ring prevents excessive „fluttering“ of the steering forks. The screw must be tightened accordingly with 40 Nm! 28 7.8 Rear wheels - Air or PU tires - Check for general damage (storage) - Running behavior of the wheels - Check of the treads and the ludt pressure (if pneumatic tires) - Check of the quick lock 7.9 Accessory bag - 3 kg loadable - Check for general damage - Fastening points ok - Can the bag be folded without problems 7.10 Braking system BINGO Evolution can be equipped with 3 brake variants! Parking brake: - Basic configuration - Not in combination with drum brake wheels - Easily replaceable - Locking when locked? - Pivoting Brake for attendant - Check for general damage - Check of the brake levers - Check of the Bowden cable - Check of the screw connection of the brake levers to the push bar - Build-up of the brake pressure (readjustment of the adjusting screw) 29 Wheel with aluminum brake disc - Check of the holes (knocked out, broken bars) - Impurities Drum brake - Check for general damage - Check of the brake levers - Check of the red locking lever - Check of the Bowden cable - Check of the screw connection of the brake levers to the push bar - Build-up of the brake pressure (readjustment of the adjusting screw) - Contamination of the brake shoes Check of the drum brake wheel 7.11 Tie down kit - Check for general damage (deformation, sharp edges). edges) - Check of the screw connections to the frame and to the edge skid 30 7.12 Swivel lock - Check for general damage - Check of the latch - Check of the straight run 7.13 Seat base - Check for general damage - Check of seat angle adjustment - Check of seat lock - Check of the screw connection to the cross strut 7.14 Seating surface - Check for general damage - Check of the seat depth adjustment - Check of the screw connections from the seat panel to the seat frame - If present, inspection of riveted connections or attached brackets for straps 7.15 Thigh supports - Check for general damage - Depth and width adjustment of the pad support - Check of the screw connections to the seat panel 31 7.16 Hip supports - Check for general damage - Depth and width adjustment of the pad support - Check of the screw connections to the seat panel - Removing the hip support 7.17 Lateral supports - Check for general damage - Folding of the pads - Removal via click connection 7.18 Back base Back base Size 1/2/2XL - Check for general damage - Recline - Check of the screw connection to the seat base Back base mini - Check for general damageg - Recline - Check of the screw connection to the seat base 32 Back base BINGBO Evolution OT - Check for general damageg - Recline - Check of the screw connection to the seat base Back base BINGO Evolution OT Plus - Check for general damageg - Recline - Check of the screw connection to the seat base 7.19 Back insert Size 1/2/2XL - Check for general damage - Damage to the edge protection - Height adjustment / telescoping - Removal of the slide-in unit - Check of the screw connection for height adjustment Back insert mini - Check for general damage - Damage to the edge protection - Height adjustment / telescoping - Removal of the slide-in unit - Check of the screw connection for height adjustment Back insert OT - Check for general damage - Height adjustment / telescoping - Removal of the slide-in unit - Check of the screw connection for height adjustment 33 7.20 Individual upholstery system - Check for general damage or impurities - Wear of the upholstered surfaces 7.21 Footrest hanger Footrest hanger fixed Functional test: - Check for general damage - Latching mechanism 90 - Distance to seat panel - Screw connection to seat frame Footrest hanger angle adjustable Functional test: - Check for general damage - Swivel mechanism - Clamping lever for angle adjustment - Screw connection to seat frame 7.22 Footrest holder Standard Functional test: - Height adjustment - Check for general damage - Swivel mechanism of the screwed footrest - Correct adjustment of the foot angle - Sliding of the holder on the tubes With interlock Functional test: - Height adjustment - Check for general damage - Swivel mechanism of the screwed footrest - Correct adjustment of the foot angle - Sliding of the holder on the tubes - Locking bolt pull with locking latches, tension of the rope 34 Check of the screw connections: - Screw connection to the footrest with correct angle adjustment - Screws for lower leg length adjustment - Screwing of the swivel mechanism 7.23 Footrests Footrest standard with heel edge Functional test: - Check for general damage - Screw connection to the footrest support Footrest in boat form Functional test: - Check for general damage - Screw connection to the footrest support 7.24 Headrest pads Standard - Check for general damage (Velcro fastening, seams, holes or strapped-through areas) - Check for impurities - Insertion pad - Function of the width adjustment via the pad support 35 Low version: - Check for general damage (Velcro fastening, seams, holes or strapped-through areas) - Check for impurities - Insertion pad - Function of the width adjustment via the pad support 7.25 Thorax pads - Check for general damage - Height and angle adjustment via wing nut on the rear side - Angle adjustment of the pelotte carrier from the front 7.26 Belt fixations Lap belt Functional test: - Check for general damage - Check of the