Allen-Bradley ArmorBlock I/O DeviceNet Module Installation Instructions

Installation Instructions
Original Instructions
ArmorBlock I/O DeviceNet Module
Catalog Numbers 1732D-8CFGM8
Topic
Summary of Changes
Overview
Environment and Enclosure
Prevent Electrostatic Discharge
Electrical Safety Considerations
Install the Module
Set the Node Address
Mount the Module
Connect the I/O, Network, and Auxiliary Cable to the Module
Configure the Module
Interpret Status Indicators
Specifications
Page
1
1
3
3
3
4
5
5
6
8
8
10
Summary of Changes
This publication contains the following new or updated information. This list includes substantive updates only and is not intended to reflect all changes.
Topic
Updated cordset catalog reference
Page
8
Overview
The ArmorBlock® I/O DeviceNet® module is a standalone 24V DC I/O module that communicates over the DeviceNet network. The sealed IP67 housing of these modules
requires no enclosure. I/O connectors are sealed M8 (Pico™) style while the network and auxiliary power connectors are sealed M12 style.
ArmorBlock I/O DeviceNet Module Installation Instructions
ATTENTION: Read this document and the documents listed in the Additional Resources section about installation, configuration and operation of this equipment before you install, configure,
operate or maintain this product. Users are required to familiarize themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws, and
standards.
Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are required to be carried out by suitably trained personnel in accordance
with applicable code of practice. If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.
岤䠑㖈㸝鄳ծꂁ縨ծ乼⡲ㄤ絶䫡劥❡ㅷ⵸霼ꢓ靀劥俒咓⟄⿺  Ⱖ➭餴彂  鿈ⴔ⴩ⴀ涸剣Ⱒ霃㢊㸝鄳ծꂁ縨ㄤ乼⡲涸湱䎾俒咓կꤑ✫䨾剣鷓欽錞薴ծ岁䖒
ㄤ叻ⲥ涸湱Ⱒ銳宠⛓㢪欽䨪鵮䗳곢擿䜪㸝鄳ㄤ䱹絁霹僈կ
㸝鄳ծ靈侮ծ䫏鵘ծ⢪欽ծ絆鄳ծ䬒⽸ㄤ絶䫡瘝ぐ고乼⡲䗳곢歋絑鵂鷓䔲雲絅涸⚁⚌➃プ䭽撑鷓欽涸乼⡲錞薴㹊倶կ
㥵卓劢䭽撑ⵖ鸣㉁䭷㹁涸倰䒭⢪欽霪霃㢊ⴭ〳腊⠔䰀㹲霃㢊䲿⣘涸⥂䫡կ
ATENCIÓN: Antes de instalar, configurar, poner en funcionamiento o realizar el mantenimiento de este producto, lea este documento y los documentos listados en la sección Recursos
adicionales acerca de la instalación, configuración y operación de este equipo. Los usuarios deben familiarizarse con las instrucciones de instalación y cableado y con los requisitos de todos
los códigos, leyes y estándares vigentes.
El personal debidamente capacitado debe realizar las actividades relacionadas a la instalación, ajustes, puesta en servicio, uso, ensamblaje, desensamblaje y mantenimiento de conformidad
con el código de práctica aplicable. Si este equipo se usa de una manera no especificada por el fabricante, la protección provista por el equipo puede resultar afectada.
ATENÇÃO: Leia este e os demais documentos sobre instalação, configuração e operação do equipamento que estão na seção Recursos adicionais antes de instalar, configurar, operar ou
manter este produto. Os usuários devem se familiarizar com as instruções de instalação e fiação além das especificações para todos os códigos, leis e normas aplicáveis.
É necessário que as atividades, incluindo instalação, ajustes, colocação em serviço, utilização, montagem, desmontagem e manutenção sejam realizadas por pessoal qualificado e
especializado, de acordo com o código de prática aplicável.
Caso este equipamento seja utilizado de maneira não estabelecida pelo fabricante, a proteção fornecida pelo equipamento pode ficar prejudicada.
