Installation Instructions
Original Instructions
Armor PowerFlex Replacement Power Section Cover
Catalog Numbers 35-PSC-A, 35-PSC-B
ATTENTION: Only trained and qualified personnel familiar with the drive and associated machinery can plan or implement the installation, startup,
adjustment, and subsequent maintenance or repair of the system. You must have previous experience with and a basic understanding of electrical
terminology, configuration procedures, required equipment, and safety precautions. See the Armor PowerFlex User Manual, publication 35-UM001.
SHOCK HAZARD: To avoid electrical shock, open the appropriate upstream protection (disconnect switch or branch circuit protection) before
connecting and disconnecting cables.
Do not operate controls or open covers without appropriate personal protective equipment. Failure to comply can result in serious injury or death.
Package Contents
Frame size A
Frame size B
Cat. No. 35-PSC-A
Cat. No. 35-PSC-B
You must remove the power section doors on the unit before you begin. See publication 35-IN001.
Loosen the Screw
1
Tether for power
section door
Tether for power
section door
Armor PowerFlex Replacement Power Section Cover Installation Instructions
Frame size A
Frame size B
Detach Tether and Remove the Cover
2
The Cover is Removed
3
Attach the Power Section Door Tether
4
2
Rockwell Automation Publication 35-IN002B-EN-P - May 2023
Armor PowerFlex Replacement Power Section Cover Installation Instructions
Frame size A
Frame size B
Replace the Cover
5
Tighten the Screw
Tightening Torque: 1.4…1.6 N•m (12.4…14.2 lb•in)
1 M4 Screw
6
Installation is Complete
7
You must replace the power section doors on the unit after you are finished. See publication 35-IN001.
Rockwell Automation Publication 35-IN002B-EN-P - May 2023
3
Approximate Dimensions — mm (in.)
Cat. No. 35-PSC-B
Cat. No. 35-PSC-A
126.6
(4.98)
176.1
(16.93)
106.5
(4.19)
29.2
(1.15)
162.5
(6.40)
29.0
(1.14)
Waste Electrical and Electronic Equipment (WEEE)
At the end of life, this equipment should be collected separately from any unsorted municipal waste.
Rockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec.
Your comments help us serve your documentation needs better. If you have any suggestions on how to improve our content, complete the form at rok.auto/docfeedback.
For technical support, visit rok.auto/support.
Rockwell Otomasyon Ticaret A.Ş. Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400 EEE Yönetmeliğine Uygundur
Allen-Bradley, Armor, expanding human possibility, PowerFlex, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Publication 35-IN002B-EN-P - May 2023 | | Supersedes Publication 35-IN002A-EN-P - February 2022
Copyright © 2023 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
*5014141001*
5014141001
PN 5014 141 001
">