Shenzhen IPC209 Smart Outdoor Camera User Manual

420x128MM
Out
DESCRIPTION:
Model: IPC209
camera
Type-C USB cable
Power DC 5V +/- 5%
Status lights:
Blue light solid on: system setup
Blue light blinking fast: waiting for the pairing
Blue light blinking slowly: waiting for the WiFi connection
screw package
Microphone Capture sound for your video
SD Card slot Support local micro SD Card storage (Max. 128GB)
Reset Press and hold the reset button for 5 seconds to reset the camera (if you
have modified the settings, they will return to factory defaults)
Before you start write down your network name & password.
Lens
Status light
Microphone
Lights
PIR Sensor
On/off
SD Card slot
Reset
Note: this item only works on a 2.4GHz Wi-Fi network, not on a 5GHz network.
Please consult your router manual for settings.
Please follow the instructions and make sure the passwords are correctly
inputted.
One device can only be paired with one App account at a time, if the device has
already been paired with another account, then it can’t be paired to another
account.
The device can be removed from the app account by being deleted from the app.
The device will be reset automatically once the blue light changes to a solid on.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be
installed and operated with minimum 20cm distance between the radiator and your body:
Use only the supplied antenna.
">