5455 ProxPro II
PHYSICAL ACCESS SOLUTIONS
ProxPro® II Reader
NEW GENERATION PROXIMITY CARD READER
HID’s ProxPro® II proximity reader for access control combines performance,
reliability, and ease of installation into a two-piece, weatherproof potted
enclosure. International users will appreciate the multilingual installation
manual, lower voltage requirement and flexible mounting options.
Compare features of the ProxPro II to the original ProxPro reader (still available):
FEATURE
ADDITIONAL PRODUCT FEATURES:
ƒƒ
Two-piece reader design allows for easy
installation.
ƒƒ
Available with a Wiegand or Clock-andData interface.
ƒƒ
ƒƒ
Provides high reliability, consistent read
range and low power consumption.
Features include multicolor LED and
internal or host control of the LED and
beeper.
ƒƒ
Mounts directly on metal with minimal
impact on the read range performance.
ƒƒ
Optional kit enables mounting behind
glass.
ProxPro
ProxPro II
Multilingual Installation Manual
No
Yes
Glass Mounting Kit
Yes
Yes
12V and 24V
5V and 12V
Supply Voltage
Voltage Range (min/max)
10 / 28.5 VDC
5 / 16 VDC
Current Draw (Avg/Peak)
100 / 120 mA
25 / 125 mA
Read Range at 12 VDC
(Proxcard® II / ISOProx® II)
8" (20 cm) / 7" (17 cm)
9" (22 cm) / 8" (20 cm)
IP55
IP55
IP Rating
European / Asian
Mounting Holes
No
Yes (Vertical)
Weatherproofing Method
Rubber O-ring
Fully potted electronics
Cover Installation Method
4 screws, then snap in bezel
Snap-on cover
No
Available (one-time tooling
charge)
Custom Molded Logo
Termination Method
Screw Terminals
Wire pigtail
Metal Compensation
Jumper
No, but provides equivalent
performance on metal
LED / Beeper Configuration
Custom Firmaware
Tamper Switch
Keypad Version Available
Wiegand Pullup Select 5 or 12V
Serial Version Available
hidglobal.com
DIP Switch or Command Card
Command Card
Socketed Processor, Change
Part
Order from factory
Yes
No, but electronics
are potted to prevent
tampering
Yes
No
DIP Switch
No
Yes
No
FEATURES
operation. An additional external loop-back test allows for the reader
outputs and inputs to be verified without the use of additional test
equipment.
ƒƒ
Security – Recognizes card formats up to 84 bits, with over
1.93x1025 unique codes.
ƒƒ
Installation – Easy, streamlined installation procedure is consistent
with HID’s ThinLine® II, MiniProx® and ProxPoint® Plus readers.
Included installation manual features instructions in English,
French, German, Spanish, Portuguese, Chinese and Japanese.
ƒƒ
Audiovisual Indication – When a proximity card is presented to
the reader, the red LED flashes green and the beeper sounds. The
multicolor LED and beeper can also be controlled individually by
the host system.
ƒƒ
Diagnostics – On reader power-up, an internal self-test routine
checks and verifies the setup configuration, determines the internal
or external control of the LED and beeper, and initializes reader
ƒƒ
Indoor/outdoor Design – Sealed in a rugged, weatherized
polycarbonate enclosure designed to withstand harsh environments,
providing reliable performance and a high degree of vandal
resistance. Two-piece reader design allows for easy installation.
ƒƒ
Easily Interfaced - Wiegand output model interfaces with all existing
Wiegand protocol access control systems. Clock-and-Data (magnetic
stripe) model interfaces with most systems that accept magnetic
stripe readers.
ƒƒ
Options – Termination: 18” (45 cm) pigtail standard, 9’ (2.7m)
available by special order. Mounting: glass mounting kit available
separately. LED and beeper operation.
SPECIFICATIONS
*Model Name
ProxPro®
Model Number
5455 Wiegand
5458 Clock-and-Data interface
**Read Range
ProxCard® II card - up to 9” (22 cm)
ISOProx® II card - up to 8” (20 cm)
DuoProx® II card - up to 8” (20 cm)
Smart ISOProx® card - up to 8” (20 cm)
Smart DuoProx® card - up to 8” (20 cm)
HID Proximity and MIFARE® card - up to 8” (20 cm)
ProxCard® Plus card - up to 4” (10 cm)
ProxKey® II key fob - up to 4” (10 cm)
MicroProx® Tag - up to 4” (11 cm)
Mounting
Color
Mounts on a single-gang electrical box for easy installation. Mounting holes are
provided for European and Asian J-boxes. Mounts directly on metal with minimal
impact on read range performance. An optional kit enables mounting behind glass.
White, Beige, Charcoal Gray or Black
Keypad
Dimensions
Power Supply
Power
Requirements
(Standard
Power)
Operating
Temperature
No
5.0” x 5.0” x 1.0”
(12.7 x 12.7 x 2.54 cm)
5-16 VDC
Linear power supplies are recommended.
Average: 25 mA at 12 VDC
Peak: 125 mA at 12 VDC
-22° to 150° F (-30° to 65° C)
Operating
Humidity
0-95% relative humidity noncondensing
Transmit
Frequency
125 kHz
Environmental
IP55
Cable Distance
Wiegand interface: 500 feet (150 m)
Clock-and-Data interface: 50 feet (15 m)
Recommended cable is ALPHA 1295 (22 AWG) 5 conductor minimum stranded with
overall shield or equivalent. Additional conductors may be required for LED or beeper
control.
Certifications
Housing Material
UL294/cUL (US), FCC Certification (US), IC (Canada), CE (EU), C-tick (Australia,
New Zealand),
SRRC (China), MIC (Korea), NCC (Taiwan), MIC (Japan), iDA (Singapore), RoHS
UL94 Polycarbonate
Warranty
Lifetime
*Consult How to Order Guide for specific ordering instructions.
**Dependent upon installation conditions
North America: +1 949 732 2000
Toll Free: 1 800 237 7769
Europe, Middle East, Africa: +44 1440 714 850
Asia Pacific: +852 3160 9800
Latin America: +52 55 5081 1650
hid g l o b al.com
© 2011 HID Global Corporation. All rights reserved. HID and the HID logo are trademarks or registered trademarks of HID Global in the U.S.
and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their
respective owners.
2011-11-11-prox-proxpro-ii-reader-ds-en
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising