Installation Instructions
Original Instructions
GuardLink Passive Tap
Catalog Number 440S-PF5D
IMPORTANT
Mounting Information
Electronic equipment. Handle with care, do not drop.
Do not over torque the mounting hardware. Recommended fastener
size -M5.
Dimensions
Mounting Hardware Torque Specification
Figure 1 - [mm (in.)]
2.20 N•m (19.95 in•lb)
57 (2.24)
Connector Torque Specification
5.4 (0.21) Ø
Input
Finger tighten the cordset connections and then tighten an additional
1/4…1/2 turn using pliers.
Device Connection
Table 1 - J1 — 4-pin Micro M12 Male (Link In)
M12 x 1 thread
J1
79.64 (3.13)
17
(0.67)
38.5 (1.51)
Pin No.
Wire Color
Function
1
Brown
24V DC
2
White
GuardLink™ Safety
3
Blue
GND
4
Black
Pinouts
2
1
3
GuardLink CLU
4
Figure 2 - Front View
To Device
Table 2 - J2 — 4-pin Micro M12 Female (Link Out)
J3
J2
J2
J1
Link In
Link Out
Pin No.
Wire Color
Function
1
Brown
24V DC
2
White
GuardLink Safety
3
Blue
GND
4
Black
GuardLink CLU
Pinouts
2
1
4
3
GuardLink Passive Tap
Device Connection
Additional Resources
Table 3 - J3 — 5-pin Micro M12 Female
These documents contain additional information concerning related
products from Rockwell Automation.
J3
Pin No.
Wire Color
Function
Pinout
1
Brown
24V DC
2
White
GuardLink Safety In
3
Blue
GND
4
Black
GuardLink Safety Out
5
Gray
GuardLink CLU
2
5
Resource
Description
Guardmaster GuardLink Safety System User
Manual, publication 440R-UM015
Provides guidelines for installing a
Guardmaster GuardLink Safety System.
Industrial Automation Wiring and Grounding
Guidelines, publication 1770-4.1
Provides general guidelines for installing a
Rockwell Automation industrial system.
Product Certifications website,
http://www.rockwellautomation.com/global/
certification/overview.page
Provides declarations of conformity,
certificates, and other certification details.
1
4
3
Optional Mounting Bracket
Figure 3 - Catalog Number 440S-GLTAPBRK1 Dimensions [mm (in.)]
You can view or download publications at http://
www.rockwellautomation.com/global/literature-library/overview.page.
To order paper copies of technical documentation, contact your local
Allen-Bradley distributor or Rockwell Automation sales representative.
Rockwell Automation Support
For technical support, visit
http://www.rockwellautomation.com/support/overview.page.
6 x 5.4 (0.21) Ø for M5 screws
(11 (0.43) Ø screw head, max)
38.5
(1.51)
22
(0.87)
20
(0.79)
76.6 (3.01)
25
(0.98)
11
(0.43)
Waste Electrical and Electronic Equipment (WEEE)
At the end of life, this equipment should be collected separately
from any unsorted municipal waste.
19.6
(0.77)
Rockwell Automation maintains current product environmental information on its website at
http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page.
Allen-Bradley, GuardLink, Guardmaster, Rockwell Automation, and Rockwell Software are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400
Publication 440S-IN008A-EN-P - January 2018
PN-454637
10003238448 Ver 00
Copyright © 2018 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
">