IPORT CONNECT PRO Rugged Case 9 gen Owner's Manual
PDF
Download
Document
Advertisement
Advertisement
CONNECT PRO RUGGED CASE 72305 - CONNECT PRO Rugged Case 10.2 - Black 1 CONNECT PRO RUGGED CASE IPORT CONNECT PRO RUGGED Case Install Manual Thank you for purchasing the all new IPORT CONNECT PRO Rugged Case. We hope you enjoy this revolutionary new system and if at any time you need more assistance please contact IPORT Tech Support via Online chart or through our help desk. Whats in box: 1 - IPORT CONNECT RUGGED Case 1 - IPORT Security tool - 1.5mm hex key 1 - HandStrap 1 - Info Card Product Info Page - https://www.iportproducts.com/ Product/72305 Glossary of Terms: • Case - The fully assembled CONNECT PRO Case. • Case Top - The short removable portion of the chase including the locking portion of the Case. • IPORT Security Tool - The orange handled 1.5mm hex tool used for locking and unlocking IPORT Products. • Station Interface Module - The main electronics portion of the new IPORT CONNECT Platform consisting of the round electronic components. • Dock Interface Module - The secondary linear electronics found on the IPORT CONNECT Case. 2 CONNECT PRO RUGGED CASE 1. Remove Case from the box and place on a table. 2. Remove the short Case Top. 3 CONNECT PRO RUGGED CASE 3. Slide iPad into the Case making sure the lighting cable is snugly inserted into the iPad. 4 CONNECT PRO RUGGED CASE 4. Reinstall the Case top onto the lower half if the Case and iPad. 5 CONNECT PRO RUGGED CASE 5. Use the provided IPORT tool, insert the tool into the top of the case and slide the tool towards the lock position icon. 6 CONNECT PRO RUGGED CASE • For added security rotate the IPORT tool clockwise to tighten the setscrew in place holding the lock secure. 7 CONNECT PRO RUGGED CASE 6. Place the IPORT CONNECT Pro RUGGED Case onto a BaseStation WallStation or Multi-dock for charing. 8 ">

Public link updated
The public link to your chat has been updated.
Advertisement