CONNECT
MOUNT
VESA MOUNT
72393 - CONNECT VESA Mount - Black
1
CONNECT
MOUNT
VESA MOUNT
IPORT CONNECT VESA Mount
Install Manual
Thank you for purchasing the all new IPORT
CONNECT PRO VESA Station. We hope you enjoy
this revolutionary new system and if at any time
you need more assistance please contact IPORT
Tech Support via Online chart or through our help
desk.
Whats in box:
1 - IPORT CONNECT VESA Station
1 - IPORT Security tool - 1.5mm hex key
1 - M4 x 10mm screws
1 - Info Card
Product Info Page - https://www.iportproducts.com/
Product/72305
Power Handling
• 9-30V DC 1.5A from a 2-wire connection
• 48VPoE+ when the IPORT PoE+ Upgrade (72109) is installed.
Glossary of Terms:
• VESA STATION - The fully assembled CONNECT PRO VESA Station consisting of the Station,
Cover and screws.
• Station Cover - The thin plastic cover arround the round charging portion of the VESA Station.
• IPORT Security Tool - The orange handled 1.5mm hex
tool used for locking and unlocking IPORT Products.
2
CONNECT
MOUNT
VESA MOUNT
1. The IPORT CONNECT VESA Station is
desigend to conform to MIS-D standard
and will work with most 75 mm x 75mm
and 100mm x 100mm VESA mounts.
2. The IPORT CONNECT VESA Station
Ships with provided 10mm screws however depending on your VESA mount or
stant you may need to source seperate
lenghts 4M screws.
3
CONNECT
MOUNT
VESA MOUNT
3. Remove the 4ea M4x10mm Screws
from the back of the VESA Station.
X4
4
CONNECT
MOUNT
VESA MOUNT
4. Install the Screws through the appropriate holes for your mount and screw into the back of the VESA Mount.
5
CONNECT
MOUNT
VESA MOUNT
4. Remove the ruber plug from the
bottom of the VESA Mount and set aside
for later.
6
CONNECT
MOUNT
VESA MOUNT
4. Insert the USB-C to Molex Cable
thorugh the hole in the bottom of the
VESA Station.
7
CONNECT
MOUNT
VESA MOUNT
4. Place the rubber grommit over the
USB-C cable making sure to positoin the
hooking end of the grommit away from
the USB-C connector.
8
CONNECT
MOUNT
VESA MOUNT
4. Insert the rubber grommit with the
hook first then pressing the grommit in
all the way to secure it in place.
9
CONNECT
MOUNT
VESA MOUNT
10
CONNECT
MOUNT
VESA MOUNT
11
CONNECT
MOUNT
VESA MOUNT
13. Insert the CONNECT mounting bracket into the CONNECT CASE making sure the bracket snaps into place securely.
12
CONNECT
MOUNT
VESA MOUNT
14. Place the Case onto the MOUNT in the desired portrait or landscape orientation. Feed the IPORT Molex cable though the center of the mounting bracket.
13
CONNECT
MOUNT
VESA MOUNT
15. Use the provided 4 machine screws to attach the Mounting Bracket to the CONNECT Mount Bracket.
x4
16. Plug the molex connector from the Mount into the cable on the CONNECT CASE. Note the gold pins
are facing outward when connecting into the Mount cable. Press the Mount cable into the channel to hold and secure the cable
out of the way of the iPad.
14
CONNECT
MOUNT
VESA MOUNT
17. Insert the iPad into the attached Case and install the top onto the Case.
15
CONNECT
MOUNT
VESA MOUNT
18. Use the provided IPORT Security tool to lock the Case top onto the Case securing the iPad.
COMPLETE
16
">