ВНИМАНИЕ: Перед тем как устанавливать, настраивать, эксплуатировать или обслуживать данное оборудование, прочитайте этот документ и
документы, перечисленные в разделе «Дополнительные ресурсы». В этих документах изложены сведения об установке, настройке и эксплуатации
данного оборудования. Пользователи обязаны ознакомиться с инструкциями по установке и прокладке соединений, а также с требованиями всех
применимых норм, законов и стандартов.
Все действия, включая установку, наладку, ввод в эксплуатацию, использование, сборку, разборку и техническое обслуживание, должны выполняться
обученным персоналом в соответствии с применимыми нормами и правилами.
Если оборудование используется не предусмотренным производителем образом, защита оборудования может быть нарушена.
:
ACHTUNG: Lesen Sie dieses Dokument und die im Abschnitt „Weitere Informationen“aufgeführten Dokumente, die Informationen zu Installation, Konfiguration und Bedienung dieses Produkts
enthalten, bevor Sie dieses Produkt installieren, konfigurieren, bedienen oder warten. Anwender müssen sich neben den Bestimmungen aller anwendbaren Vorschriften, Gesetze und Normen
zusätzlich mit den Installations- und Verdrahtungsanweisungen vertraut machen.
Arbeiten im Rahmen der Installation, Anpassung, Inbetriebnahme, Verwendung, Montage, Demontage oder Instandhaltung dürfen nur durch ausreichend geschulte Mitarbeiter und in
Übereinstimmung mit den anwendbaren Ausführungsvorschriften vorgenommen werden.
Wenn das Gerät in einer Weise verwendet wird, die vom Hersteller nicht vorgesehen ist, kann die Schutzfunktion beeinträchtigt sein.
ATTENTION : Lisez ce document et les documents listés dans la section Ressources complémentaires relatifs à l’installation, la configuration et le fonctionnement de cet équipement avant
d’installer, configurer, utiliser ou entretenir ce produit. Les utilisateurs doivent se familiariser avec les instructions d’installation et de câblage en plus des exigences relatives aux codes, lois
et normes en vigueur.
Les activités relatives à l’installation, le réglage, la mise en service, l’utilisation, l’assemblage, le démontage et l’entretien doivent être réalisées par des personnes formées selon le code de
pratique en vigueur.
Si cet équipement est utilisé d’une façon qui n’a pas été définie par le fabricant, la protection fournie par l’équipement peut être compromise.
:
,
,
,
.
,
,
.
,
,
,
,
,
.
.
ATTENZIONE Prima di installare, configurare ed utilizzare il prodotto, o effettuare interventi di manutenzione su di esso, leggere il presente documento ed i documenti elencati nella sezione
“Altre risorse”, riguardanti l’installazione, la configurazione ed il funzionamento dell’apparecchiatura. Gli utenti devono leggere e comprendere le istruzioni di installazione e cablaggio, oltre ai
requisiti previsti dalle leggi, codici e standard applicabili.
Le attività come installazione, regolazioni, utilizzo, assemblaggio, disassemblaggio e manutenzione devono essere svolte da personale adeguatamente addestrato, nel rispetto delle
procedure previste.
Qualora l’apparecchio venga utilizzato con modalità diverse da quanto previsto dal produttore, la sua funzione di protezione potrebbe venire compromessa.
DİKKAT: Bu ürünün kurulumu, yapılandırılması, işletilmesi veya bakımı öncesinde bu dokümanı ve bu ekipmanın kurulumu, yapılandırılması ve işletimi ile ilgili İlave Kaynaklar bölümünde yer
listelenmiş dokümanları okuyun. Kullanıcılar yürürlükteki tüm yönetmelikler, yasalar ve standartların gereksinimlerine ek olarak kurulum ve kablolama talimatlarını da öğrenmek zorundadır.
Kurulum, ayarlama, hizmete alma, kullanma, parçaları birleştirme, parçaları sökme ve bakım gibi aktiviteler sadece uygun eğitimleri almış kişiler tarafından yürürlükteki uygulama
yönetmeliklerine uygun şekilde yapılabilir.
Bu ekipman üretici tarafından belirlenmiş amacın dışında kullanılırsa, ekipman tarafından sağlanan koruma bozulabilir.
