Installation Instructions
Original Instructions
PCI Riser Card
Catalog Number 6300V-PCIRISER
This publication refers to a PCI Riser card installation on an Allen-Bradley® ASEM™
6300 industrial computer.
3.
Loosen the thumb screw from the chassis of your industrial computer,
then slide the thumb screw to the to the left.
Loosen the thumb screw.
Summary of Changes
Slide the thumb screw here.
This publication contains the following new or updated information. This list
includes substantive updates only and is not intended to reflect all changes.
Topic
Page
Page reduction to two pages
4.
throughout
Addition of Prepare for Installation section to include step to prepare for
maintenance.
1
Correct the cover removal procedure to apply to all applicable ASEM 6300
industrial computer models where a PCI riser card can be installed.
1
Replace term ‘card-retaining screw’ with ‘thumb screw’.
1
ATTENTION: Read this document and the documents listed
in the Additional Resources section about installation,
configuration and operation of this equipment before you
install, configure, operate or maintain this product. Users are
required to familiarize themselves with installation and
wiring instructions in addition to requirements of all
applicable codes, laws, and standards.
Activities including installation, adjustments, putting into
service, use, assembly, disassembly, and maintenance are
required to be carried out by suitably trained personnel in
accordance with applicable code of practice. If this
equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment
may be impaired.
If an expansion card and riser is installed, proceed to
Remove the Existing Expansion Card and Riser.
Otherwise, proceed to Install the PCI Riser Card.
Remove the Existing Expansion Card and Riser
If your industrial computer has an expansion card and riser already installed,
follow the procedure below for removal.
1. From the inside of the chassis, use a screwdriver to remove the screw
from the expansion card.
Top View
2.
Remove the expansion card from the riser.
3.
Remove the two fixing screws from the riser.
4.
Remove the riser from its slot.
View from Inside of Chassis
Approximate Dimensions
Dimensions are in millimeters (inches). Dimensions are not intended for
manufacturing purposes.
Figure 1 - Cat. No. 6300V-PCIRISER
133.00
(5.24)
56.00
(2.20)
Prepare for Installation
Follow these steps to prepare for installation of the PCI riser card.
1. Complete the steps in the Prepare for Maintenance and Service section
from the user manual for your particular industrial computer model listed
in Additional Resources.
2. Complete the steps in the Remove the Cover section from the
user manual for your particular industrial computer model listed in
Additional Resources.
The slot is now available to install the PCI riser card.
Top View
Install the PCI Riser Card
Perform the steps below to install the PCI Riser Card, Cat. No. 6300V-PCIRISER.
1. Insert the PCI riser card into the available slot.
Additional Resources
These documents contain additional information concerning related products from
Rockwell Automation. You can view or download publications at
rok.auto/literature.
Resource
2.
3.
4.
Tighten the two screws on each side of the PCI riser card.
Insert the expansion card into the installed PCI riser card.
Use a screwdriver to tighten the fixing screw on the expansion card.
View from Inside of Chassis
5.
Description
6300B Book Mount Box PC and 6300T
Provides steps to install, configure, maintain, and
Book Mount Box Thin Client User Manual, use ASEM 6300B book mount box PCs.
publication 6300B-UM001
6300B Wall Mount Box PCs User Manual, Provides steps to install, configure, maintain, and
publication 6300B-UM002
use ASEM 6300B wall mount box PCs.
6300B Machine Mount Box PC User
Manual, publication 6300B-UM003
Provides steps to install, configure, maintain, and
use ASEM 6300B-MM machine mount box PCs.
6300P Panel PCs User Manual,
publication 6300P-UM001
Provides steps to install, configure, maintain, and
use ASEM 6300P Panel PCs.
Safety Guidelines for the Application,
Installation, and Maintenance of
Solid-state Control, publication SGI-1.1
Designed to harmonize with NEMA Standards
Publication No. ICS 1.1-1987 and provides general
guidelines for the application, installation, and
maintenance of solid-state control in the form of
individual devices or packaged assemblies
incorporating solid-state components.
Product Compatibility and Download
Center at rok.auto/pcdc
Download the most current version of the add-on
profiles, firmware, and other updates.
Product Certifications website,
rok.auto/certifications
Provides declarations of conformity, certificates,
and other certification details.
Slide the thumb screw on the chassis of your industrial computer to the
right.
Slide the thumb screw here.
6.
7.
8.
Hand-tighten the thumb screw to secure the PCI riser card in place.
Complete the steps in the Reinstall the Cover section from the
user manual for your particular industrial computer model listed in
Additional Resources.
Complete the steps in the Post-configuration section from the
user manual for your particular industrial computer model listed in
Additional Resources.
Waste Electrical and Electronic Equipment (WEEE)
At the end of life, this equipment should be collected separately from any unsorted municipal waste.
Your comments help us serve your documentation needs better. If you have any suggestions on how to improve our content, complete the form at rok.auto/docfeedback.
For technical support, visit rok.auto/support.
Rockwell Otomasyon Ticaret A.Ş. Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400 EEE Yönetmeliğine Uygundur
Allen-Bradley, ASEM, expanding human possibility, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Publication 6300V-IN007B-EN-P - October 2023 | Supersedes Publication 6300V-IN007A-EN-P - July 2023
Copyright © 2023 Rockwell Automation, Inc. All rights reserved. Printed in Italy,
*PN-701227*
PN-701227
DIR 10007457824 (Version 01)
Vendor Code 80460223.01
">