SIEMENS Topper Group Operated Air Break Switches Instruction manual

Siemens Topper Group Operated Air Break Switches are high-voltage switches designed for group operation, available in 600A and 900A capacities. They are factory-adjusted for ease of installation and feature robust construction for reliable performance in demanding environments. This manual covers installation, operation, maintenance, and safety procedures.

PDF Download
Document
Siemens Topper Group Operated Air Break Switches Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Group operation
  • 600A & 900A capacities
  • Factory-adjusted
  • High-voltage switching
  • Safety interlocks
  • Detailed instructions

Frequently asked questions

Refer to Section C of the viewed document for the detailed operating handle adjustment procedure, focusing on ensuring it's impossible to place the handle in the closed slot unless the switch blades are fully closed.

Always de-energize and ground the equipment before performing any maintenance, as stated in the viewed document. Only qualified personnel should handle maintenance.

Section D of the viewed document details the operational check-out including checking blade rotation, interrupter insertion, and verifying proper operation of switches and interrupters on all three phases. Manual checks are required.

According to the viewed document, these screws help ensure the vertical pipe rotates with the handle when the switch is opened or closed. They should be tightened until the shoulder is firmly seated against the pipe.

The viewed document suggests that the switch consists of recyclable materials. Refer to the section on disposal for details on handling metals, plastics, electronics, and batteries for proper recycling. Local regulations may apply.
Preparing document for printing…
0%