PiXORD PB670(E) User Manual

H.264 Series Fish-Eye Compact
Network Camera
PB670 / PB670E
User’s Manual
Rev. 1.03
Released Date: 07/05/2012
Table of Contents
Revision History ................................................................................................................... 2
Notices ................................................................................................................................. 3
Introduction .......................................................................................................................... 5
Installation............................................................................................................................ 6
Using the Web UI ............................................................................................................... 14
1. Live View ................................................................................................................ 15
2. Video ...................................................................................................................... 18
General ................................................................................................................ 18
Advanced ............................................................................................................ 20
3. Camera ................................................................................................................... 21
General ................................................................................................................ 21
4. Event ................................................................................................................... 28
Event Server ........................................................................................................ 29
Motion Detection.................................................................................................. 31
I/O Ports .............................................................................................................. 33
Event Configuration ............................................................................................. 34
5. Schedule ................................................................................................................. 35
General ................................................................................................................ 35
Storage ................................................................................................................ 36
6. Network .................................................................................................................. 38
General ................................................................................................................ 38
Advanced ............................................................................................................ 39
SMTP (E-Mail) ..................................................................................................... 40
DDNS .................................................................................................................. 41
7. System .................................................................................................................... 42
Information........................................................................................................... 42
User ..................................................................................................................... 43
Date & Time ......................................................................................................... 44
Server Maintenance ............................................................................................ 45
Log Service.......................................................................................................... 46
8. Customize ............................................................................................................... 47
FAQ.................................................................................................................................... 49
I/O Terminal Connector - Pin Assignment ................................................................... 49
Restore Factory Default .............................................................................................. 50
Upgrade device firmware ............................................................................................ 51
1
Revision History
Version
Description
Author
1.01
Original document
Anthony
1.02
Modify the GPIO picture
Eric_Y
1.03
Change Wall 720P Mount
SamKao
2
Notices
This user manual is intended for administrators and users of the PB670 Series Network Camera, including
instructions for using and managing the camera on your network. The use of surveillance devices may be
prohibited by law in your country. It is the user’s responsibility to ensure that the operation of such devices is
legal before installing this unit for its intended use.
Before the Network Camera is installed, all the safety and operating instructions should be carefully read and
followed to avoid damage due to faulty assembly and installation. This also ensures the product is used
properly as intended.
Heed all warnings

Do not drop or strike this equipment
Sensitive electronics inside the camera are vulnerable to excessive strike.

Do not install the equipment near any flames or heat sources
Excessive heat could damage this equipment.

Do not cover cloth or to install this equipment in poorly ventilated places.
Overheating could damage this equipment.

Do not expose this equipment to rain or moisture. Do not touch the power connection with
wet hands
Risk of short circuit, electric shock or fire.

Do not damage the power cord or leave it under pressure
Risk of fire or shock circuit.

To reduce the risk of electric shock, do not remove the Cover (or Back).
No user-serviceable parts inside. Misusage, improper, and negligence could damage this
equipment. Need to refer servicing to qualified service personnel.

Do not continue to operate if there appears to be fault.
If the unit ceases to function, contact qualified service personnel for help.

All work related to the installation of this product should be made by qualified service
personnel or system installers.
3
Liability
PiXORD Corporation reserves the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without
notice. Customers should obtain the latest relevant information before placing orders and should verify that
such information is current and complete. All products are sold subject to PiXORD Corporation’s terms and
conditions of sale supplied at the time of order acknowledgment.
PiXORD is not responsible or liable for the resale of its products with statements different from or beyond the
specification/parameters stated by PiXORD. Customers are responsible for their applications using PiXORD
products. To minimize the risks associated with customer applications, customers should provide adequate
operating safeguards. PiXORD is under no obligation to provide any further technical support service or
product/software alteration beyond PiXORD's representation.
PiXORD products are not authorized for use in safety-critical applications where a failure of the PiXORD
product would cause severe personal injury or death, unless officers of the parties have executed an
agreement specifically governing such use.
Reproduction of PiXORD information or datasheets with alteration is an unfair and deceptive business
practice. PiXORD is not responsible or liable for any such statements.
Every care has been taken of this manual. If there are any inaccuracies or omissions, please inform your local
office. PiXORD Corporation cannot be held responsible for any typographical or technical errors. PiXORD
Corporation is not liable or responsible for incidental or damages caused by mishandling.
Trademarks
All names used in this manual for hardware and software are probably registered trademarks of respective
companies. PiXORD is a registered trademark of PiXORD Corporation. All rights reserved.
Support
If you require any technical assistance, please contact your PiXORD reseller. You can connect to the Internet
PiXORD’s website: www.pixord.com for below information,

Download user documentation and update firmware at PiXORD Support
( http://www.pixord.com/support/support.asp)

Find answers to resolved problems in the FAQ database. Or contact our FAE at technical support
(http://www.pixord.com/contact2.asp)
4
Introduction
PB670 is a Fish-Eye Network Camera; it is featured with superior H.264-AVC performance and rich functions.
Fish-Eye Camera includes a fish-eye lens for 360° wide angle view without blind spot. Thus Fish-Eye Camera
is very suitable to view a wide area with single camera such as hallway, store, office, and etc.
The H.264-AVC video compression enables to lower bandwidth and storage requirements without
compromising image quality; motion JPEG is supported for increased flexibility, as well as multiple
independent video streaming.
The hardware based on the processing ability of panorama video can provide user modes of multiple video,
including source image, double broad view, triple mode view and quad view. And it supports wall mount,
ceiling mount, and wall mount 720P.
The e-PTZ function including preset point without moving parts, can replace part of traditional PTZ camera
and thus save lots of cost for maintaining traditional mechanical Pan/Tilt.
The camera offers optional PoE type for installation. The PoE (IEEE802.03af) feature provides an easy
installation through a single Ethernet cable, which lessens the installation of power plugs or extensions.
Further functions include two-way audio and micro SD card for local storage application.
5
Installation
1. Hardware Connection
1. Prepare a PC with Ethernet link to the network
2. Connect LAN port (RJ45) of the camera to a network switch/hub
3. Connect power jack / POE ; POE support only for PB670E
4. Ensure the power adaptor specification matching the power system (110V or 220V) and connect the
adaptor to the outlet
5. Check LED status (Power/Network)
6
2. Software Installation
The following software is necessary for the proper display and use of the Fish-eye camera from the Web
site. The software will be taken from the Software CD.
IP Installer
The IP Installer is used to locate and configure network cameras and video servers on the LAN. This
utility is useful for conveniently configuring and finding the network settings of the device.
Install the IP Installer from the software CD. Click the IP installer to launch the program.
XVID Codec
An H.264 codec is applied for displaying the video stream and playing the recoded AVI files. If the video
stream can’t be displayed, or the recorded AVI files, or played on PC, install the XVID Codec from the
software CD.
VLC
VLC can be used for viewing the streaming without a Web browser.
7
3. Network Configuration
IP Installer is a utility that provides an easier and more efficient way to configure the IP address and
network setting of the device. It even provides a convenient way to set the network settings and use the
batch setting function simultaneously. Moreover, IP Installer can save the network settings for all
devices as a backup and restore them when necessary.
Preparation before IP Assignment
1.
Always consult your network administrator before assigning an IP address to your server in order to
avoid using a previously assigned IP address.
2.
Ensure the camera is powered on and correctly connected to the network.
3.
MAC address: Each device has a unique Ethernet address (MAC address) shown on the label of the
device as the serial number (S/N) with 12 digits (e.g. 000429-XXXXXX).
*0004290000
B1
4.
Although the IP Installer is able to find and configure any device on the LAN except those that are
behind a router, it is a good idea to set the host PC to the same subnet. In order to connect to the
web-based user interface of the camera, the host PC must be in the same subnet. For more information
about subnets, please consult your network administrator.
Using IP Installer to Assign an IP Address to PB670
1.
Once IP Installer has been successfully installed on the PC, double click the IP Installer icon on the
desktop,
2.
Click the [Device Search] to search the device in the LAN.
8
3.
From the list, select the device with the MAC address that corresponds to the camera that is to be
configured. The MAC address is identical to the S/N of unit. (S/N = Serial Number).
4.
Double click the select item to open the property page or right click the item to select the
[Single Device Setting].
5.
Modify the network settings of the camera.
9
6.
After filling in the properties, click [Set] button to complete the configuration settings.
7.
Click the [Batch Device Setting] to set several devices.
10
8.
Supported languages: Traditional Chinese, English and Spanish.
11
Open the Web-based UI of the Selected camera
1.
To access the web-based UI of the selected unit, run the View > Open web on the menu bar.
2.
For first-time use, there will be a prompt to install the ActiveX control. Confirm the installation as it is
required to view the video stream and some operations.
12
3.
If the device has been configured correctly, the default web browser will open to the home page of the
selected device.
Verify and Complete the Installation from Your Browser
When browsing the home page at the first time with the Microsoft Internet Explorer
TM
, you must temporarily
lower your security settings to perform a one-time-only installation of the ActiveX component onto your
workstation, as described below:
1.
From the Tools menu, select [Internet Options]
2.
Click the [Security] tab and then click [Custom Level] button to see your current security settings.
3.
Set the security level to Low and click [OK].
4.
Type the URL or IP address of your camera into the address field.
5.
A dialog box will pop up asking if the ActiveX control should be installed. Click [Yes] to start the
installation.
Once the ActiveX installation is complete, return the security settings to their original value, as noted above.
13
Using the Web UI
Start your web browser and enter the URL or IP address in the address field. The home page of the
camera is now displayed.
14
1. Live View
IP address of the
camera
Button
Video
format
Resolution
Frame
Rate
Description
Click this button to access general/advance camera settings.
Choose a language for the user interface.
Languages options are English, traditional Chinese and simplify Chinese.
Click this button to display different views.
Check this button to view the resolution of the image.
Click this button to manually trigger a preset event in the configuration page.
Choose a stream for viewing.
15
Bit
rate
Button
Description
Click this button to switch to full screen mode.
Click this button to listen the audio input from local end.
Click this button to talk to people around the Network Camera.
Click this button to record video clips to your computer.
Click this button to capture and save still images.
16
Configuration Pages List
Video

