Installation Instructions
Original Instructions
Mounting Brackets
Catalog Numbers 60-BKD-PD
Description
Dimensions [mm (in.)]
Catalog number 60-BKD-PD is a plastic dovetail bracket that allows
fine adjustment of the mounting angle for a Bulletin 42KD miniature
photoelectric sensor of up to 10°.
20.6
(0.81)
Installation
To install the 60-BKD-PD bracket you must perform these three steps:
1. Lock the two clamp jaws of the mounting component with the
round side in the dovetail guide on the back of the housing.
15
(0.59)
15
(0.59)
9.6
(0.377)
20.6
(0.81)
3.3
(0.13) Ø
2. Align as needed.
±10°
3. After adjusting the sensor to the desired position, secure the
mounting bracket with the two M3 screws and washers.
3.3
(0.13) Ø
8.2
(0.32)
9.5
(0.374)
6.8
(0.27)
8.2
(0.32)
Rockwell Automation Support
Use the following resources to access support information.
Technical Support Center
Knowledgebase Articles, How-to Videos, FAQs, Chat, User
Forums, and Product Notification Updates.
https://rockwellautomation.custhelp.com/
Local Technical Support Phone Numbers
Locate the phone number for your country.
http://www.rockwellautomation.com/global/support/get-support-now.page
Direct Dial Codes
Find the Direct Dial Code for your product. Use the code to
route your call directly to a technical support engineer.
http://www.rockwellautomation.com/global/support/direct-dial.page
Literature Library
Installation Instructions, Manuals, Brochures, and
Technical Data.
http://www.rockwellautomation.com/global/literature-library/overview.page
Product Compatibility and Download
Center (PCDC)
Get help determining how products interact, check
features and capabilities, and find associated firmware.
http://www.rockwellautomation.com/global/support/pcdc.page
Documentation Feedback
Your comments will help us serve your documentation needs better. If you have any suggestions on how to improve this document, complete the
How Are We Doing? form at http://literature.rockwellautomation.com/idc/groups/literature/documents/du/ra-du002_-en-e.pdf.
Waste Electrical and Electronic Equipment (WEEE)
At the end of life, this equipment should be collected separately
from any unsorted municipal waste.
Rockwell Automation maintains current product environmental information on its website at
http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page.
Allen-Bradley, Rockwell Automation, and Rockwell Software are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400
Publication 42KD-IN002A-EN-P - October 2018
Supersedes Publication xxxx-INxxxx-EN-P - Month Year
068-14861
10004156557 Ver 00
Copyright © 2018 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
">