advertisement
PTDZ770K
PTDZ770LK
1-Chip DLP ™ Projectors
Bright 7,000 lm and Crisp, Vivid Pictures for Various Applications
PT-
DZ770K
PT-
DZ770LK
WUXGA
7,000 lm
Detailed Images and Versatile
Functions in a
Compact Cabinet
Panasonic’s unique optical engine in the PT-DZ770K produces 7,000 lm of brightness and high-quality images.
This combines with a host of terminals and advanced management functions to provide high reliability and hasslefree maintenance. Ideal for a wide variety of applications, from education and business to stage performance.
Vivid Picture Quality with
High Brightness
Bright 7,000 lm from Compact Body
New lamp drive system has helped to make the body as compact as Panasonic’s PT-DZ6700
Series * 2 , while providing high brightness of
7,000 lm.
RGB Booster Significantly Improves Color
Reproduction
The RGB Booster achieves high image quality with levels of color reproduction and brightness that make each color stand out. It combines
Panasonic’s proprietary Vivid Color Control technology with a newly engineered Lamp Modulation
Drive System for a 1-chip DLP ™ projector that produces bright and vivid colors.
• Vivid Color Control
This unique control technology optimizes the use of the color segment areas of the color wheel. It increases the brightness of each RGB color by minimizing the unallocated portions between the colors, to achieve truly vivid coloring.
• Lamp Modulation Drive System
With the advanced lamp modulation technology, the projector is able to control the lamp intensity for each of the red, green, blue, and white segments of the color wheel separately. Because the actual light output is controlled in relation to each color segment, light usage is optimized and color balance is obtained without lowering the brightness. This results in bright vivid images with increased color fidelity.
Detail Clarity Processor Brings Depth and
Clarity to Details
This advanced image-processing circuit analyzes the video signal frequency range for each scene by extracting data on the distribution of high, mid, and low-frequency components, and brings out fine details accordingly. The resulting images have a more natural, three-dimensional appearance with crisp, clear detail.
System Daylight View 2 for Enhanced
Color Perception
Image details are less clear when a projector is used in a room with the lights on. Panasonic’s
System Daylight View 2 improves brightness perception by adjusting sharpness, gamma curves, and color corrections. This produces crisper, more stunning images with vivid colors even under bright conditions
Without System Daylight
View 2
PT-DZ770K with System
Daylight View 2
DICOM Simulation Mode
* 3
This imaging mode is similar to DICOM part 14, which is a medical imaging standard. It reproduces X-ray images with remarkable clarity.
Normal mode
• Conventional system • RGB Booster
Color wheel Color wheel DICOM simulation mode
Lamp power
Because the lamp power was fixed in conventional projectors, color reproduction was enhanced by sacrificing brightness.
Lamp power
By modulating the lamp power, we can maximize the color reproduction of each color without sacrificing brightness. Light usage is optimized, and color balance is obtained without lowering the brightness.
Rec. 709 Mode for HDTV Projection
Optimal color reproduction can be achieved by selecting this mode, compliant with ITU-R Recommendation BT.709, when images from an HDTV source are projected.
PT-DZ770K/DZ770LK 1-Chip DLP ™ Projectors
Easy Maintenance and
Superior Reliability
Eco Filter that Needs No Maintenance for up to 12,000 Hours
* 4
The original Eco Filter consists of two Micro Cut
Filters (electrostatic filters), a pre-filter and a main filter, which use an ion effect to collect extremely small dust particles. The pre-filter has a honeycomb configuration and the main filter is pleated to achieve a large surface area that raises its dust collecting performance. Thanks to these features, the Eco Filter has a replacement cycle of up to 12,000 hours * 4 , which reduces Main filter the hassle of maintenance. And, as an environmental consideration, the filter can be washed with water and reused * 5 .
Pre-filter
Dual-Lamp System Prevents Image
Interruptions
The Dual-Lamp System eliminates the need to interrupt a presentation if a lamp should burn out
(in dual-lamp operation mode). The Lamp Relay mode also operates the lamps alternately to enable 24/7 projector operation. The replacement lamp unit * 6 can be used with all of the Panasonic
PT-DW730 Series * 1 , DZ6700 Series * 2 and
PT-DZ570 Series * 7 projectors. This reduces the number of lamp types that need to be kept in stock when multiple projectors are used.
Liquid Cooling System Attains a High
Level of Reliability
Panasonic’s unique liquid cooling system directly cools the DLP™ chip to improve performance and enable operation up to 45°C (113°F).* 8 This allows use in a wider variety of environments, while stabilizing performance and keeping the unit quiet even in harsh conditions. It also contributes to realizing the com-
Embedded pump
Radiator pact body. Plus,
Panasonic’s liquid cooling system is hermetically sealed, so you don’t need to replenish the liquid.
DLP™ chip Reservoir tank
System Integration Flexibility
Flexible Installation
The wide adjustment range of the powered horizontal/vertical lens shift function assures convenience and versatility during installation. It lets you easily make adjustments
360° with the remote control. The unit can also be rotated 360 degrees vertically. This means you can install it at any angle you want, to accommodate different installation conditions.
A Wide Selection of Optional Lenses
Choose from a wide lineup of optional lenses for your system, including short-throw zoom lens, long-throw zoom and fixed-throw lenses for rear projection use. The additional lenses make it easy to adapt your projector to the installation site.
ET-DLE080
Multi-Screen Support System Seamlessly
Connects Multiple Screens
The Multi-Screen Support System optimally adjusts multiple screens: Edge blending, color matching and multi-screen processor.
• Edge Blending
The edges of adjacent screens can be blended and their luminance controlled.
• Color Matching
This function corrects for slight variations in the color reproduction range of individual projectors.
• Multi-Screen Processor
The PT-DZ770K can project large, multi-screen images without any additional equipment. Up to 100 units (10 × 10) can be edge-blended at a time.
Color matching Edge blending
With edge blending
PT-DZ770K
Source
Without edge blending
Overlapping image edges
Side-by-Side Function
* 9
The PT-DZ770K can simultaneously display images from two sources onto a single screen. For example, you can display a PC image on the left and a video image on the right. Taking advantage of the wide-screen projection, this function gives you a host of new application possibilities to explore.
Multi Projector Monitoring & Control
Software
Panasonic’s original freeware, “Multi Projector
Monitoring & Control Software,” allows the user to control and monitor multiple projectors at the same time via LAN. Projectors can be scheduled to turn on and off at a certain hour everyday.
When a problem occurs, an alarm message is sent to the monitoring/controlling PC.
Crestron RoomView™ and AMX Device
Discovery
The AMX Device
Discovery technology is built in the PT-
DZ770K. Therefore, the LAN terminal allows a computer connected to the network to use Crestron RoomView™ application software to manage and control system devices.
Standby Mode: Eco
* 10
The PT-DZ770K has attained a low standby power level of 0.2 W* 11 (
STANDBY MODE
:
ECO
). It also helps to slash running costs, and reduces environmental impact.
Other Valuable Features
• Multiple terminals with HDMI compatibility
• 3D color management system
• HD IP conversion
• Digital noise reduction
• Dynamic sharpness control
• Web browser control/monitoring and e-mail message alert
• PJLink ™ (Class 1) compatibility
• Scheduling function
• 30m long-range wireless remote control
• Mechanical lens shutter
• Direct Power Off allows unplugging the power cord right after use
Recommended Applications
The PT-DZ770K boasts superior image quality, flexible installation, and easy maintenance, making either model an ideal choice for use in classrooms, auditoriums, houses of worship, museums, and much more.
E c o l o g y - c o n s c i o u s D e s i g n
Panasonic works from every angle to minimize environmental impact in the product design, production and delivery processes, and in the performance of the product during its life cycle. The PT-DZ770K projector reflects the following ecological considerations.
•
•
•
•
•
No halogenated flame retardants are used in the cabinet.
Lead-free solder is used to mount components to the printed circuit boards.
Lamp power switching further reduces power consumption.
11 Standby power consumption of only 0.2 W * has been achieved (
STANDBY MODE
:
ECO
).* 10
Auto Power Save activates standby mode when no signal is input.
The PT-DZ770K is carefully manufactured at the Panasonic factory in Japan, under strict quality control. This is another, very important advantage of a
Panasonic projector.
*1 PT-DW730S/DW730LS/DX800S/DX800LS. *2 PT-DZ6710/
DZ6710L/DZ6700/DZ6700L/DW6300S/DW6300LS/
D6000S/D6000LS/D5000S/D5000LS. *3 This product is not a medical instrument. Do not use it for actual medical diagnosis. *4 The usage environment affects the duration of the filter. *5 When washing with water, please follow the procedures listed in the operating instructions. Also, we recommend replacing the filter with a new one after it has been washed and reused twice. If the filter is not sufficiently clean after washing, replace it with a new one.
*6 ET-LAD60A/LAD60AW. *7 PT-DZ570/DW530/DX500.
*8 The operating temperature range is 0°C to 40°C (32°F to 104°F) when the fan control is set to High Altitude mode (for altitudes from 1,400 m to 2,700 m (4,593 ft to
8,858 ft) above sea level). Also, if the ambient temperature exceeds 40°C (104°F) (35°C (95°F) in High Altitude mode) when the projector is being used with Lamp Select set to
Dual and Lamp Power set to High, the light output may be reduced approximately 20% to protect the projector.
*9 This function is not effective for some source combinafunctions such as power on over the LAN will not operate.
Also, only certain commands can be received for external
Specifications
Model
Power supply
Power consumption
120 V AC
PTDZ770K/DZ770LK
120 V AC, 7.5 A, 50/60 Hz, 220–240 V AC, 4.3 A, 50/60 Hz
220−240 V AC
830 W (880 VA) (0.2 W when
NORMAL
. Both with fan stopped.)
STANDBY
810 W (1,000 VA) (0.3 W when
NORMAL
. Both with fan stopped.)
MODE
STANDBY
set to
MODE
ECO
set to
* 1
ECO
, 6 W when
* 1
STANDBY
, 8 W when
MODE
STANDBY
set to
MODE
set to
Max. 2,924 BTU/hour Dissipation BTU
DLP™ chip
Lens
Lamp
Panel size
Display method
Pixels
PT-DZ770K
PT-DZ770LK
Screen size (diagonal)
Brightness* 2
Center-to-corner uniformity* 2
Contrast* 2
Resolution
Scanning frequency
HDMI/DVI-D
RGB
YP
B
P
R
(YC
B
C
R
)
Video/S-Video
17.0 mm (0.67 inches) diagonal (16:10 aspect ratio)
DLP™ chip × 1, DLP™ projection system
2,304,000 (1,920 × 1,200) pixels
Powered zoom (throw ratio 1.7– 2.4:1), powered focus F 1.7–1.9, f 25.6 – 35.7 mm
Optional powered zoom/focus lenses and fixed-focus lens
300 W (max. 310 W) UHM lamp × 2
1.27–15.24 m (50– 600 inches),
1.27–5.08 m (50–200 inches) with the ET-DLE055, 16:10 aspect ratio
7,000 lm (dual-lamp,
90 %
1,920 × 1,200 pixels
LAMP MODE
:
NORMAL
)
2,500:1 (full on/full off,
CONTRAST MODE
:
HIGH
* 3 ) f f f
H
: 15 – 91 kHz, f
V
: 50 –85 Hz, dot clock: 162 MHz or lower f
H
: 15 – 91 kHz, f
V
: 50 – 85 Hz, dot clock: 150 MHz or lower f
H
: 15.75 kHz, f
V
: 60 Hz [480i (525i)]
H
: 31.50 kHz, f
V
: 60 Hz [480p (525p)] f
H
: 15.63 kHz, f
V
: 50 Hz [576i (625i)]
H
: 31.25 kHz, f
V
: 50 Hz [576p (625p)] f f
H
H f
H
: 28.13 kHz, f
: 28.13 kHz, f
V
V
: 50 Hz [1080 (1125)/50i]
: 25 Hz [1080 (1125)/25p] f
H
: 27.00 kHz, f
V
: 24 Hz [1080 (1125)/24p] f f f
H
: 45.00 kHz, f
V
: 60 Hz [720 (750)/60p]
H
: 37.50 kHz, f
V
: 50 Hz [720 (750)/50p] f
H
: 33.75 kHz, f
V
: 60 Hz [1035 (1125)/60i]
H
: 33.75 kHz, f
V
: 60 Hz [1080 (1125)/60i] f
: 27.00 kHz, f
V
: 48 Hz [1080 (1125)/24sF] f
H
: 33.75 kHz, f
V
: 30 Hz [1080 (1125)/30p]
H
: 67.50 kHz, f
V
: 60 Hz [1080 (1125)/60p] f
H
: 56.25 kHz, f
V
: 50 Hz [1080 (1125)/50p] f
H
: 15.75 kHz, f
V
: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], f
H
: 15.63 kHz, f
V
: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift* 4
Vertical/horizontal
Keystone correction range
Installation
Terminals HDMI IN
DVI-D IN
RGB 1 IN
RGB 2 IN
VIDEO IN
S-VIDEO IN
SERIAL IN
SERIAL OUT
REMOTE 1 IN
REMOTE 1 OUT
REMOTE 2 IN
LAN
Cabinet materials
Dimensions (W × H × D)
PT-DZ770K
PT-DZ770LK
Weight* 7 PT-DZ770K
PT-DZ770LK
Operating environment
Supplied accessories
+50% from center of screen (powered) / ±10% from center of screen (powered)
Vertical: ±40° (±30° with the ET-DLE055/DLE080)
Ceiling/floor, front/rear
HDMI 19-pin × 1 (Deep Color, compatible with HDCP)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF,
1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 × 480)– WUXGA (1,920 × 1,200)* 5 , compatible with non-interlaced signals only, dot clock: 25 –162 MHz
DVI-D 24-pin × 1
(DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF,
1080/25p, 1080/30p, 1080/60p, 1080/50p,
5 , VGA (640 × 480)– WUXGA (1,920 × 1,200)* compatible with non-interlaced signals only, dot clock: 25 –162 MHz
BNC × 5 (RGB/YP
B
P
R
/YC
B
C
R
× 1)
D-Sub HD 15-pin (female) × 1 (RGB/YP
B
P
R
/YC
B
C
R
× 1)
BNC × 1 (composite video)
Mini DIN 4-pin × 1 (S-Video)
D-sub 9-pin (female) × 1 for external control (RS-232C compliant)
D-sub 9-pin (male) × 1 for link control (RS-232C compliant)
M3 × 1 for wired remote control
M3 × 1 for link control (for wired remote control)
D-sub 9-pin (female) × 1 for external control (parallel)
RJ-45 × 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
Molded plastic
498 × 175*
498 × 175*
6
6
× 466 mm (19-19/32 × 6-7/8* 6
× 432 mm (19-19/32 × 6-7/8* 6
Approximately 15.4 kg (34.0 lbs) (without lens)
× 18-11/32 in)(with supplied lens)
× 17 in) (without lens)
Approximately 16.3 kg (35.9 lbs) (with supplied lens)
Operating temperature: 0– 45 °C (32–113 °F)* 8 operating humidity: 20%–80% (no condensation)
,
Power cord, power cord secure lock, wireless/wired remote control unit, batteries (R6/AA type × 2), Software CD-ROM (Logo Transfer Software,
Multi Projector Monitoring & Control Software) (× 1)
*1 When the STANDBY MODE
is set to
ECO
, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal. *2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *3 Brightness becomes
3,500 lm with
CONTR AST MODE
set to
HIGH
. *4 Optical axis shift function cannot be operated when used with the
ET-DLE055. *5 Compliant with VESA CVT-RB. *6 With legs at shortest position. *7 Average value. May differ depending on the actual unit. *8 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the fan control is set to High Altitude mode (for altitudes from 1,400 m to 2,700 m
(4,593 ft to 8,858 ft) above sea level). Also, if the ambient temperature exceeds 40 °C (104 °F) (35 °C (95 °F) in High Altitude mode) when the projector is being used with Lamp Select set to
Dual and Lamp Power set to High, the light output may be reduced approximately 20% to protect the projector.
