SCREWFIX SM0154 Highlife Bathrooms Push Button Basin Tap Installation Guide

The screwfix SM0154 is a push-button basin tap. It features a simple push-button operation for convenient water flow control. The flow rate is 0.14L/S at 2 Bar pressure, with a cut-off time adjustable between 4 and 13 seconds at 2 Bar. The tap operates within a pressure range of 0.3 to 6 Bar (recommended 0.5 Bar) and a maximum temperature of 60 degrees Celsius. Regular maintenance is simple, involving cleaning the O-ring and rubber washer.

PDF

Document

Installation and Maintenance instruction
Cover
Handle
Technical Information:
Flow Rate: 0.14L/S in 10 Sec /2 Bar
Max. Working Pressure: 6 Bar
Min .Working Pressure: 0.3 Bar
(Recommended working pressure 0.5bar).
Cut Off Time : 4-13 Sec / 2Bar
Max Working Temperature: 60 degrees Celcius between Max.
and Min. working pressure.
Tap body
Basin
Note: Following the steps to adjust shut off time.
Turn timer anti-clockwise to reduce the
2
1
water flow time. Turn timer clockwise to
Rubber washer
increase water flow time.
Adjust time between 6s-9s.
Screwdriver
Take out the cover
Adjusting Timer
Plastic nut
Follow the steps below for regular cleaning or maintenance !
Timer
1
Use wrench to screw
out the valve
2
Take out barrel
3
To adjust timer to approx
6-9seconds.
4
Press cover
3
φ24.2*φ1.1 O ring
Test the Push button,
it should automatically Pop-up.
Use water to wash the O ring.
Check and clean the rubber washer
">

Hello! I am an AI chatbot specifically trained to assist you with the screwfix SM0154 Installation Guide. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts