Allen-Bradley Small Flange Handle Installation Instructions
Allen-Bradley Small Flange Handle is a component designed for use with circuit breakers in various enclosures. This handle provides a secure and reliable method for operating the circuit breaker, allowing for easy on/off control. It is compatible with 140G circuit breakers, offering a user-friendly interface for switching electrical circuits.
Advertisement
Advertisement
Advertisement
Key features
- Small Flange Design
- Compatible with 140G Circuit Breakers
- Secure and Reliable Operation
- Easy On/Off Control
- Various Enclosure Compatibility (Type 1, 3R, 4, 4X, 12)
Frequently asked questions
The Small Flange Handle is designed specifically for use with 140G circuit breakers.
This handle is compatible with circuit breakers in Type 1, 3R, 4, 4X, and 12 enclosures.
Refer to the installation instructions for a complete list of tools, including a 7/16” wrench, #2 Phillips screwdriver, and a torque wrench.
The manual recommends tightening the nuts to a specified torque of 30-40 lb-in.
Do not attempt to repair a malfunctioning handle. Contact the manufacturer for repair services.