fastener - Check of the screw connection of the bracket 4-point lap belt Functional test: - Check for general damage - Check of the fastener - Check of the screw connection of the bracket Ankle huger Functional test: - Check for general damage - Check of the fastener - Check of the screw connection of the bracket to the footrest 36 Five-point harness Functional test: - Check for general damage - Check of the fastener - Check of the screw connection of the brackets Groin strap Functional test: - Check for general damage - Check of the fastener - Check of the screw connection of the brackets Fixation jacket Functional test: - Check for general damage - Check of the fastener - Check of the screw connection of the brackets - Function of the buckles on the back panel - Rivet connection of the clamping buckles Chest-shoulder harness Functional test: - Check for general damage - Check of the fastener - Check of the screw connection of the brackets - Function of the buckles on the back panel - Rivet connection of the clamping buckles 7.27 Abduction block Functional test: - Check for general damage - Pivoting and latching mechanism - Removal Check of the screw connections: - Bracket abduction block to the seat panel 37 7.28 Grab rail Functional test: - Check for general damage - Damage to the cover - Check of the tripod springs and the anchoring in the retainer for accessories 7.29 Therapy tray Standard Functional test: - Check for general damage - Damage of angle adjustment and depth adjustment - Check of the tripod springs and the anchoring in the retainer for accessories Height adjustable Functional test: - Check for general damage - Damage of angle adjustment and depth adjustment - Height adjustment - Check of the tripod springs and the anchoring in the retainer for accessories 7.30 Retainer for accessories Necessary for use of therapy tray or grab rail - Check for general damage - Screw connection of the bracket to the seat base 7.31 Winter warmer Functional test: - Check for general damage - Zipper intact - Damage to the real fur insert if present 38 7.32 Canopy Functional test: - Check for general damage - Folding and unfolding of the canopy - Removal via canopy adapter - Checking the screw connections of the adapter to the back bar or to the back panel on BINGO Evolution mini 39 8. BINGO Evolution operating life: The expected operating life of the BINGO Evolution is 5 years, depending on the intensity of use, care as well as maintenance. We recommend an annual inspection by the authorized specialist dealer. In case of malfunctions or defects of the wheelchair, it must be immediately handed over to the medical supply store or the specialist dealer. 9. Speficications Mini Size 1 Seat width 130 - 250 mm 180 - 300 mm Seat depth 120 - 270 mm 160 - 340 mm Tilt of seat unit Seat unit in driving direction Seat unit against driving direction 45° 45° 45° 45° Back height 370 - 510 mm 450 - 630 mm Recline Seat unit in driving direction Seat unit against driving direction 80° - 180° 80° - 180° 90° - 160° 90° - 160° Lower leg length 160 - 340 mm 160 - 370 mm 290 x 60 mm 300 x 60 mm 290 x 60 mm 300 x 60 mm 190 x 50 mm 200 x 48 mm 190 x 50 mm 200 x 48 mm User weight Maximum load* Seat unit Mobility base 25 kg 60 kg 50 kg 60 kg Weight** Seat unit Mobility base 6,4 kg 8,6 kg 6,4 kg 8,6 kg Total length Maximum Minimum 1015 mm 910 mm 1015 mm 910 mm Total width Maximum Minimum 630 mm 620 mm 630 mm 620 mm Height 1110 mm 1110 mm Weight of the heaviest part (seat unit) 8,6 kg 8,6 kg Rear wheel diameter Steering wheel diameter CAUTION! *Accessories and add-on parts reduce the remaining load capacity for the occupant. CAUTION! **The weight specifications refer to a BINGO Evolution in basic equipment. 40 9. Speficications Size 2 Size 2 XL Seat width 230 - 350 mm 230 - 350 mm Seat depth 220 - 400 mm 300 - 450 mm Tilt of seat unit Seat unit in driving direction Seat unit against driving direction 45° 45° 45° 45° Back height 540 - 750 mm 620 - 830 mm Recline Seat unit in driving direction Seat unit against driving direction 90° - 160° 90° - 160° 90° - 135° 90° - 135° Lower leg length 160 - 400 mm 160 - 400 mm 290 x 60 mm 300 x 60 mm 290 x 60 mm 300 x 60 mm 190 x 50 mm 200 x 48 mm 190 x 50 mm 200 x 48 mm User weight Maximum load* Seat unit Mobility base 50 kg 60 kg 50 kg 60 kg Weight** Seat unit Mobility base 7,4 kg 8,7 kg 7,4 kg 8,7 kg Total length Maximum Minimum 1015 mm 910 mm 1015 mm 910 mm Total width Maximum Minimum 680 mm 670 mm 680 mm 670 mm Rear wheel diameter Steering wheel diameter Height 1110 mm 1110 mm Weight of the heaviest part (seat unit) 8,7 kg 8,7 kg 41 Eulerstraße 27 • 56235 Ransbach-Baumbach • Deutschland Fon: (+49) 2623 / 92 499-0 E-mail: [email protected] • www.hoggi.de © by HOGGI GmbH_1910-2006-EN_04_2024 HOGGI GmbH ">

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Adjustable seat and back
- Robust chassis
- Safety features
- Indoor and outdoor use
- Customizable
- Grows with the user
- Various accessories
Frequently asked questions
The maximum load capacity of the Hoggi BINGO Evolution Cross is 60 kg, as indicated in the manual.
The label is located on the inside of the left side strut and under the seat panel.
Yes, the seat depth can be adjusted by loosening four screw connections and adjusting the seat panel to the desired position. Remember to tighten all screw connections afterward.