Paderno Vortex Blade High-Speed Digital Blender, BPA-Free, Black Stainless Steel Owner's Manual

User Manual
HIGH-SPEED BLENDER
Model No. BLE017
Product No. 043-5262-4
1
Product No. 043-5262-4
The PadernoTM High-Speed Blender
powerfully blends, purees, chops and
crushes ingredients for a variety of
recipes. Manually control the speed
using the dynamic dial, or select one
of the 4 pre-sets for easy operation.
Quickly and easily create healthy
smoothies, creamy soups, smooth nut
butters, crushed ice, and much more.
2
1-800-263-9768
paderno.com
Table of
Contents
IMPORTANT SAFETY INSTRUCTIONS
Technical Information
Using Your Blender
Cleaning and Maintenance
Our Guarantee
4
6
8
12
13
3
Product No. 043-5262-4
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions
should always be followed including the following:
1.
2.
3.
Read all instructions before using. Save
these instructions for future reference.
To protect against the risk of
electrical shock, DO NOT immerse
the cord, plug or Blender Base in
water or other liquid.
Close supervision is necessary
when an appliance is used by or
near children.
4.
Ensure that the rating of the
appliance corresponds to that of
your electrical installation.
5.
Turn the appliance OFF, then
unplug from the outlet when
not in use, before assembling or
disassembling parts and before
cleaning. To unplug, grasp the plug
and pull from the outlet. Never pull
from the power cord.
6.
Flashing light indicates that the
appliance is ready to operate. Avoid
any contact with the blades and
movable parts.
7.
DO NOT use appliance for other
than its intended use.
8.
DO NOT operate any appliance
with a damaged cord or plug or
after the appliance malfunctions,
or is dropped or damaged in any
manner. The appliance should
not be repaired or opened by an
unlicensed person. Refer to the
“Our Guarantee” section regarding
the product’s warranty before
returning the appliance to the point
of purchase.
4
9.
DO NOT use outdoors.
10. DO NOT let cord hang over edge
of table or counter or touch hot
surfaces, including the stove.
11. DO NOT place the appliance on or
near a hot gas or electric stovetop
burner or in a heated oven.
12. Keep hands and utensils, other
than the Tamper provided, out of
the Blender Jar while blending to
reduce the risk of severe injury to
persons or damage to the blender.
The Lid must remain in place when
using the Tamper through the lid
opening. A scraper may be used
but only when the blender is not
running.
13. Blades are sharp. Handle carefully.
14. To reduce the risk of injury, never
place the Blade Assembly on the
Blender Base without the Blender
Jar attached.
15. Always operate blender with the Lid
in place.
16. The use of attachments, including
canning jars, not recommended by
the manufacturer may cause a risk
of injury to persons.
17. DO NOT process hot food and
liquids.
18. This appliance is not intended for
use by persons (including children)
with reduced physical, sensory
or mental capabilities, or lack of
experience and knowledge, unless
1-800-263-9768
paderno.com
they have been given supervision
or instruction concerning use of the
appliance by a person responsible
for their safety.
19. Children should not play with
the appliance.
20. Care shall be taken when handling
the sharp cutting blades, emptying
the Blender Jar and during
cleaning.
21. This appliance shall not be used by
children. Keep the appliance and its
cord out of reach of children.
SAVE THESE
INSTRUCTIONS
THIS PRODUCT
IS INTENDED FOR
HOUSEHOLD USE
ONLY
5
Product No. 043-5262-4
Technical Information
Peak Horse Power
The Paderno™ High-Speed Blender has
a peak horsepower of 1.5, which is the
peak horsepower output of the motor,
and does not reflect the operational
horsepower of the blender. Peak
horsepower is measured in laboratory
testing. During actual use, the blender
will operate at a lower rating than the
peak horsepower.
Polarized plug
This appliance has a polarized plug
(one blade is wider than the other). To
reduce the risk of electric shock, the
plug will fit in a polarized outlet only
one way. If the plug does not fully fit the
outlet, reverse the plug and reinsert. If
it still does not fit, contact a qualified
electrician.
DO NOT modify the plug in any way.
6
1-800-263-9768
paderno.com
Measuring Cap
Tamper
Lid
Blender Jar
(1.5 L maximum
capacity)
Blade and
Blade Assembly
Start/Pause Button
Power Button
Pulse Button
Digital Display Screen
Dynamic Control Dial
Blender Base
Rubber Feet
7
Product No. 043-5262-4
Using Your Blender
Effortlessly blend, chop, puree and crush with your
PadernoTM High-Speed Blender.
Before First Use
Refer to the Cleaning & Maintenance
section of this manual. Clean the
appliance and attachments thoroughly
before first use.
CAUTION:
1.
2.
To protect against risk of electrical
shock, DO NOT put the Blender
Base in water or other liquid.
The blades are very sharp. The
blade assembly is not removable.
HOW TO USE
1.
Before assembling the blender,
ensure it is unplugged from the
power supply.
2.
Place Blender Base on a flat, dry
surface such as a kitchen counter.
3.
Attach the Blender Jar upright on
the Blender Base. The handle of the
Blender Jar can be positioned to any
corner of the appliance.
4.
Add ingredients to Blender Jar as
directed by your recipe, ensuring
not to exceed the “MAX“ mark.
5.
Place the Lid firmly into position on
the top of the Blender Jar.
6.
Close the Lid and insert the
Measuring Cap into the Lid and
turn in either direction to lock into
position. You can use the Measuring
Cap to add ingredients while the
blender is running. Close the filler
8
hole immediately after, to avoid
splashing. Caution! NEVER operate
the blender empty. DO NOT blend
hot liquids.
7.
Insert the power plug into a 120V
power supply outlet.
8.
Press the Power Button. The LED
light will illuminate and Digital
Display Screen will be visible.
9.
Pre-set Functions
a) There are 4 pre-set functions
including Smoothie, Crushed Ice,
Soup and the Self-Cleaning Cycle.
The digital display screen shows the
corresponding icon when each preset is selected (as shown in Fig. 9a).
Fig. 9a
Smoothie: For making blended
drinks
Crushed Ice: Pulsing action crushes
cubes of ice
Soup: Purees, blends and heats
soup
Self-Cleaning Cycle: Run this cycle
with half a jar of water and a couple
1-800-263-9768
cubes of ice to quickly rinse the
jar and blade. For a more thorough
clean, run the cycle with half a jar
of water and a couple drops of
soap. Rinse the jar and blade under
running water.
b) Turn Dynamic Control Dial left
or right until the symbol for your
desired pre-set appears on the
Digital Display Screen and then click
the dial to select the pre-set. The
pre-set can be reset by clicking and
holding the Dial for 1 second.
c) Press the Start/Pause Button,
shown in Fig. 9c, to
begin blending.
d) During blending,
press the Start/Pause
Button to pause the
Fig. 9c
blending to add
ingredients or use the Tamper to
push ingredients onto the blade.
Press the Start/Pause Button again
to continue blending.
e) During blending, turn the dial to
increase or decrease the time, if
necessary.
f) When the timer reaches “0:00”
the blending will stop and the
blender will enter “Standby” mode.
CAUTION: Keep hands and utensils
out of the Blender Jar while
blending to prevent the possibility
of severe injury to persons or
damage to the unit. A scraper may
be used but only when the unit is
not in use.
paderno.com
10. Manual Program
a) Select the Manual program and
click the Dynamic Control Dial,
shown in Fig. 10a.
b) The default
speed is the
minimum speed
setting. There are
Fig. 10a
10 speed settings,
from 1 (minimum
speed) to 10
(maximum speed).
Adjust the speed
setting by turning
Fig. 10b
the Dynamic
Control Dial and click the dial to
select the setting, shown in Fig. 10b.
The speed can be adjusted at any
time, even during blending.
c) Press the Start/Pause Button to
begin blending. Once blending
has begun, the timer will count
up from 0:00 while the blender
is in operation. The blender will
automatically stop after 2 minutes.
To continue blending, press the
Start/Pause Button.
d) To pause the blending, click the
Start/Pause Button,
shown in Fig. 10d. Ensure
blending is paused while
adding ingredients or
pushing the ingredients
Fig. 10d
down with the Tamper.
e) To stop the blender manually,
press the Start/Pause Button, or click
and hold the Dial for 2 seconds, or
press the Power Button.
9
Product No. 043-5262-4
11. Pulse Button
Ideal for processing foods that need
sudden bursts of power, for a short
period of time. Press and hold the
Pulse Button to process food. When
the button is released, the blender
will return to the previous setting.
The Pulse function can be used at
any time when the power is on. The
maximum operating time for the
Pulse function is 1 minute.
12. Overload Protection System
The blender has an overload
protection system to prevent
damage to the motor. If the blender
is overheated, the blender will
stop and “Cooling” will appear on
the screen. The cooling timer will
count down from 20 minutes (1200
seconds). The Start/Pause Button
cannot be activated during cooling.
After the blender has cooled,
unplug it to reset, and then the
blender can be used again.
13. Sleep Mode
Sleep Mode is activated if no action
is taken for 2 minutes. The Dynamic
Control Dial and Digital Display
Screen will turn off. Press any
button, turn the dial or click the dial
to illuminate the screen.
10
Blending Guidelines
•
Add ingredients to Blender Jar a
little at a time to ensure proper
blending and prevent overflow.
•
Do not fill the Blender Jar above the
MAX line. The action of the Blade
will cause the ingredients to rise in
the Blender Jar. For large quantities,
make in several batches.
•
Unless the recipe states differently,
pour liquid ingredients into Blender
Jar before solid ingredients. The
liquid will help the processing go
faster and at a lower speed.
•
Do not remove the Blender Jar from
the Blender Base when the motor
is running. Keep hands and utensils
out of Blender Jar while processing
to prevent the possibility of severe
personal injury and/or damage to
the blender.
•
Thick mixtures require special
attention during processing.
Periodically pause the blending to
scrape the mixture off the sides of
the Blender Jar and onto the Blade.
Select a higher speed setting if
processing becomes sluggish.
•
With the Measuring Cap removed,
add solids and ice a little at a time
through the hole in the Lid.
•
Always cut solid foods, such as
vegetables and cheeses, into
small chunks before placing in the
Blender Jar.
1-800-263-9768
paderno.com
Blender Ingredients
For best results, add ingredients into
the Blender Jar in the order shown in
the illustration below.
Ice and
Frozen Ingredients
Fruits and
Vegetables
Leafy Greens
Dry Ingredients
Liquid
11
Product No. 043-5262-4
Cleaning and Maintenance
Note: Blender Jar, Lid, Tamper and
Measuring Cap are dishwasher safe.
Self-Cleaning Pre-set Function
1.
Fill the Blender Jar halfway with
water.
2.
Add a few ice cubes or a couple
drops of soap to the water.
3.
Select and start the Self-Cleaning
Pre-set.
4.
Thoroughly rinse the jar to remove
all soap.
Quick Cleaning of the
Blender Jar and Blade
1.
Pour warm water into the Blender
Jar.
2.
Add a few drops of soap.
3.
Mix water and detergent by
pressing the Pulse button.
4.
Thoroughly rinse the jar to remove
all soap.
Thorough Cleaning of the
Blender Jar and Blade
Note: The Blade Assembly is
not removable.
Caution! Handle with care. The blades
are very sharp.
1.
Remove the Lid and Measuring Cap.
2.
Rinse the Blade Assembly with
water and soap.
12
3.
Wash the Lid, Measuring Cap and
Blender Jar in the dishwasher for
thorough cleaning.
Cleaning the Blender Base and
User Interface
Warning! Never immerse the Blender
Base or power cord in water or any
other liquid.
1.
Turn the blender off and unplug the
power cord.
2.
Clean by wiping the Blender Base,
user interface and power cord with
a damp cloth.
3.
Dry immediately by wiping with a
dry, soft cloth.
4.
Re-coil the power cord in the cord
storage area in the bottom of the
Blender Base.
Note: Always correctly assemble clean
blender parts before storing on the
blender base. Severe injury can result if
blender is accidentally turned on when
not properly assembled.
Disposal of Appliance
DO NOT dispose of this product in
household waste. Many parts of this
product are recyclable. Dispose of
as per the requirements of your local
municipality.
1-800-263-9768
paderno.com
Our Guarantee
If you experience any issues with your PadernoTM HighSpeed Blender, please refer to the warranty terms below to
determine the corrective course of action.
2-Year Limited Warranty
Padinox Inc. (“Paderno”) has been fuelling
your passion for cooking since 1979. This
iconic Canadian brand gives you outstanding
durability and performance, so you can
concentrate on the important things, like
what to make next.
That’s why we stand by all our products!
Starting from the date of purchase, Paderno
warrants that your Kitchen Appliance is free
from any manufacturing defects in materials
or workmanship for a period of 2 years.
This warranty is only offered on Paderno
appliances sold and used in Canada. The
Paderno warranty covers all costs related
to restoring the proven defective product
through the repair or replacement of any
defective part and necessary labour so that
it conforms to its original specifications.
A replacement product may be provided
instead of repairing a defective product at
Paderno’s discretion.
The Paderno warranty does not apply
to appliances that have been used
commercially or in non-household
applications. The warranty does not cover
damages resulting from misuse or abuse of
the product and/or uses inconsistent with
this Use and Care manual, attempts at repair,
theft, use with unauthorized attachments
or failure to follow the instructions provided
with the product. This warranty becomes
void if attempts at repair are made by
non-authorized third parties and/or if
spare parts, other than those provided by
Paderno, are used. You may also arrange
for service after the warranty expires at an
additional cost. There are no other express
warranties except as set forth herein
and any applicable implied warranties
of merchantability and fitness (or those
provided for by law) are limited in duration
to the period of coverage of this express
written limited warranty.
CONTACT:
If you have any trouble with the product
during the warranty period, please visit us
online at www.Paderno.com or contact us
at: 1-800-263-9768 or via email
[email protected]
Padinox Inc. Toronto Canada M4P 2V8
A receipt indicating the purchase date is
required for any claims, so please keep
it in a safe place. We recommend that
you register your product on our website
https://www.paderno.com/pages/productregistration
Although greatly appreciated, the product
registration is not required to activate any
warranty and product registration does not
eliminate the need for the original proof of
purchase.
13
Product No. 043-5262-4
14
1-800-263-9768
MAN845P003-00000
paderno.com
15
Cook. For life.
Valued by professional chefs and passionate
home cooks alike, PADERNOTM offers an
exceptional level of durability and
performance guaranteed.
Connect with us at paderno.com to learn more
and register your product.
For questions and concerns, please contact:
[email protected]
1-800-263-9768
16
">