Installation Instructions
25
Bulletin 855HM Metal Horn with LED Beacon 855HM-CGMxxxxxx (Series B)
WARNING
AVERTISSEMENT
WARNUNG
ADVERTENCIA
ATENÇÃO
AVVERTENZA
Disconnect from power source to prevent electrical shock before installing
or servicing. Check power supply voltage and frequency.
Déconnecter l’alimentation avant toute opération d’installation ou de maintenance,
afin d’éviter les décharges électriques. Controler la tension et la fréquence d’alimentation.
Schalten Sie den Strom während der Installation oder bei Wartungsarbeiten ab um
einen elektrischen Schlag zu vermeiden. Prüfen Sie die Spannung und Frequenz der Stromquelle.
Scollegare dall’alimentazione prima dell’installazione e della messa in servizio.
Controllare la tensione di alimentazione e la frequenza.
Desligar a alimentação antes de realizar qualquer intervenção. Verificar a tensão e
frequência da alimentação.
Durante el proceso de instalación o mantenimiento desconectar la tensión de
alimentación para evitar descargas eléctricas. Comprobar tensión y frecuencia de alimentación.
DIMENSIONS
FEATURES:
OPERATING AND MARKING:
Rockwell Automation maintains current product environmental information on its
website at:
Rockwell Automation met à disposition des informations environnementales à jour
sur le produit, sur son site Internet:
Rockwell Automation stellt die aktuellen Produktumweltinformationen auf seiner
Webseite bereit
Potete trovare informazioni ambientali aggiornate sul prodotto sul sito di Rockwell
Automation:
A Rockwell Automation fornece as informações ambientais mais recentes sobre
produtos em seu site:
Rockwell Automation facilita información medioambiental actualizada sobre los
productos en su sitio web:
https://www.rockwellautomation.com/global/about-us/sustainability-ethics/productenvironmental-compliance.page
Publication 855HM-IN002A-MU-P - February 2022
DIR 10006531234 (Version 00)
2/4 Installation instruction for Bulletin 855HM Metal Horn with LED Beacon 855HM-CGMxxxxxx (Series B)
Publication 855HM-IN002A-MU-P - February 2022
DIR 10006531234 (Version 00)
Installation instruction for Bulletin 855HM Metal Horn with LED Beacon 855HM-CGMxxxxxx (Series B)
NOTE: S2 and S3 switches are customer supplied.
BEACON SET-UP (855HM-C*)
Publication 855HM-IN002A-MU-P - February 2022
DIR 10006531234 (Version 00)
3/4
TONE SELECTION
Switch settings are shown in the tone selection table. Black squares are the switch levers in the ON positions.
Example
Dip Switch Shown Set for Tone 1
NOTE: Check factory settings and ensure the correct alarm tone is selected for your country or application
For Technical Support, visit rok.auto/support.
Rockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec.
Product certificates are located in the Rockwell Automation Literature Library: rok.auto/certifications.
EEE Yönetmeliğine Uygundur.
expanding human possibility
TM
AMERICAS: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: 414.382.2000, Fax: (1) 414.382.4444
EUROPE/MIDDLE EAST/AFRICA: Rockwell Automation NV, Pegasus Park, De Kleetlan 12a, 1831 Diegem, Belgium, Tel: (32) 2663 0600, Fax: (32) 2663 0640
ASIA PACIFIC: Rockwell Automation, Level 14, Core F, Cyberport 3, 100 Cyberport Road, Hong Kong, Tel: (852) 2887 4788, Fax: (852) 2501846
Publication 855HM-IN002A-MU-P - February 2022
Copyright © 2022 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.
DIR 10006531234 (Version 00)
">