General

Advanced
Camera

General

Advanced
Event

Event Server

Motion Detection

I/O ports

Event Configuration
Schedule

General

Storage
Network

General

Advanced

SMTP (E-mail)

DDNS
System

Information

User

Date & Time

Server Maintenance

Log Service
Customize

Style Layout
17
2. Video
General
OSD Setting
Enable the On Screen Display (OSD) information. A line of text message (e.g. Camera Name or Position) and the
date/time string are available to be selected for displaying or hiding on the images.
The PTZ function will display in quad with source view, double with source view, double view of wall mount and wall
mount 720P, triple view of wall mount and wall mount 720P.
Click the PTZ
icon, the web will pop up the control panel to control e-PTZ function of PB670.
Double with source view PTZ control panel:
18
3
1
4
2
5
6
1. Step: Set the speed of Pan function. (1~10)
2. Pan Arrow: Click this button to control Pan.
3. Move the control panel.
4. Close the control panel.
5. Zoom: Digital zoom in/out.(1~10)
6. Preset Point: List of preset points. (1~16)
Triple & Quad with source & Double view PTZ control panel:
1
2
5
6
3
4
7
1. Ch: Select the channel. (1~4) & (2~4)
2. Step: Sets the speed of Pan/Tilt function. (1~10)
3. Pan Tilt Arrow: Click this button to control Pan/Tilt.
4. Zoom: Digital zoom in/out. (1~10)
5. Move the control panel.
6. Close the control panel.
7. Preset Point: List of preset points. (1~16)
19
Advanced
Stream 1 Setting:

RTSP Path: It is the stream ID used for RTSP client streaming connection, such as VLC player. (default
v00)

Resolution: 1600x1200, 800x600, 640x480.

Video Mode: Choose between variable bit rate (VBR) and constant bit rate (CBR)
<1>: VBR-> Choose quality level from best to standard. For some environment, it is very important to
ensure the video quality level, but the bandwidth consumption will be variable after selecting
video quality level.
<2>: CBR-> Choose target bit rate range from 1000kb to 6000kb. For some environment, it is very helpful
for network bandwidth management, but the video quality will be variable up to the
complexity of video scene.

Image Format: There are 2 kinds of format to choose; MJPEG and H.264.

GOP: Choose the number of P-frame or B-frame between I-frame from 2 to 32. The shorter of the number
Indicates the higher video quality you may get, and it will consume more network bandwidth and
storage size.

