Installation Instructions
Original Instructions
Armor PowerFlex Ferrite Core Replacement Kit
Catalog Number 35-ENETCORE
ATTENTION: Only trained and qualified personnel familiar with the drive and associated machinery can plan or implement the installation, startup,
adjustment, and subsequent maintenance or repair of the system. You must have previous experience with and a basic understanding of electrical
terminology, configuration procedures, required equipment, and safety precautions. See publication 35-UM001
SHOCK HAZARD: To avoid electrical shock, open the appropriate upstream protection (disconnect switch or branch circuit protection) before
connecting and disconnecting cables.
Do not operate controls or open covers without appropriate personal protective equipment. Failure to comply can result in serious injury or death.
Cat. No. 35-ENETCORE Armor PowerFlex Ferrite Core Replacement
Package Contents
Install Armor™ PowerFlex® Ferrite Cores on Ethernet Cables
IMPORTANT
To maintain EMC compliance, the ferrite cores must be
installed on each Ethernet cable, close to the connector.
IMPORTANT
Do not install the ferrite cores over any cable labels.
13.5…14 mm (0.53…0.55 in.)
approximate distance
Ferrite Cores
Rockwell Automation Support
Use these resources to access support information.
Technical Support Center
Find help with how-to videos, FAQs, chat, user forums, Knowledgebase, and product notification updates.
Local Technical Support Phone Numbers
Locate the telephone number for your country.
rok.auto/support
rok.auto/phonesupport
Technical Documentation Center
Quickly access and download technical specifications, installation instructions, and user manuals.
rok.auto/techdocs
Literature Library
Find installation instructions, manuals, brochures, and technical data publications.
rok.auto/literature
Product Compatibility and Download Center (PCDC)
Download firmware, associated files (such as AOP, EDS, and DTM), and access product release notes.
rok.auto/pcdc
Documentation Feedback
Your comments help us serve your documentation needs better. If you have any suggestions on how to improve our content, complete the form at rok.auto/docfeedback.
Waste Electrical and Electronic Equipment (WEEE)
At the end of life, this equipment should be collected separately from any unsorted municipal waste.
Rockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec.
Rockwell Otomasyon Ticaret A.Ş. Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400 EEE Yönetmeliğine Uygundur
Allen-Bradley, Armor, expanding human possibility, PowerFlex, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Publication 35-IN009A-EN-P - June 2023
Copyright © 2023 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
*5014155200*
5014155200
5014155200
">