Allen-Bradley 509 Size 00 Enclosure Cover Installation Instructions

1
2
A
3
4
5
6
7
8
Enclosure Cover Replacement
(Cat 509-TA_)
ATTENTION: To prevent electrical shock, disconnect from power source before installing or servicing.
The enclosure cover is provided with the reset button assembled for the Eutectic or SMP overload relays,
Bulletin 592-JOV16 or 592-A_ _ T for the E1-Plus overload relay, Bulletin 592-EE_T, the following
modifications must be made:
1. Remove the large nut that secures the reset assembly to the cover.
B
2. Remove the reset assembly.
3. Add the two plastic rings provided in the plastic bag then the blue reset label with the text toward the plastic
rings.
4. Install the reset assembly into the cover and torque the large nut to to 30 lb.-in.
5. Check for proper reset button travel by manually tripping the overload relay, then install the cover and push the
reset button. remove the cover and check that the overload relay is reset.
C
D
E
42052-141-01 (1)
Printed in U.S.A.
G
-01
1
PART CHG.
NO. CHAR.
ONE SIDE PRINTED
BODY STOCK WHITE
BODY INK BLACK
8-1/2" W x 11" H
MATERIAL
SIZE
REFERENCE
REVISION
AUTHORIZATION
1
1017943
DIMENSIONS APPLY BEFORE
SURFACE TREATMENT
THIS DRAWING IS THE PROPERTY OF
ROCKWELL AUTOMATION, INC.
OR ITS SUBSIDIARIES AND MAY NOT BE COPIED,
USED OR DISCLOSED FOR ANY PURPOSE
EXCEPT AS AUTHORIZED IN WRITING BY
ROCKWELL AUTOMATION, INC.
(DIMENSIONS IN INCHES)
TOLERANCES UNLESS
OTHERWISE SPECIFIED
.XX:
N/A
.XXX:
N/A
H
LOCATION: MILWAUKEE, WISCONSIN U.S.A.
G. Ushakow
CHKD. M. Jutz
APPD. C. Sauers
DR.
ANGLES:
41053
N/A
E - DOC
ENCLOSURE COVER REPLACEMENT
INSTRUCTION SHEET
DATE
DATE
DATE
12-15-05
12-15-05
12-15-05
DWG.
SIZE
B
SHEET
1
OF
1
42052-141
B-vertical.ai
">