Installation Instructions
1606-XLA-S44 SER B
Side Mount Bracket
PU-200.015.93-xxC
Product Description
The 1606-XLA-S44 SER B is a mechanical accessory to mount the device sideways with or without
utilizing a DIN-rail to save installation depth.
The two aluminum brackets and the black plastic slider of the unit have to be detached, so that the 1606XLA-S44 SER B steel bracket can be mounted.
For sideway DIN-rail mounting, the removed aluminum brackets and the black plastic slider need to be
mounted on the1606-XLA-S44 SER B steel bracket.
The order number 1606-XLA-S44 SER B contains one bracket and four screws, which are needed for
sideways DIN-rail mounting.
Intended Use
This mechanical accessory is designed for DIN-rail devices. Check the product datasheet of the DIN-rail
device to confirm that it is suitable for the desired device.
Mechanical Dimensions
All dimensions in mm
Technical Data
Size (width x height x depth)
65x145x44mm
Weight
160g / 0.33lb
Mounting Example – Wall Mounting
Mounting Example – DIN-Rail Mounting
Installation Instructions
1) Detach the two aluminium brackets by removing the four screws with a Torx screwdriver (Torx 10). Save the screws for step 3.
2) Remove the plastic lock mechanism by using a flat-blade screwdriver to move the lock downwards while at the same time push the plastic slide upwards. Detach the plastic slide.
3) Mount the steel brackets with the same screws from the DIN-Rail brackets using caution not to over-tighten the screws! Recommended tightening torque is 0.6Nm. (5.3lb.in).
Preparation for DIN-Rail mounting
Install the two aluminium brackets and the plastic slide (detached from the unit before) onto the side mounting plant with the additional screws provided.
Installation Instructions
Drawing shows a similar unit
Rockwell Automation Support
For Technical Support, visit ROK.AUTO/SUPPORT.
The information in this document is believed to be accurate and reliable and may change without notice.
Rockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec.
Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their companies.
www.rockwellautomation.com
Power, Control and Information Solution Headquarters
Americas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax. (1) 414.382.4444
Europe/Middle East/Africa: Rockwell Automation NV, Pegasus Park, De Kleetlaan 12a, 1831 Diegem, Belgien, Tel: (32) 2663.0600, Fax (32) 2663.0640
Asia Pacific: Rockwell Automation,Level 14, Core F, Cyberport 3, 100 Cyberport Road, Hong Kong, Tel: (852) 2887.4778, Fax (852) 2508.1846
Turkey: Rockwell Otomasyon Ticraet A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, Istanbul, Tel: (90) 216.5698400 (EEE Yönetmeliğine Uygundur)
Publication 1606-IN075A-EN-E - June 2020
DIR 10005222006 (Version 01)
Copyright © 2020 Rockwell Automation, Inc. All Rights Reserved..
">