岤䠑✲갪㖈㸞酤鏤㹁乽⡲䧴笞隌劥欴ㅷ⵹锞⯓ꠗ隡姽俒⟝⟃⿻⴪倴 չⰦ➮须彂պ畎眏⚥剤ꡠ㸞酤鏤㹁莅乽⡲姽鏤⪔涸俒⟝⢪欽罏䗳갭擿䜫㸞酤
ㄤꂂ箁䭸爚⚛痘ざ䨾剤岁鋊岁䖒ㄤ垦彋銴宠
⺫䭍㸞酤锅侮❜➰⢪欽⢪欽穉酤䬓⽹ㄤ笞隌瘞⹛⡲鿪䗳갭❜歋䊺竤麕黠殹鎯箻涸➃㆞鹎遤⟃痘ざ黠欽涸㻜⡲岁鋊
㥶卓㼟鏤⪔欽倴ꬌ醢鸤㉂䭸㹁涸欽鸁儘〳腋剚鸤䧭鏤⪔䨾䲿⣘涸⥃隌⸆腋「䴦
POZOR: Než začnete instalovat, konfigurovat či provozovat tento výrobek nebo provádět jeho údržbu, přečtěte si tento dokument a dokumenty uvedené v části Dodatečné zdroje ohledně
instalace, konfigurace a provozu tohoto zařízení. Uživatelé se musejí vedle požadavků všech relevantních vyhlášek, zákonů a norem nutně seznámit také s pokyny pro instalaci a elektrické
zapojení.
Činnosti zahrnující instalaci, nastavení, uvedení do provozu, užívání, montáž, demontáž a údržbu musí vykonávat vhodně proškolený personál v souladu s příslušnými prováděcími předpisy.
Pokud se toto zařízení používá způsobem neodpovídajícím specifikaci výrobce, může být narušena ochrana, kterou toto zařízení poskytuje.
UWAGA: Przed instalacją, konfiguracją, użytkowaniem lub konserwacją tego produktu należy przeczytać niniejszy dokument oraz wszystkie dokumenty wymienione w sekcji Dodatkowe
źródła omawiające instalację, konfigurację i procedury użytkowania tego urządzenia. Użytkownicy mają obowiązek zapoznać się z instrukcjami dotyczącymi instalacji oraz oprzewodowania,
jak również z obowiązującymi kodeksami, prawem i normami.
Działania obejmujące instalację, regulację, przekazanie do użytkowania, użytkowanie, montaż, demontaż oraz konserwację muszą być wykonywane przez odpowiednio przeszkolony personel
zgodnie z obowiązującym kodeksem postępowania.
Jeśli urządzenie jest użytkowane w sposób inny niż określony przez producenta, zabezpieczenie zapewniane przez urządzenie może zostać ograniczone.
OBS! Läs detta dokument samt dokumentet, som står listat i avsnittet Övriga resurser, om installation, konfigurering och drift av denna utrustning innan du installerar, konfigurerar eller
börjar använda eller utföra underhållsarbete på produkten. Användare måste bekanta sig med instruktioner för installation och kabeldragning, förutom krav enligt gällande koder, lagar och
standarder.
Åtgärder som installation, justering, service, användning, montering, demontering och underhållsarbete måste utföras av personal med lämplig utbildning enligt lämpligt bruk.
Om denna utrustning används på ett sätt som inte anges av tillverkaren kan det hända att utrustningens skyddsanordningar försätts ur funktion.
LET OP: Lees dit document en de documenten die genoemd worden in de paragraaf Aanvullende informatie over de installatie, configuratie en bediening van deze apparatuur voordat u dit
product installeert, configureert, bediend of onderhoudt. Gebruikers moeten zich vertrouwd maken met de installatie en de bedradingsinstructies, naast de vereisten van alle toepasselijke
regels, wetten en normen.
Activiteiten zoals het installeren, afstellen, in gebruik stellen, gebruiken, monteren, demonteren en het uitvoeren van onderhoud mogen uitsluitend worden uitgevoerd door hiervoor opgeleid
personeel en in overeenstemming met de geldende praktijkregels.
Indien de apparatuur wordt gebruikt op een wijze die niet is gespecificeerd door de fabrikant, dan bestaat het gevaar dat de beveiliging van de apparatuur niet goed werkt.
2
Rockwell Automation Publication 1732D-IN003B-EN-P - July 2020
ArmorBlock I/O DeviceNet Module Installation Instructions
Environment and Enclosure
ATTENTION: This equipment is intended for use in overvoltage Category II applications (as defined in EN/IEC 60664-1), at altitudes up to 2000 m (6562
ft) without derating.
This equipment is not intended for use in residential environments and may not provide adequate protection to radio communication services in such
environments.
This equipment is supplied as Type 1 enclosed equipment (Only when provided with dust cap on the Input and Output connectors or terminated with
cables). It should not require additional system enclosure when used in locations consistent with the equipment Enclosure Type Ratings. Subsequent
sections of this publication may contain more information regarding specific enclosure type ratings, beyond what this product provides, that are
required to comply with certain product safety certifications
In addition to this publication, see the following:
• Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1, for more installation requirements.
• NEMA Standard 250 and EN/IEC 60529, as applicable, for explanations of the degrees of protection provided by enclosures.
ATTENTION:
• Make sure that all connectors and caps are securely tightened to properly seal the connections against leaks and maintain Type 1 and IP enclosure
type requirements.
• These devices are intended for installation on Industrial Machines in accordance with NFPA79. Due to the nature of these devices (fixed equipment
using cable connections) they may not be considered suitable for fixed installation in accordance with the NEC (NFPA70).
• Read this document and the documents listed in the Additional Resources section about installation, configuration, and operation of this equipment
before you install, configure, operate, or maintain this product. Users are required to familiarize themselves with installation and wiring instructions in
addition to requirements of all applicable codes, laws, and standards.
• Installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are required to be carried out by suitably trained
personnel in accordance with applicable code of practice.
• In case of malfunction or damage, no attempts at repair should be made. The module should be returned to the manufacturer for repair. Do not
dismantle the module.
Prevent Electrostatic Discharge
ATTENTION: This equipment is sensitive to electrostatic discharge, which can cause internal damage and affect normal operation. Follow these
guidelines when you handle this equipment:
• Touch a grounded object to discharge potential static.
• Wear an approved grounding wriststrap.
• Do not touch connectors or pins on component boards.
• Do not touch circuit components inside the equipment.
• Use a static-safe workstation, if available.
• Store the equipment in appropriate static-safe packaging when not in use.
Electrical Safety Considerations
ATTENTION: Power to this equipment and all connected I/O must be supplied from a source compliant with the following:
• Limited Voltage Supply compliant with UL508
IMPORTANT
Any illustrations, charts, sample programs, and layout examples shown in this publication are intended solely for the purposes of example. Since
there are many variables and requirements associated with any particular installation, Rockwell Automation does not assume responsibility or
liability for actual use based on the examples shown in this publication.
At the end of its life, this equipment should be collected separately from any unsorted municipal waste.
Rockwell Automation Publication 1732D-IN003B-EN-P - July 2020
3
ArmorBlock I/O DeviceNet Module Installation Instructions
Module Identification
DeviceNet
M12-style
connector
DeviceNet
M12-style
connector
Node address switches
Status
indicators
M8-style I/O connectors
M12-style
auxiliary
power in
ATTENTION: Make sure that all connectors and caps are securely tightened to properly seal the connections against leaks and maintain Type 1 and IP
enclosure type requirements.
Catalog Number Explanation
See the table for a description of the module catalog number.
Catalog Number
Description
Network Connector
I/O Connector
Auxiliary Power
1732D-8CFGM8
8 channel 24V DC configurable digital DeviceNet module
Dual 5-pin M12
8, 3-pin M8
Single 4-pin M12
Install the Module
To install the module:
•
•
•
4
Set the network address
Mount the module
Connect the I/O, Network, and Auxiliary cables to the module.
Rockwell Automation Publication 1732D-IN003B-EN-P - July 2020
ArmorBlock I/O DeviceNet Module Installation Instructions
Set the Node Address
Valid node addresses are 00…63.
