Allen-Bradley 599 Accessory Kit Installation Instructions

The Allen-Bradley 599 Accessory Kit is a versatile component designed to enhance the functionality of Allen-Bradley starters. This kit offers various options for customizing your starter setup with push button switches, selector switches, and pilot lights. These accessories allow for easy control and monitoring of your starter system, enabling you to adapt to specific requirements and build a safe and reliable solution.

PDF Download
Document
Allen-Bradley 599 Accessory Kit Installation Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Push Button Switches
  • Selector Switches
  • Pilot Lights
  • Easy Installation
  • Starter Customization
  • Safe and Reliable
  • 3-Phase/Single-Phase
  • Shallow/Deep Cover
  • Clearance for Mounting Hardware

Frequently asked questions

Refer to the installation instructions for your specific accessory kit. Ensure wire leads approach from the side to maintain electrical clearance. Connect the switch terminals to the appropriate starter terminals according to the diagram in the manual. Tighten mounting screws to the specified torque.

The mounting screws require a torque of 12 lb-in for the Push Button Switch Kit and 20 lb-in for the Pilot Light Kit.

The Spacer - Shallow Cover and Spacer - Deep Cover are used for different cover depths. The Shallow Cover spacer is used for single-phase starters, while the Deep Cover spacer is used for 3-phase starters.
Preparing document for printing…
0%