Allen-Bradley Armor PowerFlex Installation Instructions

Installation Instructions
Original Instructions
Armor PowerFlex Replacement Mounting Feet
Catalog Number 35-MMF-AB
Summary of Changes
This publication contains the following new or updated information. This list includes substantive updates only and is not intended to reflect all changes.
Topic
Page
Updated tightening torque.
1
ATTENTION: Only trained and qualified personnel familiar with the drive and associated machinery can plan or implement the installation, startup,
adjustment, and subsequent maintenance or repair of the system. You must have previous experience with and a basic understanding of electrical
terminology, configuration procedures, required equipment, and safety precautions. See publication 35-UM001.
Package Contents
Tighten the Screws
2
Place the Mounting Feet in the Desired Position
1
Installation is Complete
3
Make sure that the mounting feet are aligned with the keyed
protrusions on the back of the Armor™ PowerFlex® drive. For more
information about mounting options, see the Armor PowerFlex
Drives User Manual, publication 35-UM001.
Tightening Torque: 2.94…3.14 N•m (26.0…27.8 lb•in)
4 M6 Screws
Approximate Dimensions in mm (in.)
86.0
(3.39)
28.0
(1.10)
3.0
(0.12)
Additional Resources
These documents contain additional information concerning related products from Rockwell Automation.
Resource
Description
Armor PowerFlex Drives Specifications, publication 35-TD001
Provides complete product selection information and specifications for Armor™ PowerFlex® drives and
accessories.
Armor PowerFlex Drives User Manual, publication 35-UM001
Provides information on how to install, set up, program, operate, and troubleshoot Armor PowerFlex
drives.
Armor PowerFlex Drives Installation Instructions, publication 35-PC001
Provides information on how to install and set up Armor PowerFlex drives.
Safety Guidelines for the Application, Installation, and Maintenance of Solid-state
Control, publication SGI-1.1
Designed to harmonize with NEMA Standards Publication No. ICS 1.1-1987 and provides general
guidelines for the application, installation, and maintenance of solid-state control in the form of
individual devices or packaged assemblies incorporating solid-state components.
Wiring and Grounding Guidelines for Pulse-width Modulated (PWM) AC Drives,
publication DRIVES-IN001
Provides provides basic information to install, protect, wire, and ground pulse-width modulated (PWM)
AC drives.
Product Certifications website, rok.auto/certifications
Provides declarations of conformity, certificates, and other certification details.
Waste Electrical and Electronic Equipment (WEEE)
At the end of life, this equipment should be collected separately from any unsorted municipal waste.
Rockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec.
Your comments help us serve your documentation needs better. If you have any suggestions on how to improve our content, complete the form at rok.auto/docfeedback.
For technical support, visit rok.auto/support.
Rockwell Otomasyon Ticaret A.Ş. Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400 EEE Yönetmeliğine Uygundur
Allen-Bradley, Armor, expanding human possibility, PowerFlex, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies
Publication 35-IN004B-EN-P - August 2023 | Supersedes Publication 35-IN004A-EN-P - February 2022
Copyright © 2023 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
">