Set the node address using either the rotary switches, RSNetWorx™ for DeviceNet, DeviceNetManager™, or another software configuration tool. Setting the switches at any
number from 64 to 99 lets the software have address control.
Each module is shipped set for node address 63. Remove the caps on the front of the module to access the switches. The two switches are:
•
•
X10 (most significant digit) – left side of module
X1 (least significant digit) – right side of module
To reset the node address, use a small blade screwdriver to rotate the switches. Align the small black dot on the switch with the number setting you wish to use and then
cycle power.
The rotary switches are read periodically. If the switches have been changed since the last time they were read and they no longer match the on line address, a minor fault
will occur, which is indicated by a flashing red MOD light-emitting diode (LED). Settings between 64 and 99 cause the module to use the last valid node address stored
internally. Example: The last setting internally was 40. If a change is made to 68, and then you power up, the address will default to 40.
Set Network Address
Example shows default
node address set at 63.
The module is equipped with Auto Baud detect. Auto Baud lets the module read the settings already in use on your DeviceNet network and automatically adjusts to follow
those settings.
Mount the Module
Each module has two sets of mounting holes that are used to mount the module directly to a panel or machine. The module can be front or side mounted. Mounting holes
accommodate #6 (M3) pan head screws. The torque specification is 0.67 N•m (6 in•lb).
Product Dimensions
See the mounting dimensions illustration to help you mount the module.
Rockwell Automation Publication 1732D-IN003B-EN-P - July 2020
5
ArmorBlock I/O DeviceNet Module Installation Instructions
Module Dimensions
37 mm (1.46 in.)
19 mm (0.75 in.)
19.8 mm
(0.78 in.)
166.5 mm (6.56 in.)
179 mm (7.05 in.)
168.6 mm (6.64 in.)
Front Mounting
27 mm
(1.06 in.)
43.3 mm
(1.70 in.)
Side Mounting
32 mm
(1.26 in.)
Mount the Module in High Vibration Areas
If you will mount the module in an area that is subject to shock or vibration, we recommend that you use a flat and lock washer to mount the module. Mount the flat and lock
washer as shown in the following illustration. Torque the mounting screws to 0.67 N•m (6 in•lb).
High Vibration Area Mounting
Lock washer
Flat washer
Connect the I/O, Network, and Auxiliary Cable to the Module
The ArmorBlock family offers 5-pin micro-style PCB mounting connectors or 3-pin pico-style PCB mounting connectors. We provide caps to cover the unused connectors on
your module. Connect the quick-disconnect cord sets you selected for your module to the appropriate ports.
6
Rockwell Automation Publication 1732D-IN003B-EN-P - July 2020
ArmorBlock I/O DeviceNet Module Installation Instructions
I/O Connectors
Self-configuring Modules
The 1732D-8CFGM8 self-configuring module contains both input and output functionality.
If an I/O point is to be an output, dedicate that point as an output with a wired load and energize it through a control program. Energized outputs will show an associated
active input, which can be used as a feedback mechanism to ensure that the output is turned on.
If an I/O point is to be an input, wire the input device as normal and leave the associated output unenergized at all times.
Pico-style 3-pin Female Connector
Pin
Function
1
Sensor source voltage
3
Return
4
Input or output
View into Connector
ATTENTION: Make sure that all connectors and caps are securely tightened to properly seal the connections against leaks and maintain Type 1 and IP
enclosure and requirements.
IMPORTANT
If the devices (sensors) connected to the input connections require Class 2 power to operate, the auxiliary power connections of this equipment
must be powered by a Class 2 source.
I/O Self-configure Circuitry
Turn on output
Output
circuit
Scan list
Device
Connection pin
Input is on
(or output is on)
Input
circuit
DeviceNet Connector
Micro-style 5-pin Input Male Connector
View into Connector 1
Pin
Value
1
Drain
2
V+
3
V-
4
CAN_H
5
CAN_L
Micro-style 5-pin Output Female Connector
View into Connector 2
Pin
Value
1
Drain
2
V+
3
V-
4
CAN_H
5
CAN_L
Rockwell Automation Publication 1732D-IN003B-EN-P - July 2020
7
ArmorBlock I/O DeviceNet Module Installation Instructions
To terminate the module, use the second DeviceNet connector and a Rockwell Automation® termination resistor (Cat. No. 1485A-T1D5).
Auxiliary Power Connector
Input and output devices are powered through the module I/O connectors. Removing auxiliary power will deactivate all sensors and actuators unless they are powered from
a separate source. If a separate source is used, devices may still be active, even if auxiliary power is removed. To ensure that auxiliary power controls the activation/
deactivation of sensors and actuators, always wire input sensors and output actuators directly to the I/O connectors. Attach the mini-style 4-pin connector to the mini-style
4-pin receptacle as shown.
Micro-style 4-Pin Male Connector
Pin
Value
Function
1
24V DC
Output power+
2
24V DC
Sensor/MDL power+
3
Return
Sensor/MDL power-
4
Return
Output power-
View into Connector
ATTENTION: This equipment is considered Group 1, Class A industrial equipment according to IEC/CISPR 11. Without appropriate precautions, there
may be difficulties with electromagnetic compatibility in residential and other environments due to conducted and radiated disturbance.
Configure the Module
See Essential Components Selection Guide, publication EC-CA100, for Rockwell Automation cable and cord set offerings or use the configuration tools available at
rok.auto/systemtools.
Communicate With Your Module
This ArmorBlock module I/O is exchanged with the master through a poll, change of state, or cyclic connection.
Cyclic – allows configuration of the block as an I/O client. The block will produce and consume its I/O cyclically at the rate configured.
Polled – a master initiates communication by sending its polled I/O message to the module. The module consumes the message, updates outputs, and produces a response.
The response has input data.
Change of state – productions occur when an input changes or a fault condition occurs. If no input or fault condition change occurs within the expected packet rate, a
heartbeat production occurs. This heartbeat production tells the scanner module that the I/O module is alive and ready to communicate. Consumption occurs when data
changes and the master produces new output data to the I/O block.
Byte
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Produced 0
I7
I6
I5
I4
I3
I2
I1
I0
Consumes 0
O7
O6
I5
O4
O3
O2
O1
O0
Where: I = Input O = Output
The 1732D-8CFGM8 self-assigning module contains both input and output functionality. The module does not need to be configured.
If an I/O point is to be an output, dedicate that point as an output with a wired load and energize it through a control program.
If an I/O point is to be an input, wire the input device as normal and leave the associated output unenergized at all times.
Interpret Status Indicators
This module has the following indicators:
8
Rockwell Automation Publication 1732D-IN003B-EN-P - July 2020
ArmorBlock I/O DeviceNet Module Installation Instructions
•
•
•
Network and Module status indicators for DeviceNet
Auxiliary power indicator
Individual I/O status indicators for inputs and outputs
Module status indicator
Network status indicator
I/O status indicator
Auxiliary power status indicator
Indicator Status for Modules
Status
Off
Flashing green
Module status
Green
Flashing red
Red
Off
Description
No power applied to device.
The module needs commissioning due to missing, incomplete, or incorrect
configuration.
Device operating normally.
Recoverable fault.
Watchdog timeout or the module has an unrecoverable fault and may need replacing.
Device is not online:
• The device has not completed the dup_MAC_id test yet.
• The device may not be powered yet.
The device is on line with no connections in the established state.
Flashing green
Network status
Green
• The device has passed the dup_MAC_id test, is on line, but has no established connections to
other nodes.
• As a Group 2 device, it means that the device is not allocated to a master.
The device is operating in a normal condition and the device is on line with connections
in the established state.
• As a Group 2 device, it means that the device is allocated to a master.
Flashing red
Red
Auxiliary power status
Digital output status
Digital input status
Flashing red/green
Off
Green
Off
Yellow
Off
Yellow
An I/O connection has timed out.
Failed communication device - The device has detected an error that has rendered it
incapable of communication on the network (dup_MAC_id failure or bus-off).
The module is performing a powerup self-test.
No auxiliary power
Auxiliary power is present.
Output not energized.
Output energized and output power applied.
No valid input.
Valid input.