Frame Rates (FPS): Input the number of frames to display from 5 to15 per second.
20
3. Camera
General
21
Camera General Setting:
Brightness: The luminance of image view
Hue: Pure color described by its name, such as red, green or blue.
Saturation: Intensity of a specific color
The 3 correlates are referring image appearance in terms of color/vision. They are adjustable from
this page.
Rotation: Rotate the image. It apply to the ceiling mounted camera.
Audio Setting:
Enable this option, and then the video streaming will be transferred and accompanied with the
audio data.
Web Record/Snapshot Setting:
Web Record/ Snapshot: Define the location where snapshot images and video clips will be stored.
The file name is referring to the prefix of the actual file name of each snapshot image or video clip
generated.
Default:
Set [camera general setting] and [audio setting] back to default value.
Note:It doesn’t change the configuration of [Web Record Setting] and [web Snapshot Image
Setting]
Save:
Save the changes that have been made.
22
White balance: Adjust compensation for different environments in terms of light source.
Exposure: Anti-flicker setting for image sensor to fit the frequency of light (power) source. For
instance, the power frequency is 50Hz for most European countries, while 60Hz is typical for US.
This setting is therefore regionally different. Note: Default setting is 50Hz.
Max Exposure Time: Refer to the shutter speed.
Max Gain Control: The amplified factor for the incoming light.
Infrared (IR) Cut Filter: The default is automatically switched according to the light intensity.
Enable : The filter is enable to cut IR light to make sure that the color is correct.
Disable : The filter is disabled and allows the infrared (such as IR LED illuminator) to enter the
camera to execute low lux surveillance application.
Day / Night Threshold: When the lux is lower than 20, the camera will automatically change to
night mode and allow Infrared to enter the camera.
Color/Mono Mode: The default is automatically switched according to light intensity. It can also
be forced to display color image even in a low light environment.
Camera Mount: Choose mounting type of camera; wall, ceiling, and wall 720P.
Wall Mount: Choose the wall mount type, and go back to live view. There are 4 kinds of video
23
layout to choose; original view, broad view, quad with source view and triple view.
1: Original view
2: Board view
24
3: Quid with source view
4: Triple view
25
Ceiling Mount: Choose the ceiling mount, and go back to live view. There are 2 kinds of video layout to
choose; original view, and quad view.
1: Original view
2: Quad view
26
Wall 720P Mount: Choose the wall 720P mount type, and go back to Live view. There are 3 kinds of n video
layout to choose; broad view, double view, double with source view.
1: Board view
2: Double view
3: Double with source view
27
4. Event
28
Event Server
Click on the [Add FTP] to expand the FTP server setting.
FTP Server:

Name: Enter a name for the FTP setting.

Network Address: Enter the network address of the FTP server.

Upload Path: Choose the path for uploading events.

Port: Input the port number of the FTP server
Login Information:

Username / Password: Input the username and password of the FTP
29
Click on the [Add HTTP] to expand HTTP server setting.
HTTP Server:

Name: Enter a name for the HTTP setting.

URL: Enter the URL of the HTTP server.

Username / Password: Input the username and password of the HTTP.
Click [Remove] to delete selected event servers (circled in blue)
30
Motion Detection
1
1
To add a motion detection area:
1. Click [Add] to set up a detection area.
(Set up panel will be expanded)
31
2
3
4
2. Enter a name to this window area.
3. Select the trigger level and sensitivity for this detection window. (0~100, low~high)
4. Select color for detection window.
5. The draw detection window is displayed on the image.
32
6. Once everything is done, click [Save] to save the configuration made.
Configured detection window will be displayed in motion detection list. (Circled in blue)
Note:
1. Maximum number of detection window is 10.
I/O Ports
This model supports 1 photo-coupled relay inputs and 1 relay outputs, referring to “I/O Terminal
Connectors” for detail pin description and application. The tab shows the status of Input and Output ports
with external trigger/alarm devices.
33
Event Configuration
The Event Configuration is to assign the actions responding to the specified events (Trigger Conditions).
The table lists the configured events. Click “Add…” or choose an event from the list to expend the panel for
detail configurations. “Remove” is to delete a selected event.
2
1. Add an event trigger, click [Add], and setup panel will be expanded.
2. Enter a name to this event.
3. Set the time interval between each trigger.
4. Set the time period for the trigger. Choose “Always” or “During time between” or “Never”.
5. The trigger condition is Motion Detection.
The responding actions can be “Upload images”, “Activate Output Port”,
Notification”, “Send HTTP Notification to”, and “Send Message Notification (TCP)”.
6. Click [Save] to save the configuration made.
34
“Send Email
5. Schedule
General
Define the day (specified by days of a week) and time (specified by each single hour), so that the camera will
be recorded during the scheduled period. (Note: Only video data will be recorded.) User can select which
video stream to record. When the check box is ticked and the setting is saved, recording process will start.
Recording files are saved to the Micro SD storage.
35
Storage
The storage information shows disk size info, type and status. The warning message (red text) shows when
recording is on process; SD card can not be removed during the recording process.
The “Browse” button allows viewing the list of recorded files, and then the web page will be redirect to the
root path of the SD storage (if one is inserted). The list includes couple of folders, the Oevent_images which
contains all of the still images captured by any event trigger, and folders specified by date where the
recorded video files are located.
36
The recorded files are named in date_time format, and the extension file name is “.h264”. While file is in
h264 raw format, it can be played in VLC player. (Note: The recorded file only includes video, no audio
information.)
※ Noted~!! Please into the SD memory card in the slot before start the machine~!!!
37
6. Network
General
The device IP configuration includes DHCP and Static IP setting. “Enable ARP/Ping” enable device to accept
ARP or ping packets from the network. Disabling this option provides extra security from intentional ping.
38
Advanced
Enable or configure other network functions.
NTP: Configure a NTP (Network Time Protocol) server, so that the date and time of the device system can be
synchronized with a specified Time Server. This configuration is provided for one of the potions of system
date/time adjustment.
HTTP: Set the HTTP port, and apply for Web UI access.
RTSP: Set the RTSP (Video) port for video data transmission.
UPnP: Enable UPnP, so that the device can be discovered in an UPnP Compliant Network.
NAT Traversal: Enable NAT traversal, so that client from Internet can have access to the devices behind the
Router.
Note: Enable UPnP, so that the IP Sharing device (Router) is capable of UPnP function and will automatically
be noticed with the NAT port of the device.
39
SMTP (E-Mail)
Configure an email host in the device, and it will send a email on behalf of the configured email account in a
circumstance, like sending an email notice to a specified mail address (Event Configuration).
Sender: Complete the Mail Server, Server Port, Authentication information (if required) and the email
address of sender.
Receiver: The email address of the receiver.
40
DDNS
Dynamic DNS(DDNS) configuration: The network device can be assigned and accessed with a host name
instead of IP address by registering this service (Internet access required).
Host Name: Assigned name will be used for access to the device
User Name/Password: Account authentication for logging to this service
Update Time: Periodically, the device updates its access information to sever in the configured time.
Response: The device responds the connecting information.
41
7. System
Information
A list of System and Network configurations
42
User
User setting is to set up the accessing network camera for viewing and configuring the device.
Enabling anonymous login allows guest users to access the Web User interface without any authentication.
Note: For configuration settings an Administrator username and password is still required. The default
username and password is admin/admin respectively.
43
Date & Time
System date/time configuration. Options of synchronizing with PC and NTP server are provided for automatic
adjustment.
44
Server Maintenance
This page provides for system maintenance; reboot and load default settings, as well as the function of
launching upgrade process, backup/restore user settings and language defines.
45
Log Service
Most system operations and / or process will be kept in a log system. The link provides the review of these
records.
46
8. Customize
This page provides the function of adjusting the look of live view page. There are two types of layout settings;
use default look or use custom settings.
Use Default Look: The default layout of live/configuration pages
Use Defined Links: Web link(s) will be presented on the live page when enabled. It can be a link to another
IP camera for instance, or other preferred web link.
47
Use Custom Settings: The allowed modifications are change of Background / Text Color, Background
picture, Title, Description, Logo and etc.
48
FAQ
I/O Terminal Connector - Pin Assignment
Pin
Function
Description
1
DO_NO
Digital output implementation; Pin7 to COM (Pin6) is a Photo-coupled relay on
2
DO__COM
Normal Open status. External device can directly connect to the terminals.
However the current that will go through the 2 nodes must not exceed 130mA. An
external “Relay” can also be connected to the terminals as an implementation. In
this case, current (or/and voltage) limitation is specified by the external Relay.
3
DI
4
GND
5
Audio In
6
Audio Out
7
GND
Connect to GND to activate, or leave floating (or unconnected) to deactivate.
2 way Audio connectors , and connect to GND to activate
49
Restore Factory Default
Reset Button
To restore factory default, please follow the steps:
1.
Unplug the power jack to turn off the power of the camera.
2.
Insert a pin into the reset hole as circled with red in the below figures. Sense a button and keep it
pressed until instructed to release.
3.
Plug in the power jack to turn on device, and the status LED will be quick flashing after a few
minutes.
4.
Release the button (remove the pin from the reset hole). The camera should now be back to
factory default.
50
Upgrade device firmware
Firmware upgrade process should be done via the web configuration; Setup -> Server Maintenance ->
Firmware Upgrade. Before the process, read the instructions and release notes coming with each new
released version. For the steps,
1.
Check and retrieve the latest firmware bin file.
2.
Disconnect all clients (e.g. streaming requests) to the device.
3.
Stop the local (schedule) recording if it was enabled.
4.
Go to the Firmware Upgrade page, browse and locate the downloaded firmware bin file. Click the
“Upgrade” button.
5.
The upgrade should start in minutes, depending on file transferring status. The web will then be
directed to the system writing progress. Overall upgrading process takes about 5~10 minutes. In this period,
DO NOT DISCONECT the power. System of the unit can be damaged otherwise.
6.
The power LED (orange one) will be quick/slow flashing during the upgrading process. When it
becomes steady on again, the camera is ready to be accessed. Check the firmware version. If the
system is not upgraded, redo the above steps. In the case, restore factory default process may be
required.
51
">