IPORT CONNECT PRO PoE+ Adapter Owner's Manual

The iPort CONNECT PRO PoE+ Adapter is a device that allows you to power and connect your iPad to a Surface Mount System. It features a built-in PoE+ injector, which provides power to the device over an Ethernet cable. The adapter also includes a USB-C to molex cable, which connects the iPad to the Surface Mount installation.

PDF Download

Document

CONNECT
PRO
1
2
Use a Cat 5 or Cat 6 cable terminated
with an RJ-45 connector to connect the
IPORT PoE+ Adapter (72102).
Connect the other end of the Cat 5 or
Cat 6 to a PoE+ Switch or PoE+ Injector.
Use the IPORT USB-C to molex cable
provided in the Surface Mount Systems
(70752, 70754, 70755, 70756, 70808, 70806)
and connect into the molex jack of the
PoE+ Adapter.
Connect the USB-C cable into the iPad
and complete the Surface Mount Install.
For more information on installing the
Surface Mount please reference the
instruciton included with the Surface
Mount Systems.
CONNECT
PRO
PoE+
Switch
PoE+
Injector
IPORT USB-C to
proprietary cable
IPORT USB-C to
proprietary cable
PoE+
Adapter
PoE+
Adapter
(72102)
(72102)
IPORT Surface Mount
IPORT Surface Mount
70752, 70754
70755, 70756
70808, 70806
70752, 70754
70755, 70756
70808, 70806
PoE+ Switch
25.5W IEEE 802.3at
PoE+
Injector
(72106)
">

Hello! I am an AI chatbot specifically trained to assist you with the CONNECT PRO PoE+ Adapter Owner's Manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant terminated