COMET S0110E Datalogger Owner’s Manual

Datalogger - thermometer with display
code: S0110E
Temperature datalogger is designed for record of temperature. Values
are stored to a non volatile electronic memory. Data transfer to the
personal computer for further analysis is performed via USB, RS232, GSM
or Ethernet interface by means of a proper adapter.
The device includes Traceable calibration certificate with declared
metrological traceability of etalons is based
on requirements of EN ISO/IEC 17025 standard.
For communication with the PC must be from Optional accessories
ordered USB adapter or COM adapter or start/stop magnet if is needed to
control logging the other way than directly from computer.
Technical data
TEMPERATURE SENSOR
Measuring range
-30 to +70 °C
Accuracy
±0.6 °C (-30 to +30 °C);<br> ±0.8 °C (+30 to +70
°C)
0.1 °C
Resolution
GENERAL TECHNICAL DATA
Operating temperature
-30 to +70 °C
Channels
internal temperature sensor
Memory
32,000 values (non-cyclic record)
Recording interval
adjustable from 10 s to 24 h
Display and alarm refresh
each 10 s
Recording mode
noncyclic - data logging stops after filling the
memory<br>cyclic - after filling memory oldest data is
overwritten by new
year, leap year, month, day, hour, minute, second
Real time clock
Power
lithium battery 3.6 V; size AA
Battery life
6 years
Protection class
IP67
Dimensions
93 x 64 x 29 mm
Weight (including batteries)
approx. 110 g
Warranty
3 years
1/1
Powered by TCPDF (www.tcpdf.org)
">