Installation Instructions
Original Instructions
Rear Mounting Adapter Plate
Bulletin Number 802M
Figure 1 - Limit Switch Mounting Using Rear Mounting Adapter Plate
For proper mounting and thread engagement, select a screw length that can pass through the adapter
plate without bottoming against the back of the limit switch.
#10…32 Screws for Rear
Mounting (Not Supplied)
Tighten to 3.61 N•m (32 lb•in)
29.4 mm (1.16 in.)
Limit Switch Mounting Screws
(Supplied with Adapter Plate)
Tighten to 3.61 N•m (32 lb•in)
46.0 mm (1.81 in.)
Compact Mounting
Dimensions 59.5 mm (2.34 in.)
Large Limit Switch
Mounting Dimensions
Mounting Surface with
Clearance Holes for #10…32
Screws
Waste Electrical and Electronic Equipment (WEEE)
At the end of life, this equipment should be collected separately from any unsorted municipal waste.
Rockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec.
Your comments help us serve your documentation needs better. If you have any suggestions on how to improve our content, complete the form at rok.auto/docfeedback.
For technical support, visit rok.auto/support.
Rockwell Otomasyon Ticaret A.Ş. Kar Plaza İş Merkezi E Blok Kat:6 34752, İçerenköy, İstanbul, Tel: +90 (216) 5698400 EEE Yönetmeliğine Uygundur
Allen-Bradley, expanding human possibility, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Publication 802M-IN005A-EN-P - May 2021 | Supersedes Publication XXXX-X.X.X- Month Year
Copyright © 2021 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
PN-XXXXXX-XX
40060-278-01 Ver 03
">
