Foiresoft Motor Basic Motorized Zebra Roller Light Filtering Blinds User Guide

USER GIUDE
MOTORIZED
ZEBRA
ROLLER
BLINDS
TABLE OF
CONTENTS
PRODUCT WARRANTY
INCLUDED COMPONENT
HOW TO MEASURE
OTHER REFERENCES
��
��
��
��
PRODUCT
WARRANTY
Foiresoft provide a limited warranty service for 6 months after the date
of purchase. Not only blinds but also the motor and remote controller.
The support we provide under the limited warranty is only available for
manufacturing defects (i.e, material defects, workmanship that cause
product failure to operate).
What is covered?
Wrong Type, Color, and Size Package Damaged
Missing Accessories for blinds (e.g. Side cover for top header & bottom bar, installation parts)
All internal mechanisms
Repairs and/or replacements will be provided with the closest equivalent of the product
NOTE : For the issues mentioned above (wrong type, color, size, damage / defective
product, Malfunction), The issue needs to be accurately identified therefore order
number, product size, and pictures or videos must be provided for the part where the
issue occurred.
What is NOT covered?
Normal wear and tear
Any failure that caused by :
Abuse
Accidents
Misuse
Alterations
Defectives that was caused
by passing of time :
Discoloration
Fading
Shrinking
Stretching
Failure to follow our
instructions regarding :
Measurement
Installation
Cut or bend the Antenna
Cleaning
Maintenance
USB c type Charger Cable :
Cable is offered as a complimentary component.
Please use own charger cable or buy a new one
if the offered cable is not operating.
Charging-related :
Lithium-ion battery coin cell
(e.g. Ran out of battery, replacement, Misuse, etc.)
If charging is done incorrectly (using a high-voltage charger, etc.).
01
GETTING STARTED
1 INCLUDED COMPONENTS
L- bracket x 2 EA
C-clamp x 2 EA
Dry anchor & screw x 2 EA
Screw x 3 EA
★ The amount of included components might differ depending
on the size of the shades.
Blind Shade
Remote controller X 1 EA
Charging cable X 1 EA
★ Order with below 6 units of motorized blind will include one remote control and one cable.
★ Cable is offered as a complimentary component. The cable is not covered by warranty.
2 TOOLS YOU MAY NEED
Tape Measure
(NOT INCLUDED)
Screwdriver
Drill
02
HOW TO MEASURE
INSIDE MOUNT VS OUTSIDE MOUNT
Please decide on your mounting type before proceeding to measure your window size.
INSIDE MOUNT
OUTSIDE MOUNT
Shade fits within window opening.
Shade mounts outside window opening.
Gives a cleaner minimalist look to you
Covers your window more so iti
rwindow
ncreases light control and privacy.
Take up less space.
Allows more space for windows with
Great for windows with beautiful trim.
cranks or handles
ABOUT WINDOW DEPTH
In order to install your blinds for INSIDE MOUNT, we recommend buyer to have at least 3.3 inch depth.
If the depth is less than 3.3 inch, the blind's header might protrude from the window frame.
ABOUT C-CLAMP & L-BRACKET DIMENSION
The C-Clamp space that are available for installation is around 1.8 inch.
Total size of installation (from the L-bracket to the most outer side of the header) will be 3.8~4.2 inch.
96.5~106.6mm (3.8~4.2 inch)
80mm
(3.1 in
ch)
(1.8 in
ch)
46mm
03
HOW TO MEASURE
INSIDE MOUNT
NOTICE
Do not reduce the width size for fear of too tight fit when ordering the product.
Please consider that the blinds fully cover your window even if the final size width is reduced about
0.1 ~ 0.3 inches from your selected size.
For 1 window
When installing 1 blind:
Width:
➀
(H)
Measure ➀.
Height :
Measure (H).
For 2 windows
When installing 1 blind:
Width:
Measure ➂.
Height :
➀
(H)
Measure (H).
➁
➂
When installing 2 blind:
Width:
Measure ➀ for the left one,
Measure ➁ for the right one.
Height :
Measure (H).
For 3 or more windows
➁
When installing 3 blind:
➂
(H)
➀
Width:
Measure ➀ for the left one,
Measure ➁ for the center one,
Measure ➂ for the right one.
Height :
Measure (H).
04
HOW TO MEASURE
OUTSIDE MOUNT
2 inch
For 1 window
When installing 1 blind:
Width:
Measure ➀ and plus 4 inch..
Height :
Measure (H) and plus 4 inch.
2 inch
2 inch
(50mm)
2 inch
(50mm)
2 inch
For 2 windows
When installing 1 blind:
Width:
Measure ➂ and plus 4 inch.
Height :
Measure (H) and plus 4 inch.
When installing 2 blind:
2 inch
Width:
Measure ➀ and add 2 inch for the left one,
Measure ➁ and add 2 inch for the right one.
Height :
2 inch
(50mm)
Measure (H) and plus 4 inch.
2 inch
(50mm)
For 3 or more windows
2 inch
When installing 3 blind:
Width:
Measure ➀ and plus 2 inch for the left one,
Measure ➁ for the center one,
Measure ➂ and plus 2 inch for the right one.
2 inch
Height :
Measure (H) and plus 4 inch.
2 inch
(50mm)
2 inch
(50mm)
05
OTHER
REFERENCES
How to measure inside mount video guidelines
[ Amazon US ]
https://www.amazon.com/vdp/0494ffecfb2b420fa99a58afa0250e81?
[ Amazon CA ]
https://www.amazon.ca/vdp/0ba807b3b7bd474286bfc5133f1fbab0
How to measure outside mount video guidelines
[ Amazon US ]
https://www.amazon.com/vdp/013b2c01b14a451895e7579501db95b8?
[ Amazon CA ]
https://www.amazon.ca/vdp/0868eaf99c05419f8c6801e4eec2be82
CONTACT INFORMATION
Foiresoft Customer Service :
URL : www.amazon.com/hz/help/contact/ASRGLZI3ITAPZ
Email : [email protected]
08
">