Paderno Vortex Blade Power Digital Blender, BPA-Free, Black Stainless Steel Owner's Manual
Paderno Vortex Blade Power Digital Blender, BPA-Free, Black Stainless Steel is a powerful kitchen appliance that allows you to blend, puree, chop and crush ingredients for a variety of recipes. It features a dynamic dial for manual speed control and 4 presets for easy operation. Quickly and easily create healthy smoothies, creamy soups, smooth nut butters, crushed ice, and more.
PDF
Download
Document
Advertisement
Advertisement
User Manual POWER BLENDER Model No. BLE-008 Product No. 043-5260-8 1 Product No. 043-5260-8 The PadernoTM Power Blender powerfully blends, purees, chops and crushes ingredients for a variety of recipes. Manually control the speed using the dynamic dial, or select one of the 4 presets for easy operation. Quickly and easily create healthy smoothies, creamy soups, smooth nut butters, crushed ice, and much more. 2 1-800-263-9768 paderno.com Table of Contents IMPORTANT SAFETY INSTRUCTIONS Technical Information Using Your Blender Cleaning and Maintenance Our Guarantee 4 6 8 12 13 3 Product No. 043-5260-8 IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic safety precautions should always be followed including the following: 1. Read all instructions before using. Save these instructions for future reference. 2. To protect against the risk of electrical shock, DO NOT immerse the cord, plug or Blender Base in water or other liquid. 3. Close supervision is necessary when an appliance is used by or near children. 4. Ensure that the rating of the appliance corresponds to that of your electrical installation. 5. Turn the appliance OFF, then unplug from the outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord. 6. Flashing light indicates that the appliance is ready to operate. Avoid any contact with the blades and movable parts. 7. DO NOT use appliance for other than its intended use. 8. DO NOT operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. The appliance should not be repaired or opened by an unlicensed person. Refer to the “Our Guarantee” section regarding the product’s warranty before returning the appliance to the point of purchase. 9. 4 DO NOT use outdoors. 10. DO NOT let cord hang over edge of table or counter or touch hot surfaces, including the stove. 11. DO NOT place the appliance on or near a hot gas or electric stovetop burner or in a heated oven. 12. Keep hands and utensils, other than the Tamper provided, out of the Blender Jar while blending to reduce the risk of severe injury to persons or damage to the blender. The Lid must remain in place when using the Tamper through the lid opening. A scraper may be used but only when the blender is not running. 13. Blades are sharp. Handle carefully. 14. To reduce the risk of injury, never place the Blade Assembly on the Blender Base without the Blender Jar attached. 15. Always operate blender with the Lid in place. 16. The use of attachments, including canning jars, not recommended by the manufacturer may cause a risk of injury to persons. 17. DO NOT process hot food and liquids. 18. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. 1-800-263-9768 paderno.com 19. Children should not play with the appliance. 20. Care shall be taken when handling the sharp cutting blades, emptying the Blender Jar and during cleaning. 21. This appliance shall not be used by children. Keep the appliance and its cord out of reach of children. SAVE THESE INSTRUCTIONS THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY 5 Product No. 043-5260-8 Technical Information Peak Horse Power The Paderno™ Power Blender has a peak horsepower of 2.2, which is the peak horsepower output of the motor, and does not reflect the operational horsepower of the blender. Peak horsepower is measured in laboratory testing. During actual use, the blender will operate at a lower rating than the peak horsepower. Polarized plug This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, the plug will fit in a polarized outlet only one way. If the plug does not fully fit the outlet, reverse the plug and reinsert. If it still does not fit, contact a qualified electrician. DO NOT modify the plug in any way. 6 1-800-263-9768 paderno.com Measuring Cap Tamper Lid Blender Jar (2 L maximum capacity) Blade and Blade Assembly Start/Pause Button Power Button Pulse Button Digital Display Screen Dynamic Control Dial Blender Base Rubber Feet 7 Product No. 043-5260-8 Using Your Blender Effortlessly blend, chop, puree and crush with your PadernoTM Power Blender. Before First Use Refer to the Cleaning & Maintenance section of this manual. Clean the appliance and attachments thoroughly before first use. CAUTION: 1. 2. To protect against risk of electrical shock, DO NOT put the Blender Base in water or other liquid. The blades are very sharp. The blade assembly is not removable. HOW TO USE 1. Before assembling the blender, ensure it is unplugged from the power supply. 2. Place Blender Base on a flat, dry surface such as a kitchen counter. 3. Attach the Blender Jar upright on the Blender Base. The handle of the Blender Jar can be positioned to any corner of the appliance. 4. Add ingredients to Blender Jar as directed by your recipe, ensuring not to exceed the “MAX“ mark. 5. Place the Lid firmly into position on the top of the Blender Jar. 6. Close the Lid and insert the Measuring Cap into the Lid and turn in either direction to lock into position. You can use the measuring cup to add ingredients while the blender is running. Close the filler 8 hole immediately after, to avoid splashing. Caution! NEVER operate the blender empty. DO NOT blend hot liquids. 7. Insert the power plug into a 120V power supply outlet. 8. Press the Power Button. The LED light will illuminate and Digital Display Screen will be visible. 9. Pre-set Functions a) There are 4 pre-set functions including Smoothie, Crushed Ice, Soup and the SelfCleaning Cycle. The digital display screen shows the corresponding icon when each preset is selected (as shown in Fig. 9a). Smoothie: For making blended drinks Crushed Ice: Pulsing action crushes cubes of ice Soup: Purees, blends and heats soup Fig. 9a Self-Cleaning Cycle: Run this cycle with half a jar of water and a couple cubes of ice to quickly rinse the jar and blade. For a more thorough clean, run the 1-800-263-9768 cycle with half a jar of water and a couple drops of soap. Rinse the jar and blade under running water. b) Turn Dynamic Control Dial left or right until the symbol for your desired pre-set appears on the Digital Display Screen and then click the dial to select the pre-set. Then select the Level (1, 2 or 3) to determine the blending time. The pre-set can be reset by clicking and holding the Dial for 1 second. c) Press the Start/Pause Button, shown in Fig. 9c, to begin blending. d) During blending, press the Start/ Pause Button to pause the blending to add ingredients or use the Tamper to push ingredients onto the blade. Press the Start/ Pause Button again to Fig. 9c continue blending. e) During blending, turn the dial to increase or decrease the time, if necessary. f) When the timer reaches “0:00” the blending will stop and the blender will enter “Standby” mode. CAUTION: Keep hands and utensils out of the Blender Jar while blending to prevent the possibility of severe injury to persons or damage to the unit. A scraper may be used but only when the unit is not in use. paderno.com 10. Manual Program a) Select the Manual program and click the Dynamic Control Dial, shown in Fig. 10a. b) The default Fig. 10a speed is the minimum speed setting. There are 10 speed settings, from 1 (minimum speed) to 10 (maximum speed). Adjust the speed setting by turning the Dynamic Control Dial and click the dial to select the setting, shown in Fig. 10b. The speed can be Fig. 10b adjusted at any time, even during blending. c) Press the Start/Pause Button to begin blending. Once blending has begun, the timer will count up from 0:00 while the blender is in operation. The blender will automatically stop after 2 minutes. To continue blending, press the Start/Pause Button. d) To pause the blending, click the Start/Pause Button, shown in Fig. 10d. Ensure blending is paused while adding ingredients or pushing the ingredients Fig. 10d down with the Tamper. e) To stop the blender manually, press the Start/Pause Button, or click and hold the Dial for 2 seconds, or press the Power Button. 9 Product No. 043-5260-8 11. Pulse Button Ideal for processing foods that need sudden bursts of power, for a short period of time. Press and hold the Pulse Button to process food. When the button is released, the blender will return to the previous setting. The Pulse function can be used at any time when the power is on. The maximum operating time for the Pulse function is 1 minute. 12. Overload Protection System The blender has an overload protection system to prevent damage to the motor. If the blender is overheated, the blender will stop and “Cooling” will appear on the screen. The cooling timer will count down from 20 minutes (1200 seconds). The Start/Pause Button cannot be activated during cooling. After the blender has cooled, unplug it to reset, and then the blender can be used again. 13. Sleep Mode Sleep Mode is activated if no action is taken for 2 minutes. The Dynamic Control Dial and Digital Display Screen will turn off. Press any button, turn the dial or click the dial to illuminate the screen. 10 Blending Guidelines • Add ingredients to Blender Jar a little at a time to ensure proper blending and prevent overflow. • Never fill the Blender Jar more than 3/4 full. The action of the Blade will cause the ingredients to rise in the Blender Jar. For large quantities, make in several batches. • Unless the recipe states differently, pour liquid ingredients into Blender Jar before solid ingredients. The liquid will help the processing go faster and at a lower speed. • Do not remove the Blender Jar from the Blender Base when the motor is running. Keep hands and utensils out of Blender Jar while processing to prevent the possibility of severe personal injury and/or damage to the blender. • Thick mixtures require special attention during processing. Periodically pause the blending to scrape the mixture off the sides of the Blender Jar and onto the Blade. Select a higher speed setting if processing becomes sluggish. • With the Measuring Cap removed, add solids and ice a little at a time through the hole in the Lid. • Always cut solid foods, such as vegetables and cheeses, into small chunks before placing in the Blender Jar. 1-800-263-9768 paderno.com Blender Ingredients For best results, add ingredients into the Blender Jar in the order shown in the illustration below. Ice and Frozen Ingredients Fruits and Vegetables Leafy Greens Dry Ingredients Liquid 11 Product No. 043-5260-8 Cleaning and Maintenance Note: Blender Jar, Lid, Tamper and Measuring Cap are dishwasher safe. Self-Cleaning Pre-set Function 1. Fill the Blender Jar halfway with water. 2. Add a few ice cubes or a couple drops of soap to the water. 