Installation Instructions
Original Instructions
Armor PowerFlex Replacement Doors
Catalog Numbers 35-LSD-AB, 35-PSD-A, 35-PSD-B
ATTENTION: Only trained and qualified personnel familiar with the drive and associated machinery can plan or implement the installation, startup,
adjustment, and subsequent maintenance or repair of the system. You must have previous experience with and a basic understanding of electrical
terminology, configuration procedures, required equipment, and safety precautions. See the Armor PowerFlex User Manual, publication 35-UM001.
SHOCK HAZARD: To avoid electrical shock, open the appropriate upstream protection (disconnect switch or branch circuit protection) before
connecting and disconnecting cables.
Do not operate controls or open covers without appropriate personal protective equipment. Failure to comply can result in serious injury or death.
Cat. No. 35-LSD-AB Logic Section Door
Package Contents
Frame size A
Frame size B
Loosen the Screws
1
4 M4 Screws
4 M4 Screws
Armor PowerFlex Replacement Doors Installation Instructions
Frame size A
Frame size B
Remove the Cover
2
Remove/Assemble the Tether
3
Replace the Cover
4
2
Rockwell Automation Publication 35-IN001B-EN-P - May 2023
Armor PowerFlex Replacement Doors Installation Instructions
Frame size A
Frame size B
Tighten the Screws
5
Tightening Torque: 1.4…1.6 N•m (12.4…14.2 lb•in)
4 M4 Screws
Approximate Dimensions — mm (in.)
105.7
(4.16)
43.8
(1.73)
Cat. No. 35-PSD-A Power Section Door
Package Contents
10.2
(0.40)
Cat. No. 35-PSD-B Power Section Door
Package Contents
Rockwell Automation Publication 35-IN001B-EN-P - May 2023
3
Armor PowerFlex Replacement Doors Installation Instructions
Frame size A
Frame size B
Loosen the Screws
1
4 M4 Screws
5 M4 Screws
Remove the Cover
2
Frame size A
Frame size B
Remove/Assemble the Tether
3
4
Rockwell Automation Publication 35-IN001B-EN-P - May 2023
Armor PowerFlex Replacement Doors Installation Instructions
Replace the Cover
4
Tighten the Screws
Tightening Torque: 1.4…1.6 N•m (12.4…14.2 lb•in)
5
4 M4 Screws
5 M4 Screws
Approximate Dimensions — mm (in.)
Frame size A
Frame size B
Cat. No. 35-PSD-A
Cat. No. 35-PSD-B
157.0
(6.18)
185.0
(7.28)
120.2
(4.73)
13.4
(0.53)
Rockwell Automation Publication 35-IN001B-EN-P - May 2023
177.7
(6.99)
14.0
(0.55)
5
Additional Resources
These documents contain additional information concerning related products from Rockwell Automation.
Resource
Description
Armor PowerFlex Drives Specifications, publication 35-TD001
Provides complete product selection information and specifications for Armor™ PowerFlex® drives and
accessories.
Armor PowerFlex Drives User Manual, publication 35-UM001
Provides information on how to install, set up, program, operate, and troubleshoot Armor PowerFlex
drives.
Armor PowerFlex Drives Installation Instructions, publication 35-PC001
Provides information on how to install and set up Armor PowerFlex drives.
American Standards, Configurations, and Ratings: Introduction to
Motor Circuit Design, publication IC-AT001
Provides an overview of American motor circuit design based on methods that are outlined in the NEC.
Industrial Components Preventive Maintenance, Enclosures, and Contact Ratings
Specifications, publication IC-TD002
Provides a quick reference tool for Allen-Bradley industrial automation controls and assemblies.
Safety Guidelines for the Application, Installation, and Maintenance of Solid-state
Control, publication SGI-1.1
Designed to harmonize with NEMA Standards Publication No. ICS 1.1-1987 and provides general
guidelines for the application, installation, and maintenance of solid-state control in the form of
individual devices or packaged assemblies incorporating solid-state components.
Wiring and Grounding Guidelines for Pulse-width Modulated (PWM) AC Drives,
publication DRIVES-IN001
Provides provides basic information to install, protect, wire, and ground pulse-width modulated (PWM)
AC drives.
Product Certifications website, rok.auto/certifications
Provides declarations of conformity, certificates, and other certification details.
Waste Electrical and Electronic Equipment (WEEE)
At the end of life, this equipment should be collected separately from any unsorted municipal waste.
Rockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec.
Your comments help us serve your documentation needs better. If you have any suggestions on how to improve our content, complete the form at rok.auto/docfeedback.
For technical support, visit rok.auto/support.
Rockwell Otomasyon Ticaret A.Ş. Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400 EEE Yönetmeliğine Uygundur
Allen-Bradley, Armor, expanding human possibility, PowerFlex, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Publication 35-IN001B-EN-P - May 2023 | | Supersedes Publication 35-IN001A-EN-P - February 2022
Copyright © 2023 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
*5014140901*
5014140901
PN 5014 140 901
">