Dimensions
4 9 8 ( 19 -19 / 3 2 ) unit: mm (inches)
4 6 6 ( 18 -11/ 3 2 )
Terminals
1 LAN connector
2 Video input
3 S-Video input
4 RGB 1 input
5 HDMI input
6 DVI-D input
7 Remote 1 input
8 Remote 1 output
9 Remote 2 input
10 Serial input
11 Serial output
12 RGB 2 Input
1 2 3
7 8 9
4
10 11
5 6
12
Projection distance
16:10 aspect ratio
Diagonal image size
<throw ratio>
1.27
2.03
2.54
3.81
5.08
7.62
10.16
12.70
15.24
[ 50 ˝ ]
[ 80 ˝ ]
[100 ˝ ]
[150 ˝ ]
[ 200 ˝ ]
[ 300 ˝ ]
[400 ˝ ]
[ 500 ˝ ]
[ 600 ˝ ]
2.57
( 8.4 )
3.44
(11.3 )
5.18
(17.0 )
6.93
( 22.7 )
ET-DLE080
< 0.8 –1.0 :1> min.
max.
0.82
( 2.7 )
1.04
( 3.4 )
1.35
(4.4 )
1.70
( 5.6 )
1.68
( 5.5 )
2.11
( 6.9 )
8.67
( 28.5 )
10.42
( 34.2 )
10.75
( 35.3 )
12.91
(42.3 )
3.19
(10.5 )
4.27
(14.0 )
6.43
( 21.1)
8.59
( 28.2 )
16:9 aspect ratio
Diagonal image size
<throw ratio>
1.27
2.03
2.54
3.81
5.08
[ 200 ˝ ]
7.62
10.16
[400 ˝ ]
12.70
15.24
[ 50 ˝ ]
[ 80 ˝ ]
[100 ˝ ]
[150 ˝ ]
[ 300 ˝ ]
[ 500 ˝ ]
[ 600 ˝ ]
2.64
( 8.7 )
3.54
(11.6 )
5.33
(17.5 )
7.12
( 23.4 )
ET-DLE080
< 0.8 –1.0 :1> min.
max.
0.85
( 2.8 )
1.07
( 3.5 )
1.39
(4.6 )
1.75
( 5.7 )
1.73
( 5.7 )
2.17
( 7.1)
8.91
( 29.2 )
10.71
( 35.1)
11.05
( 36.3 )
13.27
(43.5 )
3.28
(10.8 )
4.39
(14.4 )
6.61
( 21.7 )
8.83
( 29.0 )
4.24
(13.9 )
5.67
(18.6 )
8.53
( 28.0 )
11.39
( 37.4 )
ET-DLE150
<1.3 – 1.9 :1> min.
max.
1.38
(4.5 )
2.01
( 6.6 )
2.23
( 7.3 )
2.81
( 9.2 )
3.25
(10.7 )
4.08
(13.4 )
14.25
(46.7 )
17.11
( 56.1)
20.58
( 67.5 )
24.70
( 81.0 )
6.14
( 20.1)
8.20
( 26.9 )
12.33
(40.4 )
16.45
( 54.0 )
Supplied lens
<1.7– 2.4 :1> min.
max.
1.82
( 6.0 )
2.95
( 9.7)
2.52
( 8.3 )
4.08
(13.4 )
3.71
(12.2 )
5.60
(18.4 )
7.50
( 24.6 )
11.28
( 37.0 )
5.11
(16.8 )
7.71
( 25.3 )
10.30
( 33.8 )
15.49
( 50.8 )
15.07
(49.4 )
18.86
( 61.9 )
22.64
(74.3 )
20.67
( 67.8 )
25.86
( 84.8 )
31.05
(101.9 )
Throw distance
7.41
( 24.3 )
9.91
( 32.5 )
14.91
(48.9 )
19.90
( 65.3 )
ET-DLE250
<2.3 – 3.6 :1> min.
max.
2.42
( 7.9 )
3.87
(12.7 )
3.92
(12.8 )
4.92
(16.1)
6.23
( 20.4 )
7.81
( 25.6 )
24.90
( 81.7 )
29.89
( 98.1)
11.75
( 38.6 )
15.70
( 51.5 )
23.59
( 77.4 )
31.48
(103.3 )
39.37
(129.2 )
47.25
(155.0 ) unit: metres (feet)
ET-DLE350
<3.6 – 5.4:1> min.
max.
3.80
(12.5 )
6.16
( 20.2 )
5.81
(19.1)
9.38
( 30.8 )
7.74
( 25.4 )
11.68
( 38.3 )
15.61
( 51.2 )
23.49
( 77.1)
11.76
( 38.6 )
17.71
( 58.1)
23.66
( 77.6 )
35.56
(116.7 )
31.36
(102.9 )
39.23
(128.7 )
47.11
(154.6 )
47.46
(155.7 )
59.36
(194.7 )
71.25
( 233.8 )
11.62
( 38.1)
17.58
( 57.7 )
23.54
( 77.2 )
35.46
(116.3 )
ET-DLE450
<5.4 – 8.6 :1> min.
max.
5.66
(18.6 )
9.23
( 30.3 )
9.12
( 29.9 )
14.78
(48.5 )
18.55
( 60.8 )
27.97
( 91.8 )
37.39
(122.7 )
56.24
(184.5 )
47.38
(155.4 )
59.30
(194.6 )
71.22
( 233.7 )
75.08
( 246.3 )
93.93
( 308.2 )
112.77
( 370.0 )
ET-DLE055
< 0.8 :1>
3.45
(11.3 )
–
( – )
–
( – )
–
( – )
–
( – )
0.83
( 2.7 )
1.35
(4.4 )
1.70
( 5.6 )
2.58
( 8.5 )
4.36
(14.3 )
5.82
(19.1)
8.76
( 28.8 )
11.70
( 38.4 )
ET-DLE150
<1.3 – 1.9 :1> min.
max.
1.42
(4.6 )
2.07
( 6.8 )
2.30
( 7.5 )
2.89
( 9.5 )
3.34
(11.0 )
4.19
(13.8 )
14.64
(48.0 )
17.58
( 57.7 )
21.15
( 69.4 )
25.39
( 83.3 )
6.31
( 20.7 )
8.43
( 27.7 )
12.67
(41.6 )
16.91
( 55.5 )
Throw distance
Supplied lens
<1.7– 2.4 :1> min.
max.
1.87
( 6.1)
2.64
( 8.7)
3.04
(10.0 )
3.82
(12.5 )
5.76
(18.9 )
7.71
( 25.3 )
4.27
(14.0 )
5.36
(17.6 )
8.08
( 26.5 )
11.60
( 38.1)
15.49
( 50.8 )
19.38
( 63.6 )
23.27
(76.4 )
10.80
( 35.4 )
16.23
( 53.2 )
21.66
(71.1)
27.10
( 88.9 )
32.53
(106.7)
7.62
( 25.0 )
10.19
( 33.4 )
15.32
( 50.3 )
20.46
( 67.1)
ET-DLE250
<2.3 – 3.6 :1> min.
max.
2.49
( 8.2 )
3.97
(13.0 )
4.03
(13.2 )
5.05
(16.6 )
6.41
( 21.0 )
8.03
( 26.3 )
25.59
( 84.0 )
30.72
(100.8 )
40.46
(132.7 )
48.57
(159.4 )
12.08
( 39.6 )
16.14
( 52.9 )
24.25
( 79.5 )
32.35
(106.1)
12.00
( 39.4 )
16.05
( 52.7 )
24.14
( 79.2 )
32.24
(105.8 )
ET-DLE350
<3.6 – 5.4:1> min.
max.