3. Select and start the Self-Cleaning Pre-set. 4. Thoroughly rinse the jar to remove all soap. Quick Cleaning of the Blender Jar and Blade 1. Pour warm water into the Blender Jar. 2. Add a few drops of dish detergent. 3. Mix water and detergent by pressing the PULSE button. 4. Thoroughly rinse the jar to remove all soap. Thorough Cleaning of the Blender Jar and Blade Note: The Blade Assembly is not removable. Caution! Handle with care. The blades are very sharp. 1. Remove the Lid and Measuring Cap. 2. Rinse the Blade Assembly with water and dish detergent. 12 3. Wash the Lid, Measuring Cap and Blender Jar in the dishwasher for thorough cleaning. Cleaning the Blender Base and User Interface Warning! Never immerse the Blender Base or power cord in water or any other liquid. 1. Turn the blender off and unplug the power cord. 2. Clean by wiping the Blender Base, user interface and power cord with a damp cloth. 3. Dry immediately by wiping with a dry, soft cloth. 4. Re-coil the power cord in the cord storage area in the bottom of the Blender Base. Note: Always correctly assemble clean blender parts before storing on the blender base. Severe injury can result if blender is accidentally turned on when not properly assembled. Disposal of Appliance DO NOT dispose of this product in household waste. Many parts of this product are recyclable. Dispose of as per the requirements of your local municipality. 1-800-263-9768 paderno.com Our Guarantee If you experience any issues with your PadernoTM Power Blender, please refer to the warranty terms below to determine the corrective course of action. 2-Year Limited Warranty Padinox Inc. (“Paderno”) has been fuelling your passion for cooking since 1979. This iconic Canadian brand gives you outstanding durability and performance, so you can concentrate on the important things, like what to make next. That’s why we stand by all our products! Starting from the date of purchase, Paderno warrants that your Kitchen Appliance is free from any manufacturing defects in materials or workmanship for a period of 2 years. This warranty is only offered on Paderno appliances sold and used in Canada. The Paderno warranty covers all costs related to restoring the proven defective product through the repair or replacement of any defective part and necessary labour so that it conforms to its original specifications. A replacement product may be provided instead of repairing a defective product at Paderno’s discretion. The Paderno warranty does not apply to appliances that have been used commercially or in non-household applications. The warranty does not cover damages resulting from misuse or abuse of the product and/or uses inconsistent with this Use and Care manual, attempts at repair, theft, use with unauthorized attachments or failure to follow the instructions provided with the product. This warranty becomes void if attempts at repair are made by non-authorized third parties and/or if spare parts, other than those provided by Paderno, are used. You may also arrange for service after the warranty expires at an additional cost. There are no other express warranties except as set forth herein and any applicable implied warranties of merchantability and fitness (or those provided for by law) are limited in duration to the period of coverage of this express written limited warranty. CONTACT: If you have any trouble with the product during the warranty period, please visit us online at www.Paderno.com or contact us at: 1-800-263-9768 or via email [email protected] Padinox Inc. Toronto Canada M4P 2V8 A receipt indicating the purchase date is required for any claims, so please keep it in a safe place. We recommend that you register your product on our website https://www.paderno.com/pages/productregistration Although greatly appreciated, the product registration is not required to activate any warranty and product registration does not eliminate the need for the original proof of purchase. 13 Product No. 043-5260-8 14 1-800-263-9768 MAN845P001-00000 paderno.com 15 Cook. For life. Valued by professional chefs and passionate home cooks alike, PADERNOTM offers an exceptional level of durability and performance guaranteed. Connect with us at paderno.com to learn more and register your product. For questions and concerns, please contact: [email protected] 1-800-263-9768 16 ">
Advertisement
Key features
- 2.2 peak horsepower
- 4 presets
- Digital display screen
- Dynamic Control Dial
- Pulse Button
- Self-cleaning cycle
- Overload protection system
- BPA-Free
- Black Stainless Steel
Frequently asked questions
To use the pre-set functions, first select the desired pre-set using the Dynamic Control Dial and click the dial to confirm. Then, choose the blend level (1, 2, or 3) to determine blending time. Press the Start/Pause button to begin blending. You can pause during blending to add ingredients or use the Tamper.
The blender has an overload protection system that prevents damage to the motor. If the blender overheats, it will stop, and “Cooling” will appear on the screen. The cooling timer will count down from 20 minutes (1200 seconds). The Start/Pause Button cannot be activated during cooling. After the blender has cooled, unplug it to reset, and then it can be used again.
The Blender Jar, Lid, Tamper, and Measuring Cap are dishwasher safe. To use the Self-Cleaning Pre-set, fill the Blender Jar halfway with water and add a few ice cubes or drops of soap. Select and start the Self-Cleaning Pre-set. Then, thoroughly rinse the jar to remove all soap.