XPR MTPADP-RS-EH Owner's Manual

MTPADP-RS-EH
EM & HID KEYPAD AND RFID
READER WITH RS-485 OUTPUT
This double technology reader offers a double access security: via code and via card. It can be installed either outside or inside. It comes with a RS-485 bus and a backlight
keypad. Its LEDs, tamper and buzzer are managed directly
by the WS4 controllers. It can read EM or HID 125 kHz cards,
depending on the programming selected.
FEATURES
- Surface mount
- ABS housing
- Colour: Black or silver
- Technology: Keypad + RFID
- Reader type: EM 4002/4100 or HID (125 kHz)
- Read range: up to 5 cm
- RS-485 output
- Backlit keys
- Green and red LED, managed by the host *
- 1 internal buzzer (ON/OFF), managed by the host
- Tamper protection: when opened or dismantled
- Push buttons: 1
- Voltage: 9 - 14 V DC
- Current Consumption: 30 mA stand-by;
100 mA maximum.
Backlit keypad
The MTPADP-RS-EH is equipped with an orange backlight
that can be easily disabled if necessary with My WS4.
The keypad changes its backlight color when the code
or card is presented.
MECHANICAL CARACTERISTICS
- IP rating: IP 65
- Operating temperature: -20°C to +50°C
- Operating humidity: 5% to 95% RH without condensation
- Weight: ~0.17 kg
DIMENSIONS & COLOURS
Green backlight
Access granted
51 mm
Orange backlight
Iddle mode
Red backlight
Access denied
92 mm
MTPADPBK-RS-EH
Black - ABS
27 mm
MTPADPS-RS-EH
Silver - ABS
FOBS & CARDS
EM
Fobs & Cards
Ref.
Features
PBX-1E
PBX-1C
PBX-2
PBX-2C
ABS Keyfob
EM4100
Leather Keyfob
EM4100
0.75mm ISO
Card - EM4100
2mm NISO
Card - EM4100
All product specifications are subject to change without notice.
* Compatible only with our
WS4 controllers
MTPADP-RS-EH_DS_EN_Ve2
www.xprgroup.com
">