Allen-Bradley Positive Air-pressure Kit Installation Instructions
Allen-Bradley Positive Air-pressure Kit is designed to help reduce the risk of liquids or dust entering the motor interior during operation. It connects to the motor's interior with a single fitting, allowing you to pressurize the motor using a positive-pressure air supply line. By maintaining positive pressure inside the motor, the kit helps prevent contaminants from being pulled in through the seals due to changes in motor temperature.
Advertisement
Advertisement
Advertisement
Key features
- Single fitting installation
- Reduces dust/liquid ingress
- Positive air pressure
- Easy installation
- Improves motor performance
- Protects against contamination
Frequently asked questions
The kit pressurizes the motor interior to help prevent dust or liquids from entering through seals during operation.
Follow the steps outlined in the installation instructions. Ensure the motor is powered off before beginning the installation process.
The kit requires 4 mm OD Teflon FEP tubing. This tubing is not included with the kit and must be purchased separately.
The maximum air pressure allowed is 0.1 bar (1.45 psi). Exceeding this pressure can damage the motor.