QSAN XN8104R, XN5104R Hardware Manual

Qsan XN8104R, XN5104R is a next-generation high-efficiency NAS system designed for composite enterprise applications aimed at SMB users. Combining a 4-bay LFF design with dual M.2 slots for flash-ready architecture, it delivers server-grade performance. It's designed for a seamless experience and maximizes investment value through superior performance, high I/O flexibility, and multi-level security. The XN8104R, XN5104R supports 19-inch rack mounting in a 2U chassis.

PDF Download
Document
QSAN XN8104R, XN5104R Hardware Manual: Download & Read Online | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • 4-bay LFF + M.2 slots
  • 19-inch rack mount 2U
  • Server-grade performance
  • Flash-Ready architecture
  • High I/O flexibility
  • Multi-level security
  • Composite enterprise applications
  • SMB user focus

Frequently asked questions

Use the enclosed USB extension cable (A-male to A-female) to connect to the system's USB port located on the front pillar. First, connect the USB LCM to the female side of the cable, then connect the male side to the system's USB port.

Press and hold the reset button on the rear panel for 3 seconds. You will hear a short beep for 1 second. This will reset the administrator password to '1234', all network settings to DHCP, and all data services to default ports. It will also terminate VLANs, delete Vswitch, disable port trunking, restart the system, log out QSAN Cloud, delete DNS settings, and delete DDNS and UPNP settings.

The default baud rate is 115,200 with 8 data bits, no parity, 1 stop bit, and no flow control. The terminal type is vt100.
ALP:
Preparing document for printing…
0%