Cooper Hunter RG10A-F2S-H2S-G2S-K2S-BGEF Remote Controller Owner’s Manual

Cooper Hunter RG10A-F2S-H2S-G2S-K2S-BGEF is a remote controller for air conditioning units. It offers various operating modes (Auto, Cool, Dry, Heat, Fan), temperature control (60-86°F / 16-30°C), adjustable fan speeds, timer functions (on/off), and features like Swing (horizontal and vertical louver movement), Turbo mode for faster cooling, and an ECO/GEAR mode for energy efficiency. The remote also includes a Sleep function and a Clean function (model dependent). Consult the full manual for detailed instructions.

PDF Download
Document
Cooper Hunter RG10A Remote Controller Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Multiple operating modes
  • Precise temperature control
  • Adjustable fan speeds
  • Timer functions
  • Swing function (horizontal & vertical)
  • ECO/GEAR energy saving mode
  • Turbo mode
  • Sleep mode
  • Self-Clean function

Frequently asked questions

Use the TEMP+ or TEMP- buttons to increase or decrease the temperature in 1° increments. The maximum temperature is 86°F (30°C), and the minimum is 60°F (16°C).

The remote offers Auto, Cool, Dry, Heat, and Fan modes. Note that Heat mode may not be available on all models.

Press the TIMER button to select either TIMER ON or TIMER OFF. Then, use the TEMP+ or TEMP- buttons to set the desired time. Press OK to confirm.

Press the SWING button to start and stop the horizontal louver movement. Hold the button for 2 seconds to activate the vertical louver auto-swing.

This button cycles through energy-saving modes, reducing energy consumption. The exact modes and their effects are described in the advanced functions section of the manual.
Preparing document for printing…
0%