Rockwell Automation Publication 1732D-IN003B-EN-P - July 2020
9
ArmorBlock I/O DeviceNet Module Installation Instructions
Specifications
Input Specifications – 1732D-8CFGM8
Attribute
Value
Number of inputs
8
Voltage, off-state input, max
5V DC
Voltage, on-state input, max
30V DC
Voltage, on-state input, min
11V DC
Current, off-state input, max
1.5 mA
Current, on-state input, max
5 mA
Voltage, sensor source, max
30V DC
Voltage, sensor source, min
11V DC
Current, sensor source, max (per input)
50 mA
Current, sensor source, max (per
module)
400 mA
Input delay time
ON to OFF
OFF to ON
0…16000 µs
Output Specifications – 1732D-8CFGM8
Attribute
Value
Number of outputs
8
Voltage drop, on-state output, max
0.5V DC
Voltage off-peak blocking, min
30V DC
Voltage, on-state output, max
30V DC
Current on-state output, max
0.5 A
Current per module, max
4.0 A
Leakage current, off-state output, max
50 µA
Surge current per output, min
1.2 A for 10 ms, repeatable every 2 s
Isolation voltage
Tested at 500V DC for 60 s, between auxiliary power and network (I/O to logic)
General Specifications
Attribute
Value
Voltage, auxiliary power, max
30V DC
Voltage, auxiliary power, min
11V DC
Voltage, DeviceNet power, max
25V DC
Voltage, DeviceNet power, min
11V DC
Current, DeviceNet power, max
100 mA
Current, DeviceNet power, min
100 mA
Current, I/O channel, max
4A
Current, auxiliary power connector, max per module
10 A
Current, sensor source, per input, max
50 mA
Current, sensor source, per connector, max
100 mA
Communication rate
125 Kbps @ 500 m (1640 ft) for thick cable, flat media length 375 m (1378 ft)
250 Kbps @ 200 m (600 ft) for thick cable, flat media length 150 m (492 ft)
500 Kbps @ 100 m (330 ft) for thick cable, flat media length 75 m (246 ft)
Status indicators
Module status - red/green
Network status - red/green
Auxiliary power - green
I/O LED - yellow
10
Rockwell Automation Publication 1732D-IN003B-EN-P - July 2020
ArmorBlock I/O DeviceNet Module Installation Instructions
General Specifications (Continued)
Attribute
Value
Dimensions (HxWxD), approx.
174 x 69 x 48 mm (6.9 x 2.7 x 1.9 in.)
Weight, approx.
203 g (7.16 oz.)
Enclosure type rating
Meets IP65/67/69K (when marked)
Wiring category(1)(2)
2 - on signal ports
Isolation voltage
Basic
Tested at 500V DC for 60 s, between auxiliary power and network (I/O to logic)
(1) Use this Conductor Category information for planning conductor routing. See Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1.
(2)
Use this Conductor Category information for planning conductor routing as described in the appropriate System Level Installation Manual.
Environmental Specifications
Attribute
Value
Temperature, operating
IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock):
-20 °C < Ta < +60 °C (-4 °F < Ta < +140 °F)
Temperature, ambient, max.
60 °C (140 °F)
Temperature, nonoperating
IEC 60068-2-1 (Test Ab, Unpackaged nonoperating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged nonoperating Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged nonoperating Thermal Shock):
-40…+85 °C (-40…+185 °F)
Relative humidity
IEC 60068-2-30 (Test Db, Unpackaged Damp Heat):
5…95% noncondensing
Vibration
IEC 60068-2-6 (Test Fc, Operating):
5 g @ 10...500 Hz
Shock, operating
IEC 60068-2-27 (Test Ea, Unpackaged Shock):
30 g
Shock, nonoperating
IEC 60068-2-27 (Test Ea, Unpackaged Shock):
50 g
Emissions
IEC 61000-6-4
ESD immunity
IEC 61000-4-2:
6 kV contact discharges
8 kV air discharges
Radiated RF immunity
IEC 61000-4-3:
10V/m with 1 kHz sine-wave 80% AM from 80…2000 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz
10V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz
10V/m with 1 kHz sine-wave 80% AM from 2000…2700 MHz
EFT/B immunity
IEC 61000-4-4:
±4 kV @ 5 kHz on power ports
±2 kV @ 5 kHz on signal ports
±2 kV @ 5 kHz on communications ports
Surge transient immunity
IEC 61000-4-5:
±1 kV line-line(DM) and ±2 kV line-earth(CM) on power ports
±1 kV line-line(DM) and ±2 kV line-earth(CM) on signal ports
±2 kV line-earth(CM) on shielded ports
Conducted RF immunity
IEC 61000-4-6:
10V rms with 1 kHz sine-wave 80% AM from 150 kHz…80 MHz
Rockwell Automation Publication 1732D-IN003B-EN-P - July 2020
11
ArmorBlock I/O DeviceNet Module Installation Instructions
Certifications
Certification (when product is marked)(1)
Value
c-UL-us
UL Listed Industrial Control Equipment, certified for US and Canada. See UL File E322657.
