Installation Instructions
Display Module Cable
Part Number W40863-850-01
to be used with Catalog Number 1404-DM
Wiring of Display Module
The Master Module powers the Display Module. See Figure 1 for
wiring connections.
Use supplied Allen-Bradley Replacement Display Module cable Part #
W40863-850-01 or equivalent category 5, shielded, with 4 twisted-pair,
straight-through (not crossed).
Recommended maximum cable length: 3m (10 ft).
Figure 1 Wiring Display Module to Master Module
Powermonitor 3000
Part Number
W40863-850-01
1
Publication 1404-IN009A-EN-P - November 2004
Rockwell Automation Support
Rockwell Automation provides technical information on the web to assist you in using its products. At
http://support.rockwellautomation.com, you can find technical manuals, a knowledge base of FAQs, technical and
application notes, sample code and links to software service packs, and a MySupport feature that you can customize
to make the best use of these tools.
For an additional level of technical phone support for installation, configuration and troubleshooting, we offer
TechConnect Support programs. For more information, contact your local distributor or Rockwell Automation
representative, or visit http://support.rockwellautomation.com.
Installation Assistance
If you experience a problem with a hardware module within the first 24 hours of installation, please review the
information that's contained in this manual. You can also contact a special Customer Support number for initial help
in getting your module up and running:
United States
1.440.646.3223 (for failures within the first 24 hours of installation)
1.440.646.5800 (for installation assistance)
Monday – Friday, 8am – 5pm EST
Outside United States
Please contact your local Rockwell Automation representative for any technical support issues.
New Product Satisfaction Return
Rockwell tests all of its products to ensure that they are fully operational when shipped from the manufacturing
facility. However, if your product is not functioning and needs to be returned:
United States
Contact your distributor. You must provide a Customer Support case number (see phone number
above to obtain one) to your distributor in order to complete the return process.
Outside United States
Please contact your local Rockwell Automation representative for return procedure.
Publication 1404-IN009A-EN-P - November 2004 2
Supersedes Publication XXXX-X.X.X - Month Year
PN 40055-225-01(1)
Copyright © 2004 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
">
