Installation Instructions
Original Instructions
Vertical Swivel Dovetail Mounting Bracket
Catalog Number 60-BCLR-MD
IMPORTANT
Figure 2 - Adjustment Range Using the Mounting Bracket
Save these instructions for future use.
Description
40
Catalog number 60-BCLR-MD is a zinc die-cast mounting bracket that
is designed for the installation of the Bulletin 46CLR sensor on 12 mm
(0.47 in.) diameter mounting rods or 10 x 10 mm (0.39 x 0.39 in.)
mounting profile.
0
40
Installation
To install the 60-BCLR-MD mounting bracket, you must perform these
steps:
1.
Mount the 60-BCLR-MD to a mounting bar or rectangular
mounting base.
2.
Secure the bracket to the back of the sensor.
Figure 3 - Securing Bracket with a Screw
Figure 1 - Dovetail Mount
31 (1.22)
16.2 (0.64)
Ø 32 (1.25)
Figure 4 - 60-BCLR-MD Mounting Bracket Dimensions [mm (in.)]
31 (1.22)
Ø 12 (0.47)
3.
Align the sensor as needed for your application.
4.
Once adjustment is complete, secure the sensor and the
mounting bracket wit a single M4 screw using one M3 nut.
Ø 32 (1.25)
40
0
Ø 3 (0.12)
40
Ø 4.3 (0.17)
Rockwell Automation Support
Use the following resources to access support information.
Technical Support Center
Knowledgebase Articles, How-to Videos, FAQs, Chat, User
Forums, and Product Notification Updates.
https://rockwellautomation.custhelp.com/
Local Technical Support Phone Numbers
Locate the phone number for your country.
http://www.rockwellautomation.com/global/support/get-support-now.page
Direct Dial Codes
Find the Direct Dial Code for your product. Use the code to
route your call directly to a technical support engineer.
http://www.rockwellautomation.com/global/support/direct-dial.page
Literature Library
Installation Instructions, Manuals, Brochures, and
Technical Data.
http://www.rockwellautomation.com/global/literature-library/overview.page
Product Compatibility and Download
Center (PCDC)
Get help determining how products interact, check
features and capabilities, and find associated firmware.
http://www.rockwellautomation.com/global/support/pcdc.page
Documentation Feedback
Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this document, complete the
How Are We Doing? form at http://literature.rockwellautomation.com/idc/groups/literature/documents/du/ra-du002_-en-e.pdf.
Waste Electrical and Electronic Equipment (WEEE)
At the end of life, this equipment should be collected separately
from any unsorted municipal waste.
Rockwell Automation maintains current product environmental information on its website at http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page.
Allen-Bradley, Rockwell Automation, and Rockwell Software are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400
Publication 46CLR-IN002A-EN-P - August 2019
Supersedes Publication xxxx-INxxxx-EN-P - Month Year
068-14937
10004809135 Ver 00
Copyright © 2019 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
">
