Installation Instructions
Original Instructions
Armor PowerFlex Replacement Gland Plates
Catalog Numbers 35-CPG-AB, 35-RPG-AB, 35-SPG-AB
ATTENTION: Only trained and qualified personnel familiar with the drive and associated machinery can plan or implement the installation, startup,
adjustment, and subsequent maintenance or repair of the system. You must have previous experience with and a basic understanding of electrical
terminology, configuration procedures, required equipment, and safety precautions. See the Armor PowerFlex User Manual, publication 35-UM001.
SHOCK HAZARD: To avoid electrical shock, open the appropriate upstream protection (disconnect switch or branch circuit protection) before
connecting and disconnecting cables.
Do not operate controls or open covers without appropriate personal protective equipment. Failure to comply can result in serious injury or death.
Package Contents
Cat. No. 35-CPG-AB Conduit Gland Plate
Cat. No. 35-RPG-AB Round Connector Gland Plate
Cat. No. 35-SPG-AB Square Connector Gland Plate
For instructions on how to remove and replace the Power Section Cover, see publication 35-IN002.
For instructions on how to remove and replace the Power Section Door, see publication 35-IN001.
Frame size A
Frame size B
Armor® PowerFlex® Variable-Frequency Drive Without Gland Plate (Power Section Cover and Power Section Door Removed)
Armor PowerFlex Replacement Gland Plates Installation Instructions
Frame size A
Frame size B
Place the Gland Plate in the Correct Position and Tighten the Screws
1
Cat. No. 35-CPG-AB Conduit Gland Plate
Tightening Torque: 1.4…1.6 N•m (12.4…14.2 lb•in)
4 M4 Screws
Cat. No. 35-RPG-AB Round Connector Gland Plate
Tightening Torque: 1.4…1.6 N•m (12.4…14.2 lb•in)
4 M4 Screws
Cat. No. 35-SPG-AB Square Connector Gland Plate
Tightening Torque: 1.4…1.6 N•m (12.4…14.2 lb•in)
4 M4 Screws
Prepare to Connect the Wires
2
2
Rockwell Automation Publication 35-IN005B-EN-P - May 2023
Armor PowerFlex Replacement Gland Plates Installation Instructions
Frame size A
Frame size B
Connect the Wires to the Terminal Block and Tighten the Screws
3
Tightening Torque: 1.6…1.8 N•m (14…16 lb•in)
8 Screws
Cat. No. 35-CPG-AB Conduit Gland Plate
When you are using the conduit gland plate, verify that
the terminal block is wired correctly for your application.
Maximum Wire Size = 8.4 mm2 (8 AWG)
Cat. No. 35-RPG-AB Round Connector Gland Plate
(1)
(1)
(2)
(4)
(3)
(1)
(1)
(2)
(4)
(3)
(3)
(4)
(3)
(4)
(2)
Note
Wire Color
Terminal Designation
1
Green
Ground
2
Red
R
3
White
S
4
Black
T
(2)
Cat. No. 35-SPG-AB Square Connector Gland Plate
(1)
(1)
(2)
(4)
(3)
(3)
(4)
(1)
(1)
(2)
(4)
(3)
(3)
(4)
(2)
(2)
Rockwell Automation Publication 35-IN005B-EN-P - May 2023
3
Armor PowerFlex Replacement Gland Plates Installation Instructions
Frame size A
Frame size B
Install the Power Section Cover
(for details, see publication 35-IN002)
4
Cat. No. 35-CPG-AB Conduit Gland Plate
Tightening Torque: 1.4…1.6 N•m (12.4…14.2 lb•in)
1 M4 Screw
Cat. No. 35-RPG-AB Round Connector Gland Plate
Tightening Torque: 1.4…1.6 N•m (12.4…14.2 lb•in)
1 M4 Screw
Cat. No. 35-SPG-AB Square Connector Gland Plate
Tightening Torque: 1.4…1.6 N•m (12.4…14.2 lb•in)
1 M4 Screw
4
Rockwell Automation Publication 35-IN005B-EN-P - May 2023
Armor PowerFlex Replacement Gland Plates Installation Instructions
Frame size A
Frame size B
Install the Power Section Door
(for details, see publication 35-IN001)
5
Cat. No. 35-CPG-AB Conduit Gland Plate
Tightening Torque: 1.4…1.6 N•m (12.4…14.2 lb•in)
4 M4 Screws
Cat. No. 35-RPG-AB Round Connector Gland Plate
Tightening Torque: 1.4…1.6 N•m (12.4…14.2 lb•in)
4 M4 Screws
Cat. No. 35-SPG-AB Square Connector Gland Plate
Tightening Torque: 1.4…1.6 N•m (12.4…14.2 lb•in)
4 M4 Screws
Rockwell Automation Publication 35-IN005B-EN-P - May 2023
5
Additional Resources
These documents contain additional information concerning related products from Rockwell Automation.
Resource
Description
Armor PowerFlex Drives Specifications, publication 35-TD001
Provides product selection information and specifications for Armor PowerFlex drives and accessories.
Armor PowerFlex Drives User Manual, publication 35-UM001
Information on how to install, set up, program, operate, and troubleshoot Armor PowerFlex drives.
Armor PowerFlex Drives Installation Instructions, publication 35-PC001
Provides information on how to install and set up Armor PowerFlex drives.
Armor PowerFlex Replacement Doors Installation Instructions, publication 35-IN001
Provides information on how to install and replace power and logic section doors on the Armor PowerFlex
drive.
Armor PowerFlex Replacement Power Section Covers Installation Instructions,
publication 35-IN002
Provides information on how to install and replace power section covers on the Armor PowerFlex drive.
Safety Guidelines for the Application, Installation, and Maintenance of Solid-state
Control, publication SGI-1.1
Designed to harmonize with NEMA Standards Publication No. ICS 1.1-1987 and provides general guidelines
for the application, installation, and maintenance of solid-state control in the form of individual devices or
packaged assemblies incorporating solid-state components.
Wiring and Grounding Guidelines for Pulse-width Modulated (PWM) AC Drives,
publication DRIVES-IN001
Provides provides basic information to install, protect, wire, and ground pulse-width modulated (PWM) AC
drives.
Product Certifications website, rok.auto/certifications
Provides declarations of conformity, certificates, and other certification details.
Waste Electrical and Electronic Equipment (WEEE)
At the end of life, this equipment should be collected separately from any unsorted municipal waste.
Rockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec.
Your comments help us serve your documentation needs better. If you have any suggestions on how to improve our content, complete the form at rok.auto/docfeedback.
For technical support, visit rok.auto/support.
Rockwell Otomasyon Ticaret A.Ş. Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400 EEE Yönetmeliğine Uygundur
Allen-Bradley, Armor, expanding human possibility, PowerFlex, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Publication 35-IN005B-EN-P - May 2023 | | Supersedes Publication 35-IN005A-EN-P - February 2022
Copyright © 2023 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
*5014141301*
5014141301
PN 5014 141 301
">