3.91
(12.8 )
5.98
(19.6 )
6.34
( 20.8 )
7.96
( 26.1)
9.65
( 31.7 )
12.09
( 39.7 )
40.33
(132.3 )
48.42
(158.9 )
18.21
( 59.7 )
24.32
( 79.8 )
36.55
(119.9 )
48.78
(160.0 )
61.01
( 200.2 )
73.24
( 240.3 )
18.08
( 59.3 )
24.20
( 79.4 )
36.45
(119.6 )
48.71
(159.8 )
ET-DLE450
<5.4 – 8.6 :1> min.
max.
5.82
(19.1)
9.39
( 30.8 )
9.50
( 31.2 )
11.95
( 39.2 )
15.20
(49.9 )
19.07
( 62.6 )
60.96
( 200.0 )
73.21
( 240.2 )
28.75
( 94.3 )
38.44
(126.1)
57.81
(189.7 )
77.18
( 253.2 )
96.55
( 316.8 )
115.91
( 380.3 )
ET-DLE055
< 0.8 :1>
3.55
(11.7 )
–
( – )
–
( – )
–
( – )
–
( – )
0.85
( 2.8 )
1.39
(4.6 )
1.75
( 5.7 )
2.65
( 8.7 )
Silver models
Silver cabinet models are also available as built-to-order.
The specifications are the same as those of the
PT-DZ770K and PT-DZ770LK.
Optional accessories
ET-PKD56H
Ceiling mount bracket for high ceilings
ET-DLE080
Zoom lens
ET-DLE150
Zoom lens
ET-PKD55S
Ceiling mount bracket for low ceilings
ET-DLE250
Zoom lens
PT-DZ770S
ET-EMF300
Replacement filter unit
ET-DLE350
Zoom lens
ET-LAD60A
Replacement lamp unit
ET-LAD60AW
Replacement lamp unit
(twin pack)
ET-DLE450
Zoom lens
PT-DZ770LS
ET-DLE055
Fixed-focus lens
N OT E S O N U S E
1. Do not install the projector in locations that are subject to excessive water, humidity, steam, or oily smoke. Doing so may result in fire, malfunction, or electric shock.
2. The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use.
3. The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions:
• Never place objects on top of the projector while it is in operation.
• Make sure there is an unobstructed space of 500 mm (1 ft 8 in) or more around the projector’s intake and exhaust openings.
• Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection. When stacking projector units, be sure to provide the amount of space indicated between them. These space requirements also apply to installation where only one projector unit is operating at one time and the other unit is used as a backup.
• If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must be between 0
°C (32 °F) and 40 °C (104 °F). Also, make sure the projector’s intake and exhaust openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake openings. Even when the ambient temperature near the intake opening is 40 °C (104 °F) or lower, an accumulation of hot air inside the cabinet may cause the protective circuit to activate and shut down the projector. Please give ample consideration to the design with regard to ambient temperature conditions.
4. If the projector is to be operated continuously 24 hours a day / 7 days a week, use the dual-lamp optical system’s alternating lamp operation (lamp changer) function. The projector cannot be operated continuously 24 hours a day / 7 days a week in dual-lamp mode. Allow a minimum of two hours per week of non-operation time per lamp if using the dual-lamp mode.
5. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
• The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
For more information about Panasonic projectors, please visit:
Projector Global Web Site –
Facebook – panasonic.net/avc/projector www.facebook.com/panasonicprojector
YouTube – www.youtube.com/user/PanasonicProjector
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice. Product availability differs depending on region and country. This product may be subject to export control regulations. DLP, DLP logo and DLP Medallion logo are trademarks or registered trademarks of Texas Instruments. The projection distances and throw ratios given in this brochure are for use only as guidelines. For more detailed information, please consult the dealer from whom you are purchasing the product. The PJLink trademark is an application trademark in Japan, the United States, and other countries and regions or registered trademarks. RoomView, Crestron RoomView, and Crestron Connected are trademarks of Crestron Electronics, Inc. All other trademarks are the property of their respective trademark owners. Projection images simulated. © 2012 Panasonic Corporation. All rights reserved.
JQA-QMA14392 EC98J2010 051
Factories of Business Solutions Business Group have received ISO
14001:2004—the Environmental Management System certification
(except for third parties’ peripherals).
All information included here is valid as of May 2012.
PT-DZ770G1 Printed in Japan.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project