CE
European Union 2014/30/EU EMC Directive, compliant with:
EN 61326-1; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
EN 61000-6-4; Industrial Emissions
EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)
European Union 2011/65/EU RoHS, compliant with:
EN 50581; Technical documentation
RCM
Australian Radiocommunications Act, compliant with:
EN 61000-6-4; Industrial Emissions
KC
Korean Registration of Broadcasting and Communications Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3
DeviceNet
ODVA conformance tested to DeviceNet specifications.
(1) See the Product Certification link at rok.auto/certifications for Declaration of Conformity, Certificates, and other certification details.
Additional Resources
These documents contain additional information concerning related products from Rockwell Automation.
Resource
Description
Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1
Provides general guidelines for installing a Rockwell Automation industrial
system.
Product Certifications website: rok.auto/certifications
Provides declarations of conformity, certificates, and other certification details.
If you would like a manual, you can:
•
•
12
download a free electronic version from the Internet: rok.auto/literature.
purchase a printed manual by contacting your local Allen-Bradley® distributor or Rockwell Automation representative
Rockwell Automation Publication 1732D-IN003B-EN-P - July 2020
ArmorBlock I/O DeviceNet Module Installation Instructions
Notes:
Rockwell Automation Publication 1732D-IN003B-EN-P - July 2020
13
ArmorBlock I/O DeviceNet Module Installation Instructions
14
Rockwell Automation Publication 1732D-IN003B-EN-P - July 2020
ArmorBlock I/O DeviceNet Module Installation Instructions
Rockwell Automation Publication 1732D-IN003B-EN-P - July 2020
15
Rockwell Automation Support
Use these resources to access support information.
Technical Support Center
Knowledgebase
Local Technical Support Phone Numbers
Literature Library
Product Compatibility and Download Center
(PCDC)
Find help with how-to videos, FAQs, chat, user forums, and product notification updates.
Access Knowledgebase articles.
Locate the telephone number for your country.
Find installation instructions, manuals, brochures, and technical data publications.
Download firmware, associated files (such as AOP, EDS, and DTM), and access product
release notes.
rok.auto/support
rok.auto/knowledgebase
rok.auto/phonesupport
rok.auto/literature
rok.auto/pcdc
Documentation Feedback
Your comments help us serve your documentation needs better. If you have any suggestions on how to improve our content, complete the form at rok.auto/docfeedback.
Waste Electrical and Electronic Equipment (WEEE)
At the end of life, this equipment should be collected separately from any unsorted municipal waste.
Rockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec.
Your comments help us serve your documentation needs better. If you have any suggestions on how to improve our content, complete the form at rok.auto/docfeedback.
For technical support, visit rok.auto/support.
Rockwell Otomasyon Ticaret A.Ş. Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400 EEE Yönetmeliğine Uygundur
Allen-Bradley, ArmorBlock, DeviceNetManager, expanding human possibility, FactoryTalk, Pico, Rockwell Automation, RSNetWorx, and TechConnect are
trademarks of Rockwell Automation, Inc.
DeviceNet is a trademark of ODVA, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Publication 1732D-IN003B-EN-P - July 2020 | Supersedes Publication 1732D-IN003A-EN-P-April 2020
Copyright © 2020 Rockwell Automation, Inc. All rights reserved. Printed in Singapore.
PN-593698
">