Allen-Bradley 1606-XLE120EL Power Supply Installation Instructions

Allen-Bradley 1606-XLE120EL Power Supply is a single-phase DIN-rail mountable power supply designed for commercial applications, such as industrial control, process control, and monitoring. It offers a stabilized and galvanically isolated SELV/PELV output voltage, suitable for use in equipment where malfunction may not cause severe personal injury or threaten human life. The device is equipped with features such as overload protection, short circuit protection, and an over-temperature shutdown. The device can be paralleled or connected in series for increased output power or voltage.

PDF Download
Document
Allen-Bradley 1606-XLE120EL Power Supply Installation Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • DIN-rail mountable
  • Single-phase input
  • Stabilized SELV/PELV output
  • Overload protection
  • Short circuit protection
  • Over-temperature shutdown
  • Paralleling capability
  • Series connection capability

Frequently asked questions

The nominal output voltage is DC 24V, with an adjustment range of 24-28Vdc. The factory setting is 24.1V.

The output current depends on the ambient temperature. At 25°C, it can provide 6.0 - 5.1A, while at 60°C, it can provide 5.0 - 4.3A. At 70°C, it can provide 3.8 - 3.2A. The output current derates linearly between +45°C and +70°C.

Yes, you can connect multiple devices in parallel or series. For parallel connection, ensure the ambient temperature does not exceed 40°C and adjust the output voltage of each device to the same value (±100mV). For series connection, the total output voltage should not exceed 150Vdc.
Preparing document for printing…
0%