Allen-Bradley LiquiFlo 2.0 Frame 4 Board Interface Assembly Installation Instructions

The Allen-Bradley LiquiFlo 2.0 Frame 4 Board Interface Assembly is a crucial component for managing and controlling liquid flow in industrial applications. It integrates seamlessly with the LiquiFlo 2.0 system, providing a reliable interface for data communication and control signals. The assembly incorporates a front cover, control panel, flex film cable connectors, combined I/O PCB, combined control PCB, and a combined power PCB. This robust design ensures optimal performance and durability in demanding environments.

PDF Download
Document
LiquiFlo 2.0 Frame 4 Board Interface Assembly Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Front Cover
  • Control Panel
  • Flex Film Cable Connectors
  • Combined I/O PCB
  • Combined Control PCB
  • Combined Power PCB

Frequently asked questions

To remove the front cover, first remove and save the 10 M5 screws. Then, you can proceed to remove the front cover itself.

The flex film cable connectors are connected to the combined control PCB. It is important to disconnect them before removing the control panel.

The recommended torque specification for installing the combined power PCB is .6 to .7 N-m (5 to 6 in-lb).
Preparing document for printing…
0%