Allen-Bradley 1585BP Bulkhead Coupler Installation Instructions

The Allen-Bradley 1585BP Bulkhead Coupler is a robust connector designed for telecommunication applications. It is equipped with a dust cap for protection and features a sturdy construction for reliable performance. The coupler can be used in various installations, both in industrial and commercial settings. It's compatible with panel thicknesses ranging from 0.035 to 0.120 inches, making it a versatile option for many applications.

PDF Download

Document

Installation Instructions
Bulletin 1585BP Bulkhead Coupler
IMPORTANT: SAVE THESE INSTRUCTIONS FOR FUTURE USE.
Refer to the product catalog pages for additional information.
Panel Thickness
0.89…3 mm (0.035…0.120 in.)
with Dust Cap, Max Thickness:
1.83 mm (0.072 in.))
1
2
3
Tighten lock out.
Place gasket end on connector
against panel.
4A
5A
2.26 N•m
(20 lbs)
1
Optional Dust Cap
If dust cap is used, put the lanyard cap on connector
and use second lock out and tighten to torque valve.
4B
5B
ATTENTION: To assist safe installation, comply
with the following:
A. Use caution when installing or modifying
telecommunications circuits.
B. Never touch uninsulated wire terminals
unless the circuit has been disconnected.
C. Never install this device in a wet location.
D. Never install wiring during a lightning storm.
10000029983 Ver 00
January 27, 2009
Printed in USA
2
">

Hello! I am an AI chatbot specifically trained to assist you with the Allen-Bradley 1585BP Bulkhead Coupler Installation Instructions. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant terminated