IPORT CONNECT PRO BaseStation Owner's Manual

The iPort CONNECT PRO BaseStation is a secure and versatile charging station designed to power and protect your IPORT CONNECT Case. With its secure mounting options, you can easily attach the BaseStation to a table or desk, while the built-in locking mechanism ensures the safety of your device. The BaseStation offers various charging options including DC power and PoE (Power over Ethernet) for a flexible setup.

PDF Download

Document

CONNECT
PRO
BASESTATION
72352 - BaseStation - Black
72353 - BaseStation - White
1
CONNECT
PRO
BASESTATION
IPORT CONNECT PRO BaseStation Install
Manual
Thank you for purchasing the all new IPORT
CONNECT Platform. We hope you enjoy this revolutionary new system and if at any time you need
more assistance please contact IPORT Tech Support via Online chat or through our help desk online.
- IPORT Team
Whats in box:
1 - IPORT CONNECT BaseStation
1 - IPORT Power Supply - 25V 1.5A DC. 2.1 mm x 5.5 mm
connector.
4 - Mounting Screws
1 - IPORT Security Tool
1 - Info Card
Product Info Page - www.iportproducts.com/cpbase
Glossary of Terms:
• BaseStation - The main mounting station on a solid surface where the IPORT CONNECT Case mounts and charges.
• Security Weight - The bottom removable portion of the BaseStation which can be secured to a table or desk.
• BaseStaion Cable Housing - The removable plastic DC
cover.
• Cable Retention Clip - The small metal clip on the bottom of the BaseStation used to hold
the DC or Cat 5 Cable in place.
• BaseStation Security Lock - The small round lock on the back of the BaseStation used to actuate the lock to secure the Case to the BaseStation.
2
CONNECT
PRO
BASESTATION
Using the Provided DC Power Adapter
1.Remove BaseStation and Power Supply from the box and place on a table.
2. Insert the DC barrel plug into the bottom of the BaseStation.
3
CONNECT
PRO
BASESTATION
3. Rotate the Cable retention clip over the DC cable.
4
CONNECT
PRO
BASESTATION
4. Plug in the IPORT DC Power Adapter
into the wall.
5. Place the BaseStation in the desired location and attach the IPORT CONNECT PRO Case onto the BaseStation to charge in portrait or landscape.
5
CONNECT
PRO
BASESTATION
Upgrading the BaseStation to PoE
1. Remove PoE+ Upgrade from the box
and place on a table.
2. Insert the IPORT Security Tool into the small holes in the back of the BaseStation foot. Rotate the tool counterclockwise until it stops. Repeat for the second hole.
6
CONNECT
PRO
BASESTATION
3. Tilt the BaseStation forward to allow
the BaseStation weight to come out of the bottom of the BaseStation.
Use caution as the BaseStation weight is
very heavy.
7
CONNECT
PRO
BASESTATION
4. Disconnect the DC Barrel cable if installed and pop out the BaseStation Cable Housing cover.
8
CONNECT
PRO
BASESTATION
5. Remove the DC Barrel cable from the BaseStation Cable Housing and disconnect the cable from the IPORT DC Adapter.
9
CONNECT
PRO
BASESTATION
6. Attach the IPORT CONNECT PoE+ Upgrade Adapter to the IPORT DC Adapter as shown:
10
CONNECT
PRO
BASESTATION
7. Run a Cat 5 Cable through the cable
housing and attach to the PoE + Splitter.
11
CONNECT
PRO
BASESTATION
7. Run the Cat 5 cable in the Cable Retention Channel and rotate the Cable Retention clip over the Cat 5 Cable.
12
CONNECT
PRO
BASESTATION
8. Reassemble the BaseStation back
onto the BaseStation Weight and tighten
the Security Screws rotating clockwise.
9. Connect the other end of the Cat 5 Cable to a PoE+ Switch or an IPORT PoE Injector 72106 (sold separate).
13
CONNECT
PRO
BASESTATION
BaseStation Security Features Securing the Base to a Table.
1. Remove BaseStation from the box and place on a table.
2. Insert the IPORT Security Tool into the small holes in the back of the BaseStation foot. Rotate the tool counterclockwise until it stops. Repeat for the second hole.
14
CONNECT
PRO
BASESTATION
3. Tilt the BaseStation forward to allow
the BaseStation Weight to come out
of the bottom of the BaseStation.
Use Caution as the BaseStation Weight is
very heavy.
15
CONNECT
PRO
BASESTATION
4. Place the BaseStation Weight in the desired location for securing the BaseStation. Use a pencil to mark the four mounting locations. Make sure the rectangle notch is facing where the back of the BaseStation will be positioned.
5. Remove the BaseStation Weight and drill a pilot hole in the center of the marked locations.
16
CONNECT
PRO
BASESTATION
6. Use the four provided screws to secure the BaseStation Weight to the
desired surface.
17
CONNECT
PRO
BASESTATION
7. Reinstall the BaseStation by hooking the front of the BaseStation foot the to front of the BaseStation weight and then placing
the back of the BaseStation down on
the weight.
18
CONNECT
PRO
BASESTATION
8. Insert the IPORT Security Tool into the small holes in the back of the BaseStation foot. Rotate the tool Clockwise until it stops. Repeat for the second hole.
19
CONNECT
PRO
BASESTATION
BaseStation Security Features Securing the Case to the BaseStation.
1. Place the Case onto the BaseStation in the final orientation desired (Portrait or Landscape) NOTE the case can not be rotated once it is locked in place.
20
CONNECT
PRO
BASESTATION
2. To lock the Case to the BaseStation, insert the IPORT Security tool into the back of the BaseStation and rotate the tool clockwise with the red indicator facing the Lock icon.
21
CONNECT
PRO
BASESTATION
2. To unlock the Case from the BaseStation, insert the IPORT Security tool into the back of the BaseStation and rotate the tool counterclockwise with the red indicator facing the Unlock icon.
22
">

Hello! I am an AI chatbot specifically trained to assist you with the CONNECT PRO BaseStation Owner's Manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts