Complete Surface Finishing Catalog
CS UNITEC SURFACE FINISHING TOOLS, ABRASIVES & ACCESSORIES
Surface Finishing Tools & Accessories
The value is in the engineering… the payback is in the performance.™
CS Unitec offers professional power tools and abrasive accessories for surface finishing on
STEEL, STAINLESS STEEL, ALUMINUM and other metals, as well as rigid plastics and wood.
Innovation is the engine of efficiency!™
Innovations in machine design, abrasive materials and production methods have led the way to:
Hollow-core abrasives
for linear grinding
The PTX Eco Smart is a surface finishing
machine with a finned shaft for quick
abrasive changing – simply slide on the
abrasives and they secure automatically. This
saves time and the abrasive wheels cost less.
(Patented!)
5/8"-11 SPEED NUT changeover
The EASY-LOCK SPEED NUT allows
you to change flap discs in seconds,
without tools. It is easily hand
tightened and eliminates the need for
wrenches or expensive hubs.
Belts with buttonhole fastening system
for grinding and polishing closed
pipe constructions. (Patented!)
(Patented!)
Important advancements in flap disc technology
• PLANTEX ® high-tech hemp fiber compound (Patented!)
• POLY-MAGIC-WHEEL for dry polishing inside corners
• MAGNUM ® FLEECE TOP for surface conditioning, fine finishing
and polishing
Safer and more efficient!
CS Unitec is the source for flap discs and abrasives that are free of
fiberglass, mineral fibers and epoxy resin. They offer superior material
removal, longer service life and smoother ergonomic handling.
Hemp fiber is an almost ideal base material
for backing plates of flap discs... and it is a
renewable resource!
Better for the environment!
The fiber in the high-tech PLANTEX® compound is derived from the hemp plant – a sustainable raw material which
counteracts greenhouse emissions as it grows. The PTX hollow-core abrasives not only improve production efficiencies,
but also minimize pollution from production to waste disposal... no plastic insert!
Better for your bottom line!
In addition to their time-saving features and high quality, flap discs and abrasives from CS Unitec can save you money –
their cost of production is lower, their quality is among the best and they offer superior service life. Hollow-core abrasive
wheels from CS Unitec are more affordable than traditional solid-core abrasives since they can be produced from less
raw material. These new hollow-core abrasive wheels can also be used on traditional finishing machines with the aid of
a simple core adapter (see page 5).
View product demonstrations at www.csunitec.com.
2
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Surface Finishing Tools and Abrasives Index:
p. 4-11
PTX Eco Smart – electric
LP 1503 AIR – pneumatic
Abrasives, Belts, Brushes, Grinding Wheels, etc.
p. 4-5
p. 6
p. 7-11
Multipurpose Grinders
p. 12-13
MULTI-MAX Stationary Multipurpose Grinder
Flexible Shaft - flexible drive shaft for use with VARILEX and MULTI-MAX
p. 12-13
p. 13
PTX ECO SMART
All-in-One Angle Grinder/Finishing, Blending & Polishing Machine p. 14-15
VARILEX ® Speed-controlled Grinder/Finisher/Polisher – 4" to 7" diameter
p. 14-15
Flap Discs, Blending, Finishing and Reduced Sparking Discs
p. 16-29
PLANTEX ® – for grinding steel and stainless steel
PLANTEX ® COOL TOP – for grinding stainless steel
POLY-MAGIC-WHEEL – for dry polishing in corners
TIGER SHARK-PLANTEX ® – for grinding aluminum
MAGNUM ® TOPMIX – for increased material removal
MAGNUM ® FLEECE – for conditioning, finishing and polishing
MAGNUM ® CLEAN – for pore-deep cleaning of metals
FIX HOOK & LOOP SYSTEM – elastic backing disc for finishing
EB Diamond Grinding and Cutting Discs – for reduced sparking
p.
p.
p.
p.
p.
p.
p.
p.
p.
Pipe Sanders
p. 30-31
PIPE-MAX – weld seam grinder and pipe sander
BOA LRP 1503 – for polishing handrails, pipe and tubing; electric or pneumatic
p. 30
p. 31
Angle Grinders, Sanders and Polishers
p. 32-36
LBS 1105 VE – finger belt sander for angles, corners, pipes and curves
Angle Grinders, Sanders – air and electric/dust extraction
Low-speed Electric Polishers
p. 32
p. 33-35
p. 36
Trelawny™ Surface Preparation Equipment
p. 37
Air and electric tools for preparation of concrete, steel and stone
p. 37
Deburring, Beveling and Faceting Machines
p. 38-43
Sheet Metal Deburring, Beveling and Faceting Machines
Portable Beveling Machines
p. 38-41
p. 42-43
18-20
21
22
23
24
24
25
26-27
28-29
PLANTEX®
PRODUCT INDEX
Surface Finishers
VARILEX®
FIX HOOK & LOOP
BOA PIPE SANDER
ANGLE GRINDERS WITH
DUST EXTRACTION
DEBURRING/BEVELING
Safety Guidelines
Use all products according to the safety regulations of OSHA and directives by ANSI (American National Safety Institute) B7.1, European DIN EN 13743 and
all other applicable international safety standards.
Warranty
Products of CS Unitec, Inc. are warranted to be free from defects in material and workmanship for one year from date of purchase. This warranty does not apply to
normal wear or products which have been abused, misused, modified or repaired by someone other than CS Unitec, Inc. or its Authorized Service Representatives.
If a product proves defective in material or workmanship within one year after purchase, return it to CS Unitec, Inc. or an Authorized Service Center,
transportation prepaid. CS Unitec, Inc. will, at its option, repair or replace defective products free of charge.
CS Unitec, Inc.’s sole liability and your exclusive remedy under this warranty is limited to repair or replacement of the defective product. There are no other
warranties expressed or implied and CS Unitec, Inc. shall not be liable for incidental, consequential or special damages, or expenses excepting only the cost
or expense of repair or replacement as described above.
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
3
PTX ECO SMART
The professional surface finisher
for hard, continuous use.
A revolution in linear grinding! Simply slide
on the abrasives and they secure themselves
automatically when the machine turns.
Fast and easy!
Press the spindle lock and
simply slide on the abrasive
wheels or brushes, turning
in the correct direction onto
the finned shaft. They will
be secured automatically.
1
Adjustable handle suitable
for right and left-handed
users. Anti-vibration handle
for comfortable, fatigue-free
working.
Grinding in corners is easy –
simply slide the abrasive wheel on
the finned shaft a little towards the
outside.
2
Simple speed control during
operation. Stable speed thanks
to tacho-generator.
Even narrow abrasive wheels can be
used on the PTX Eco Smart and
positioned freely on the finned shaft
(no spacer rings required).
3
QUICK-LOCK cable for fast,
easy replacement if cable is
damaged. 13 ft., included.
4
Infinitely adjustable cover guard
with securing points for the
extraction cover.
Part Number: 40005
SUBSTANTIAL
COST SAVINGS
ON ABRASIVES
5
Extended polycarbonate cover
guard for grinding wheel widths
up to 6". Part Number: 52706
1
6
Hollow core shaft adapter for
roller wheel widths up to 6" and
vibration-free operation.
Part Number: 42004
Now Available:
POLY-PTX Accu 28V
The only cordless longitudinal
grinder in the world that can
be used continuously for up to
15 minutes on one charge,
2nd battery included.
4
Part Number: 65302A
PTX Eco Smart
Part Number: 47002A
5
2
110 Volt
or 220 Volt
6
4
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
3
www.csunitec.com
New abrasive mounting system saves time,
reduces cost and eliminates vibration.
PTX Eco Smart is a multi-functional grinding and polishing
system for flat surfaces and open or closed pipe
constructions. It grinds from coarse to very fine finishes and
burnishes to a high-gloss finish. It enhances stainless steel,
steel and nonferrous metals including aluminum, brass,
bronze and copper, as well as wood and rigid plastic.
Balanced straight-line handling, high torque and electronic
speed control enable the PTX to easily produce matte, satin
and other decorative surfaces up to a mirror finish. Besides
fine finishing, the PTX is ideal for coarse grinding to remove
welds, deep scratches, oxidation, rust and paint.
Satin finishing using interleaf fleece wheel.
PTX Eco Smart features a newly developed abrasive
mounting system. This unique system allows grinding and
polishing wheels to be changed in seconds, without tools
or hardware. Simply slide the wheels and accessories onto
the finned, rigid rubber shaft. They secure themselves
automatically when the machine turns.
LINEAR GRINDING SYSTEM
Perfect finishes on
large surfaces, with
no shadows or streaks
The finned shaft design ensures absolutely no vibrations
during operation and 100% concentricity. The main savings
compared to other linear grinders comes from the cost of
abrasives. The elimination of an internal core means the
abrasive wheels can be produced less expensively, while
delivering the same high-quality results.
CS Unitec can provide you with an extensive range of
abrasive tools (patent pending) and accessories to cover
almost every conceivable surface finishing application.
A wide selection of hollow-core abrasives is available for
the PTX Eco Smart. The lack of a core insert means that the
abrasives are lighter, easier to use and less expensive.
PTX Eco Smart Specifications
Order Number: PTX Eco Smart
Power
15 Amp (1710 Watts)
110 Volt / 60 Hz
NOTE: We do continue to carry abrasives with core insert
adapters for older LP 1503 VR model grinders and other
machines. See our Price List for details.
(Also available: 230 Volt / 50 Hz)
Speed control dial
Wheel width
Wheel diameter
Weight
Standard equipment
Variable speed control from 1000 to
3800 RPM with tachogenerator for
constant speed, even under load
Accessories
up to 4" (or 6" wide abrasives)
up to 4-1/2"
Hollow-core Shaft Adapter
Allows user to utilize more economical
hollow-core abrasives on traditional surface
finishers. Fits 3/4" dia. x 4" long shaft and 1/4"
keyway(s). Overall diameter
of adapter is 1-3/4" (45mm) Part Number: 42004
7.25 lbs.
4" Interleaf (combi) wheel – P/N 47312
Shaft Adapter – P/N 42004
The PTX Bench Grinder – MULTI-MAX
Multipurpose sander with
two shaft mountings for
grinding discs, angle
grinders and grinding rollers
for longitudinal grinders.
Uses all PTX abrasive
wheels and discs. (See page
12 for more details.)
A range of professional
PTX Eco Smart kits is
available for a variety
of applications. See
page 6 for more
information.
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
5
Pneumatic Surface Finisher
P N E U M AT I C S U R FA C E F I N I S H E R / A C C E S S O R I E S
Save time sanding and polishing. 4" wide face is ideal for
finishing stainless steel, metals, wood and synthetics.
The powerful LP 1503 AIR grinding and polishing machine produces a uniform finish
fast and easy without leaving visible transitions and shadows. It is compact,
lightweight and heavy duty. Ideal for graining, polishing, brushing, blending,
deburring, cleaning welds, roughing and more. Easily achieve a #3, #4 or #8 finish.
A wide speed range, high torque and a comprehensive line of accessories make this
an essential tool for continuous-duty surface finishing.
Pneumatic Surface Finisher Specifications
Standard Equipment
Order Number: LP 1503 AIR
Load speed
Motor
Air consumption
Weight
2500 RPM
4" Interleaf (combi) wheel – P/N 47312
1 HP (1/2" Air Connection)
Shaft Adapter – P/N 42004
1 HP air motor at 90 PSI
20 CFM @ 90 PSI
8 lbs.
PTX Eco Smart Kits
PTX Professional Kit For Metalworking
This set comes in a strong, impact-resistant transport case and contains everything you need
for shadow-free industrial finishes. Match or create any finish up to a mirror finish on metals.
Prevent marks and fingerprints with newly developed cleaning products and preservatives.
Part Number 47004A
PTX Professional Kit for Metalworking includes:
1 PTX Eco Smart machine
1 Professional Case (P/N 80002)
1 40 grit flap wheel, 4" x 4-1/4" (P/N 47211)
1 80 grit interleaf (combi) wheel, 4" x 4-1/4" (P/N 47312)
1 Expansion roller, 3-1/2" x 4" (P/N 47005)
2 80 grit grinding belt sleeve, 3-1/2" x 4" (P/N 42080)
1 Fine fleece (Nonwoven) sleeve, 3-1/2" x 4" (P/N 42012)
1 Medium fleece (Nonwoven) sleeve, 3-1/2" x 4" (P/N 42011)
2 A45 "TZ" Pyramid sleeves, 3-1/2" x 4" (P/N 42245)
2 A30 "TZ" Pyramid sleeves, 3-1/2" x 4" (P/N 42230)
2 A16 "TZ" Pyramid sleeves, 3-1/2" x 4" (P/N 42216)
2 A06 "TZ" Pyramid sleeves, 3-1/2" x 4" (P/N 42206)
3 SuperPolish sleeves, 3-1/2" x 4" (P/N 42013N)
1 Belt driving roller (P/N 47006)
2 80 grit grinding belts, 1.2" x 24" (P/N 49080)
1 Medium fleece (Nonwoven) belt, 1.2" x 26" (P/N 49002)
2 A45 "TZ" Pyramid belts, 1.2" x 24" (P/N 49345)
2 A30 "TZ" Pyramid belts, 1.2" x 24" (P/N 49330)
2 A16 "TZ" Pyramid belts, 1.2" x 24" (P/N 49316)
2 A06 "TZ" Pyramid belts, 1.2" x 24" (P/N 49306)
3 SuperPolish belts, 1.2" x 26" (P/N 49004N)
1 Mini high gloss polishing paste, pink (P/N 40015T)
2 Mini polishing pastes, white and blue [P/N 40013 (white) P/N 40014 (blue)]
1 PTX lime spray can (P/N 40016)
5 Microfiber cloths (P/N 40030)
1 Brilliance clean spray bottle (P/N 40050)
1 INOX-protect spray bottle (P/N 40040)
PTX Basic Kit for Metal
PTX Kit For Woodworking
Basic set for coarse finishing to #4
finish on flat surfaces and pipes.
The complete set for treating
wooden surfaces. Strong
transport case with PTX
Eco Smart and a range of
brush wheels for various
wood structures. Suction
cover for extracting
grinding dust particles.
Part Number 47003A
PTX Basic Kit for Metal includes:
1 PTX Eco Smart machine
1 Carrying Case (P/N 40008)
1 60 grit flap wheel, 4" x 4-1/4" (P/N 47212)
1 80 grit interleaf (combi) wheel, 4" x 4-1/4" (P/N 47312)
1 Expansion roller, 3-1/2" x 4" (P/N 47005)
1 Medium fleece (Nonwoven) sleeve, 3-1/2" x 4" (P/N 42011)
1 Belt driving roller (P/N 47006)
1 80 grit grinding belt, 1.2" x 24" (P/N 49080)
1 Medium fleece (Nonwoven) belt, 1.2" x 26" (P/N 49002)
1 40 grit grinding belt, 3.6" x 4" (P/N 42040)
1 60 grit grinding belt, 3.6" x 4" (P/N 42060)
1 80 grit grinding belt, 3.6" x 4" (P/N 42080)
1 120 grit grinding belt, 3.6" x 4" (P/N 42120)
6
•
1-800-700-5919
Part Number 40004-3A
PTX Basic Kit for Woodworking includes:
1 PTX Eco Smart machine
1 Carrying Case (P/N 40008)
1 Suction cover (P/N 40005)
1 Spacer ring (P/N 40007)
1 PTX stranded wire wheel (P/N 56301)
1 Bristle wheel (P/N 46101)
1 Fiber wheel (P/N 46400)
•
Visit our Web site at www.csunitec.com
PTX Grinding Wheels for Coarse and Fine Finishing
PTX FLEECE (Nonwoven) Wheel
Elastic nylon fleece impregnated with abrasives for a
first-class finish. Produces shadow-free matte, satin and
polished finishes. For removing oxidation on stainless
steel and nonferrous metals and also suitable for
smoothing wooden surfaces. Very high fleece
content by fleece compression.
Diameter: 4"
Width: 2", 4-1/8" or 6"
Grit: 60, 80, 180, 280, 400, 600, 900
PTX Interleaf (Combi) Wheel
Nylon fleece combined with abrasive flaps for matte
finishing, burnishing and removing light scratches,
oxidation and handling marks on stainless steel and all
metals. For removing old paint on wood while smoothing
at the same time.
Diameter: 4"
Width: 2", 4-1/8" or 6"
Grit: 60, 80, 180
PTX FLEECE (Nonwoven) Wheels
Part No.
Grit
Size
47411
47412
47413
47414
47415
43601*
47417
60 grit
80 grit
180 grit
280 grit
400 grit
600 grit
900 grit
4"
4"
4"
4"
4"
4"
4"
dia. x 4-1/8" wide
dia. x 4-1/8" wide
dia. x 4-1/8" wide
dia. x 4-1/8" wide
dia. x 4-1/8" wide
dia. x 4-1/8" wide
dia. x 4-1/8" wide
47401
47402
47403
47404
47405
47406
60 grit
80 grit
180 grit
280 grit
400 grit
600 grit
4"
4"
4"
4"
4"
4"
dia.
dia.
dia.
dia.
dia.
dia.
47422
47423
80 grit
180 grit
4" dia. x 6" extra wide
4" dia. x 6" extra wide
x
x
x
x
x
x
2"
2"
2"
2"
2"
2"
wide
wide
wide
wide
wide
wide
* Keyed Shaft
PTX Interleaf (Combi) Wheels
Part No.
PTX Flap Wheel
With radial abrasive cloth flaps in various grit sizes for
removing rust, oxidation layers, minor scratches and for
the regraining and burnishing of metals.
Diameter: 4"
Width: 2" or 4-1/8"
Grit: 24, 40, 50, 60, 80, 120, 180, 240
Grit
Size
47311
47312
47313
60 grit
80 grit
180 grit
4" dia. x 4-1/8" wide
4" dia. x 4-1/8" wide
4" dia. x 4-1/8" wide
47301
47302
47303
60 grit
80 grit
180 grit
4" dia. x 2" wide
4" dia. x 2" wide
4" dia. x 2" wide
47322
47323
80 grit
180 grit
4" dia. x 6" extra wide
4" dia. x 6" extra wide
LINEAR GRINDING SYSTEM WHEELS
PTX abrasives from CS Unitec are made according to high quality standards. A unique production process guarantees
high concentricity and thus vibration-free grinding – a prerequisite for fatigue-free working and perfect surface finishes
with no transitions or shadows. Simply try it! You will be surprised how much smoother a PTX grinding wheel or
brush wheel is.
PTX Flap Wheels
PTX CLEAN Wheel
Made of hard-textured, nonwoven fleece for cleaning and
descaling welds, pore-deep removal of rust, oxidation and
coatings, cleaning beams, bricks, etc. Produces an effective
linear finish on stainless steel. A new production process
guarantees 100% concentricity.
Diameter: 4"
Width: 2" or 4"
Grit: Medium
PTX GUM Wheel
Soft rubber impregnated with abrasive grit for the
removal of minor scratches. Ideal for a bright,
decorative linear finish on stainless steel and nonferrous
metals and for smoothing wooden fibers.
Diameter: 4"
Width: 2" or 4"
Grit: 60, 180
Part No.
Grit
Size
47211
47212
47213
47214
47215
47216
40
60
80
120
180
240
grit
grit
grit
grit
grit
grit
4"
4"
4"
4"
4"
4"
dia. x 4-1/8" wide
dia. x 4-1/8" wide
dia. x 4-1/8" wide
dia. x 4-1/8" wide
dia. x 4-1/8" wide
dia. x 4-1/8" wide
47201
47202
47203
47204
47205
47206
47207
47208
24
40
50
60
80
120
180
240
grit
grit
grit
grit
grit
grit
grit
grit
4"
4"
4"
4"
4"
4"
4"
4"
dia.
dia.
dia.
dia.
dia.
dia.
dia.
dia.
x
x
x
x
x
x
x
x
2"
2"
2"
2"
2"
2"
2"
2"
wide
wide
wide
wide
wide
wide
wide
wide*
PTX CLEAN Wheels
HOLLOW-CORE ABRASIVES HAVE MANY ADVANTAGES:
• Easy to mount – simply slide on and off
Part No.
Grit
47511
47501
Medium (black)
Medium (black)
Size
4" dia. x 4" wide
4" dia. x 2" wide
PTX GUM Wheels
• 100% concentricity – no vibration
Part No.
• Lower cost and higher productivity!
We continue to carry abrasives with core inserts.
See our Price List.
Grit
Size
45061
60 grit
250 526-4 180 grit
4" dia. x 4" wide
4" dia. x 4" wide
47601
60 grit
250 526* 180 grit
4" dia. x 2" wide
4" dia. x 2" wide
* Keyed Shaft
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
7
Expansion Roller
➔
L I N E A R G R I N D I N G S Y S T E M – E X PA N S I O N R O L L E R & B E LT S L E E V E S
Use with sanding belts, fleece and felt sleeves. The sleeves are simply pushed over the expansion roller and held securely in
place by the centrifugal force. 3-1/2" dia. x 4" wide – Part Number: 47005
TIPS & TRICKS
Expansion Roller – Hard Rubber
Internal expansion slots now allow easier sleeve
replacement and improved adjustment to the workpiece,
as well as vibration absorption and concentricity.
Part Number: 47005
Belt Sleeves for Expansion Roller
PTX Zirconium Grinding Belt Sleeves
PTX Zirconium Grinding Belt Sleeve
Made of zirconium. Removes deep
scratches and grinds weld seams on metals.
Far less rework is required as a result of
using the time-saving linear grinding
technique.
Part No.
42040
42060
42080
42120
42150
42180
3-1/2" dia. x 4" wide
Grit: 40, 60, 80, 120, 150, 180
40
60
80
120
150
180
Size (dia. x width)
grit
grit
grit
grit
grit
grit
3-1/2"
3-1/2"
3-1/2"
3-1/2"
3-1/2"
3-1/2"
x
x
x
x
x
x
Quantity
4"
4"
4"
4"
4"
4"
10
10
10
10
10
10
per
per
per
per
per
per
pack
pack
pack
pack
pack
pack
PTX Ceramic Grinding Belt Sleeves
PTX Ceramic Grinding Belt Sleeve
High-performance ceramic aluminum
oxide grain. Increased removal rate and
longest life for highest productivity. Excels
in all metals
Part No.
42440
42460
42480
3-1/2" dia. x 4" wide
Grit: 40, 60, 80
Grit
Size (dia. x width)
40 grit
60 grit
80 grit
Quantity
3-1/2" x 4"
3-1/2" x 4"
3-1/2" x 4"
10 per pack
10 per pack
10 per pack
PTX "TZ" Pyramid Sleeves
Part No.
42265
42245
42230
42216
42206
PTX "TZ" Pyramid Sleeve
New abrasive cloth with pyramid-shaped grit
structure. Allows high material removal while
producing a very fine finish, reducing the
amount of work required when compared to
grinding belt sleeves and fleece sleeves.
Pyramid sleeves are ideal for pre-polishing for
fine mirror finishes and for removing
scratches and spot welds. Even roller scale
can be removed easily.
Grit
A65/320
A45/400
A30/600
A16/1200
A06/2000
Size (dia. x width)
grit
grit
grit
grit
grit
3-1/2"
3-1/2"
3-1/2"
3-1/2"
3-1/2"
x
x
x
x
x
Quantity
4"
4"
4"
4"
4"
10
10
10
10
10
per
per
per
per
per
pack
pack
pack
pack
pack
"TZ" PYRAMID GRIT COMPARISON TABLE
Corresponds
to grit size
A65
A45
A30
A16
A06
320
400
600
1200
2000
3-1/2" dia. x 4" wide
Grit: A65/320, A45/400, A30/600, A16/1200, A06/2000
PTX Fleece "Nonwoven" Sleeves
Part No.
PTX Fleece "Nonwoven" Sleeve
Nylon impregnated with abrasive grit for
removing minor to medium scratch marks
and oxidation coatings, matte and satin
finishing and deburring applications.
42010
42011
42012
42009
3-1/2" dia. x 4" wide
Grit: Coarse, Medium, Fine, Superfine
Corresponds
to grit size
➔
•
1-800-700-5919
Grit
Size (dia. x width)
coarse (brown)
medium (red)
fine (blue)
superfine (grey)
3-1/2"
3-1/2"
3-1/2"
3-1/2"
x
x
x
x
4"
4"
4"
4"
Quantity
5
5
5
5
per
per
per
per
pack
pack
pack
pack
FLEECE COMPARISON TABLE
Coarse
(brown)
Medium
(red)
Fine
(blue)
Superfine
(grey)
80
180
280
400
TIPS & TRICKS
To remove the grinding sleeve,
place the expansion roller on a round object that
is slightly smaller than the roller. Then push the
sleeve down slightly using both hands.
The expansion roller is
helpful when grinding
large areas and
removing large welds.
8
Grit
•
Visit our Web site at www.csunitec.com
Special Brushes for Metals, Wood and Hard Plastics
4" dia. x 2-7/8" wide – Part Number: 46101
4" dia. x 2-7/8" wide – Part Number: 46301
4" dia. x 1" wide – Part Number: 46102N*
4" dia. x 1" wide – Part Number: 47702*
* Requires spacer rings 40007
* Requires spacer rings 40007
PTX Stainless Steel Wire Wheels
Elastic stainless steel wire brush. For
cleaning welds, deburring, removing
rust, roughing and removing coatings.
PTX Fiber Wheel
Elastic fiber brush. For polishing stained wood, satin
finishing, pore-deep dust removal and cleaning
applications.
4" dia. x 2-7/8" wide – Part Number: 251 625
4" dia. x 4" wide – Part Number: 46400
4" dia. x 1" wide – Part Number: 47722*
* Requires spacer rings 40007
Note: Above wheels are configured for keyed shaft. Hollow-core shaft adapter not necessary.
Cotton Buffing Wheel
Cotton yarn wheel for use with compounds. Produces a
very bright high mirror finish. Use on flat, contoured or
irregular surfaces.
4" dia. x 2" wide
Part Number: CS2405*
4" dia. x 4" wide
Part Number: CS2410
4" dia. x 6" wide
Part Number: CS2420
Stranded wire wheel for creating a rustic
effect on wood
* Requires spacer rings 40007
Abrasives for Polishing to High-gloss and Mirror Finish
PTX Felt Sleeve
Made of soft merino (endless) for
polishing large stainless steel and
nonferrous surfaces quickly to a mirror
finish. Also suitable for hard plastics.
Must be used with the expansion roller.
3-1/2" dia. x 4" wide
PTX SuperPolish Sleeve
Revolutionary special fleece produces perfect brilliant,
shadow-free mirror finishes on stainless steel and
nonferrous metal surfaces using polishing compounds
(white and blue) and pink polishing cream. SuperPolish
fleece is absorbent, does not smear and saves significant
work time. Must be used with the expansion roller.
Part Number: 42013
3-1/2" dia. x 4" wide – Part Number: 42013N
Poly-PTX Cotton Rings
Fleece rings for polishing narrow or un-even stainless steel and non-ferrous metal surfaces using polishing compounds
(white and blue) and pink polishing cream. A separate Poly-PTX Cotton Ring must be used for each compound
or cream so as not to mix different compound grits.
For polishing narrow or uneven stainless steel surfaces:
100mm x 12mm (4" dia. x 1/2" wide), 8 per pack Part Number: 40019M
For polishing aluminum, brass and other nonferrous metals:
100mm x 12mm (4" dia. x 1/2" wide) Part Number: 250 521
See page 10 for pre-grinding
and polishing compounds,
mirror-finish creams, cleaners
and protective sprays for
finished metal surfaces.
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
LINEAR GRINDING SYSTEM – POLISHING & MAINTENANCE ACCESSORIES
PTX Bristle Wheel
Elastic nylon brush impregnated with abrasive grit. For
roughing and deburring metal, as well as creating a
rustic effect with even annual ring transitions on timber.
PTX Stranded Wire Wheels
Sturdy steel wire brush. For deburring, rust
removal, roughing and cleaning metal. For
brushing out soft annual rings on timber,
leaving a rough rustic effect.
9
PTX Pre-grinding & Polishing Compound
Essential for polishing all metals, including stainless steel,
aluminum, etc.
PTX Polishing Cream, Pink
For finishing. Produces a perfect
mirror finish on stainless steel and
nonferrous metals when used with
the SuperPolish Sleeve.
PTX® WHITE pre-polishing compound (23 oz.) – Part Number: 40013
PTX® BLUE finishing compound (23 oz.) – Part Number: 40014
PTX® WHITE and BLUE mini pastes (approx 4.2 oz. ea.) – Part Number: 40009
Can, 2.2 lbs. – Part Number: 40015
Miniature tube, 2 oz. (approx.) –
Part Number: 40015T
Micro-fiber Cloths
For pore-deep cleaning and
even distribution of maintenance
products and polishes. Our
micro-fiber cloths produce a top
finish on all materials.
PTX Lime (noncaustic)
For removing cream and compound
residues. Scatter on the surface, and
wipe off with a micro-fiber cloth.
Can, 2.2 lbs. – Part Number: 40016
Aluminum scatter container (approx 5.3 oz.)
Part Number: 4002A
Scatter container only – Part Number: 40020
INOX-Protect
(hard sealant) Protects
finished and polished
metal surfaces (stainless
steel, steel, aluminum,
brass, copper, etc.) with
a clear, dry adhesive
film. Removes fingerprints
and other dirt.
Canister (w/ spray bottle),
1.3 gal. – Part Number: 40041
Spray bottle, 17 oz. –
Part Number: 40040
Size: 13" x 14" – Part Number: 40030
Brilliance-Clean
For streak- and residue-free
cleaning of all surfaces, including
stainless steel, steel, aluminum,
brass and copper. Brilliance-Clean
is not harmful to plastics, wood or
coated surfaces. It removes
fingerprints, dust, compound
residue, minor oil and grease
marks and adhesive residue
effortlessly. Evaporates quickly
without leaving any residue on the
surface.
Canister (w/ spray bottle), 1.3 gal. – Part Number: 40051
Spray bottle, 17 oz. – Part Number: 40050
➔
POLISHING & MAINTENANCE / SURFACE FINISHING TIPS & TRICKS
Polishing and Maintenance Products (cont'd)
POLY Protection (oil film)
For cleaning and preserving
finished and polished stainless
steel and nonferrous metal
surfaces. Protects against
shadows and finger and water
marks for a long time. Spray
on and rub off with a microfiber cloth. Produces a darker
effect on finished surfaces. Also
suitable for food-grade and
outdoor use.
Canister (w/ spray bottle), 1.3 gal. – P/N: 40012
Spray bottle, 17 oz. – Part Number: 40011
TIPS & TRICKS
A perfect mirror finish on stainless steel
The newly developed grinding and polishing system, featuring special TZ-Pyramid and SuperPolish fabrics from CS Unitec, produces a
perfect mirror finish quickly and in just a few steps.
1
2
Step 1 - Pre-grinding
Prepare with TZ Pyramid
sleeve grit A45 (possibly A65)
to remove mill skin, scratches
and minor unevenness.
3
Step 2 - Intermediate grinding
Rework with TZ-Pyramid A30 and complete with
TZ-Pyramid A16. Use very little grinding pressure
and grind perpendicular and diagonally.
Tip: After each step, remove the compound residue from the workpiece
with POLY Lime and a micro-fiber cloth.
Step 3 - Mirror finish polish
Use the SuperPolish sleeve with white
polishing paste, then with blue polishing
paste. Use a different sleeve for each paste grit.
Polish diagonally. For a high gloss finish, use the
SuperPolish sleeve with the pink high gloss
polishing cream. Polish in one direction only.
The result... a brilliant mirror finish!
Maintain and protect finished or polished
stainless steel surfaces.
Compound and cream residues can be removed using PTX Lime. Simply
scatter on the lime and wipe it off using a micro-fiber cloth.
Compound residues, fingerprints, dust, minor oil and grease marks and
adhesive residue can be removed effortlessly with Brilliance-Clean. Any
residue will evaporate immediately.
To protect finished or polished metal surfaces, spray INOX-Protect on the
surface, rub off with a micro-fiber cloth, wipe the surface dry and then
polish briefly. The surface will be protected by a dry, invisible film for
several weeks. Polished finishes will not be darkened by this product.
10
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Abrasives for Pipe Constructions – Open or Closed
PTX Grinding Belts (Aluminum Oxide)
Part No.
Diameter: 3.5" x 2.8" Part Number: 47006
PTX Grinding Belt in high-quality
aluminum oxide (closed)
For coarse and initial grinding, rust removal and
smoothing round metal pipes. For use with grinding belt
rollers. For use on closed pipe constructions, see TIPS &
TRICKS below. Dimensions: 1.2" x 24"
Grit: 40, 60, 80, 120, 150, 180, 240
See ordering information at right.
PTX TZ-Pyramid Belt (closed)
New abrasive fabric with pyramid-shaped grit structure
for removing scratches, roller scale and spot welds. TZPyramid belts allow high material removal while
producing a very fine finish. They are ideal for the initial
grinding before polishing to a mirror finish. Because the
grit fineness is increased slowly, it is possible to omit
several operations. For use with grinding belt rollers. For
use on closed pipe constructions, see TIPS & TRICKS
below. Dimensions: 1.2" x 24", Grit: A65, A45, A30, A16, A06
See ordering information at right.
49040
49060
49080
49120
49150
49180
49240
Grit
40
60
80
120
150
180
240
Size (width x length)
grit
grit
grit
grit
grit
grit
grit
1.2"
1.2"
1.2"
1.2"
1.2"
1.2"
1.2"
x
x
x
x
x
x
x
Quantity
24"
24"
24"
24"
24"
24"
24"
10
10
10
10
10
10
10
per
per
per
per
per
per
per
pack
pack
pack
pack
pack
pack
pack
PTX "TZ" Pyramid Belts
Part No.
49365
49345
49330
49316
49306
Grit
A65/320
A45/400
A30/600
A16/1200
A06/2000
Size (width x length)
grit
grit
grit
grit
grit
1.2"
1.2"
1.2"
1.2"
1.2"
x
x
x
x
x
24"
24"
24"
24"
24"
Quantity
10
10
10
10
10
per
per
per
per
per
pack
pack
pack
pack
pack
PTX Fleece Nonwoven Belts (open)*
Part No.
Grit
49001
49002
49003
49007
coarse (brown)
medium (red)
fine (blue)
superfine (grey)
Size (width x length)
1.2"
1.2"
1.2"
1.2"
x
x
x
x
26"
26"
26"
26"
* Feature buttonhole fastening system
PTX Fleece Nonwoven Belt (open)
Buttonhole fastening system for fine grinding and prepolishing on open and closed pipe constructions and
handrails. The fleece belt can be opened and closed as
often as necessary. For use with grinding belt rollers.
International patent and design protected.
PTX Special Adhesive Tape
With glass fabric insert for joining
grinding belts. Strong, heat-resistant
adhesive force. For joining PTX
grinding and "TZ" Pyramid belts for
use on closed pipe constructions.
Affix the adhesive tape over the entire length of the grinding
belt, overlapping approximately 370˚.
➔
Dimensions: 1.2" x 26", Grit: coarse, medium, fine, superfine
See ordering information at right.
With buttonhole – PATENTED!
➔
Dimensions: 1" x 165’ Part Number: 49000
PTX Felt Belt (open)
Made of merino felt with buttonhole fastening system for
polishing work on open and closed pipe constructions
and handrails. The polishing belt can be opened and
closed as often as necessary. For use with grinding belt
rollers and our polishing compounds and creams. Use a
separate felt belt for each compound and cream grit. Do
not use compounds with different grits on felt.
International patent and design protected.
Dimensions: 1.2" x 26"
Part Number: 49004
INOX Miter Tape
Protect adjacent finishes when
grinding. Self-adhering 304
Stainless tape for use when
creating distinct edges on finishes.
Excellent for creating mitered
corners. Quick application and
residue-free removal. Minimal thickness for accurate grinding
lines. Easily cut with scissors.
Dimensions: One roll measures 6" x 8.2 ft.
Part Number: 40070
PTX SuperPolish Belt (closed)
For a perfect mirror finish on pipe constructions and handrails. SuperPolish is a new, special micro fleece that produces a
perfect, brilliant mirror finish on stainless steel and nonferrous metals. Smears and shadows are eliminated when used with
our polishing compounds (white and blue) and pink cream. SuperPolish is absorbent and saves lots of work time. For use
with grinding belt rollers. Dimensions: 1.2" x 26" (not available with buttonhole fastening system) Part Number: 49004N
➔
TIPS & TRICKS
Grinding and polishing closed pipe constructions
Fleece and felt belts with the patented buttonhole fastening system are ideal for
working on closed pipe constructions and handrails. The grinding belt can be
placed over the pipe and closed or opened again in a twist using the
buttonhole system. Changing a belt is quick and easy. The belt can be
opened and closed as often as required.
LINEAR GRINDING SYSTEM / ABRASIVES FOR PIPE CONSTRUCTIONS
PTX Grinding Belt Roller with stainless steel flanges
For grinding, fleece, SuperPolish and felt belts. The belt roller
is made of wear-resistant soft Vulculan with stainless steel
discs on the sides. The surface is grooved to ensure that the
abrasive belt does not slip.
Closed belts such as the high-quality aluminum oxide belt or the "TZ"
Pyramid belt must be cut open to work on closed pipe constructions.
Place the belt over the pipe and join using our special adhesive
tape (P/N 49000) over the entire length (approx. 370˚).
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
11
MULTI-MAX
Stationary multipurpose
grinder for all workshop
grinding, blending and
finishing jobs.
Uses all PTX abrasive wheels
and discs with 5/8" - 11 UNC
threads or 7/8" arbor.
2
1
Shaft mounting for all abrasives
from the PTX ECO SMART
system. (See page 7-9)
4
3
5/8" - 11 UNC spindle thread
for grinding discs or a 7/8"
arbor.
Uses the FIX HOOK AND
LOOP SYSTEM, as well as all
flap discs. (See pages 16-27)
Compatible with the new
flexible shaft attachment.
(See page 13)
Extensive accessories supplied
(See pages 7-9 & 16-27)
3
1
2
4
Uses all PTX abrasive
wheels and discs
MULTI-MAX
220 - 240V 3-phase
Part No. 30402
12
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Flexible Shaft
A versatile bench grinder
for use with VARILEX®, Angle Grinders
and MULTI-MAX
NEW!
• Two shaft mountings. Uses grinding discs with 5/8"-11
UNC or 7/8" mounting and abrasive grinding wheels for
longitudinal surface finishers.
• Fast deburring, trimming, grinding, brushing, and more.
• Uses Poly-PTX grinding wheels for longitudinal
grinding, satin finishing, etc. (See page 7-9)
• Uses grinding discs for plain grinding, fine grinding, etc.
(See pages 16-25)
• Uses FIX HOOK & LOOP system for plain grinding, fine
grinding, and more. (See pages 26-27)
• Powerful 3-phase, 750 watts AC motor, 220 volt.
• Transparent, hinged grinding guard.
• Roller support for more accurate work.
• Adjustable support rail with safety hood for grinding
discs up to 7".
• Drive motor can be used with the flexible shaft for
grinding in narrow and awkward spots. (See right)
• For a safe upright working position, use with the
MULTI-MAX machine stand. (P/N 30420)
The new flexible drive shaft with a sturdy core
and 5/8"-11 thread means that the MULTI-MAX
can now be upgraded to a powerful professional
drive motor. Ideal for narrow and awkward spots.
Accepts 1/8" or 1/4" shaft abrasives and with an
adapter for polishing rings up to 6" diameter. The
Flexible Shaft features an ergonomic handgrip
with vibration reduction.
5/8"-11 UNC connecting thread can also
be used with the VARILEX WSF 1800 or
Angle Grinders!
See page 14-15 for
details about the
VARILEX WSF 1800.
1/8" or 1/4"
MULTI-MAX Specifications
5/8" - 11 UNC
Order Number: 30402
Power 220 - 240V 3-Phase
Speed 2,800 RPM
MULTIPURPOSE BENCH GRINDER / FLEXIBLE SHAFT
MULTI-MAX
Abrasive Diameters 4" to 7"
Disc Mounting 5/8"-11 UNC or 7/8" arbor
Wheel Mounting Hollow core or Keyway
5/16" Wire
Weight 5.2 lbs.
Standard Equipment Multi-Max Tool, 220V
PTX Flap Wheel, 80 grit (2)
PTX Interleaf, 180 grit (1)
Mini polishing pastes, white (P/N 40013)
and blue (P/N 40014)
Spacer ring set (1)
Flat flap disc, 80 grit (1 P/N 36080)
FIX backing pad, 80 grit (1 P/N 80115U)
FIX Zirconium discs, 40, 60, 80, 120 grit (1 ea.)
FIX TZ Pyramid discs, 400, 600, 1200 grit (1 ea.)
FIX Super Polish disc (1 P/N 80715N)
Flexible Shaft Ordering Information
Item
Replacement Discs Flat flap disc, 60 grit (1 P/N 36060)
Flat flap disc, 80 grit (1 P/N 36080)
Flat flap disc, 120 grit (1 P/N 36120)
•
1-800-700-5919
•
Part No.
Flexible shaft with 5/16" steel
wire and 5/8" thread
10015
Separate 1/8" collet for flexible shaft
10011A
Separate 1/4" collet for flexible shaft
10011B
Machine holder (powder-coated steel)
incl. clamping screw for VARILEX® WSF 1800
10008
Visit our Web site at www.csunitec.com
13
VARILEX ®
WSF 1800 Professional
The most powerful speedcontrolled angle surface
finishing and blending
tool in its class.
Variable speed from 2000 to 7600 RPM, 15 Amp
(1710 W) power, disc change in seconds without tools.
For disc diameters of 4", 4-1/2", 5", 6" and 7".
VARILEX® is designed to efficiently maximize the capabilities of
flap, grinding and cutting discs and the Hook & Loop system.
2
1
Simple, fast disc changing with no tools - using the
5/8"-11 EASY-LOCK
SPEED NUT. 65008-1
3
New ergonomic design with
vibration-damping handle for
comfortable, fatigue-free
working.
Very powerful and
infinitely adjustable
4
Dust-tight field coil with
special coating.
Adjustable cover guard.
5
6
4
2
8
7
1
6
Easy speed control during
operation.
3
5
Service cover allows the carbon
brushes to be changed quickly.
Varilex® WSF 1800
Part Number: 65000A
Safety Notice: Always use the protective
wheel guard and follow all applicable
safety instructions and regulations.
FLEXIBLE SHAFT - The new flexible
drive shaft can now upgrade the
VARILEX® WSF 1800 to a powerful
professional drive motor for all
applications. See page 13 for details.
14
•
7
Ergonomically positioned
locking ON/OFF switch.
1-800-700-5919
•
8
QUICK-LOCK cable for fast,
easy replacement if cable is
damaged. 13 ft., included.
Visit our Web site at www.csunitec.com
The most powerful single-handed multi-function
machine available – more than just an angle grinder!
Kit sets for VARILEX® WSF 1800
Professional Multifunction Tool
Sensitive variable-speed control makes the VARILEX® ideal
for use with both flap discs and polishing discs, as well as
grinding and cutting wheels, for applications ranging from
grinding to blending, pre-polishing and polishing. The
variable-speed control:
• Doubles the service life of the disc being used
• Prevents glazing of the disc and heat deformation on
the workpiece
• Drastically reduces the noise level
The VARILEX® differs from a conventional angle grinder in its
motor design to allow for exceptional performance at low
RPM – without motor overheating or burnout. This machine
also offers the ability to change discs in seconds, without tools,
using the patented EASY-LOCK clamping nut and spindle lock.
It also offers:
• Optimal speed setting for a range of grinding and
polishing tools, yielding perfect results every time
• A balanced handle that ensures fatigue-free grinding
Varilex® WSF 1800 Basic Starter Kit
Part Number: 80053
Varilex® Basic Starter Kit includes 1 VARILEX® WSF 1800, 110
V with 5/8"-11 spindle, 1 Wheel guard for discs up to 5", 1
Carrying Case, 1 EASY-LOCK SPEED NUT, 2 PLANTEX® Cool
Top 5" grit 40, 3 PLANTEX® 5" grit 40, 2 PLANTEX® Cool Top 5"
grit 60, 2 PLANTEX® 5" grit 60.
The VARILEX® is not designed for continuous use at low
speed for polishing paint in the automotive trade.
FIX Hook & Loop
System Kits
See pages 26-27 for two
versatile Varilex® WSF
1800 / FIX Hook & Loop
System kits.
VARILEX® WSF 1800 Professional Specifications
Order Number: 65000A
➔
Power 15 Amp (1710 Watts)
110 Volt / 60 Hz
TIPS & TRICKS
(Also available: 230 Volt / 50 Hz)
Polish stainless
steel to a mirror
finish with the
VARILEX® WSF 1800
Professional
Variable speed Infinitely adjustable from 2000 to 7600 RPM
Diameters 4" to 7"
Spindle thread 5/8"-11 UNC
Arbor size 7/8"
(1) Initial grinding (remove
scratches and roller scale, level
welds) with TZ Pyramid disc
A45 (grit 400) or A65 (grit
320). Finish with TZ Pyramid
disc A30 (grit 600)
and A16 (grit 1200) (➔ page 27)
Weight 6.2 lbs.(2.8 kg)
Use with various discs and safety guards
Available with safety guards (5", 6" and 7") for use with varioussize grinding discs from 4" to 7" diameter (typical disc diameters
are 4", 4-1/2", 5", 6" and 7").
5/8"-11 EASY-LOCK SPEED NUT Clamping System
Using the EASY-LOCK SPEED NUT, you can
change the abrasive disc on the VARILEX in
a matter of seconds – without tools!
Easy hand tightening eliminates the need for
wrenches and expensive 5/8"-11 hubs.
(2) Main polish with SuperPolish disc
and white polishing compound, then with
blue polishing compound. Important: Use
a separate disc for each compound grit.
A L L - I N - O N E G R I N D I N G / S U R FA C E F I N I S H I N G / B L E N D I N G / P O L I S H I N G M A C H I N E
The VARILEX® boasts a powerful 15 Amp,1710 W motor
that has been designed and developed for heavy industrial
use. The speed is infinitely adjustable between 2000 and 7600
RPM. A tachogenerator keeps the speed constant, even when
the grinder is operating at full load.
(3) Mirror finish with SuperPolish disc and
pink polishing cream (➔ page 10)
Part Number: 65008-1
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
15
FLAP DISCS
Longer, faster
and better grinding.
Unbeatable technology and performance
The first flap discs for high-speed angle grinders were developed at the end
of the 1970s. More than 30 years of experience and unbeatable technology
go into the manufacture of every CS Unitec flap disc. In terms of material
removal capacity, service life and grinding quality, the flap discs that bear
the brand TIGER SHARK-PLANTEX® – plus the newest development,
PLANTEX®, made of hemp fiber high-tech compound – are among the best
in the world.
Top of the class in material removal, service life and quality
The performance and service life of a flap disc are not only dependent on
the abrasive fabric used, but above all on the correct combination of elastic
backing material; grit mixtures on the flaps; the angle at which the flap is
held against the material; hard pressing; gluing system; and more. These
considerations are part of what sets CS Unitec apart from the rest – not all
flap discs are the same!
Good for the environment and better for your health
Great care is taken to select raw materials that are environmentally sound
and user friendly. Commonly used materials such as fiberglass, mineral
fibers and epoxy resins are avoided in favor of sustainable raw materials
such as hemp for the discs’ backing plates. A patented, revolutionary elastic
adhesive mounting system for the abrasive fabric flaps further contributes to
the safety, performance, service life and user friendliness of CS Unitec flap
discs. Our discs also considerably reduce vibration and noise while grinding.
Unique patented production process
Completely new production technologies have been developed to
manufacture our high-quality flap discs. The adhesion of the flaps to the
backing disc is achieved using a patented, revolutionary adhesive system.
In contrast to many rival products, the flaps of CS Unitec’s discs are
pressed on to the backing disc over their full area – throughout the entire
hardening process – to produce a solid, compact and vibration-stable
abrasive. This also gives added support to the grits and holds them firmly in
their mounting, considerably extending the service life of the grinding discs.
16
•
1-800-700-5919
•
Standard and endurance
tests ensure quality and
play an essential role in
progressive new
developments.
Speed test
Grinding discs are tested on a
centrifugal test machine to ensure
that they can withstand the sort of
speeds that are required for
grinding work. The test system can
test discs at speeds of up to
30,000 RPM.
Endurance grinding test
Endurance tests are conducted to
measure the material removal and
service life of flap discs. New
fabrics are tested to ensure their
suitability and their grinding
properties on various materials.
Compliant with American
and German standards set
by ANSI B7.1 and DIN
13743.
Visit our Web site at www.csunitec.com
➔
TIPS & TRICKS
CS Unitec Flap Disc
Standard Flap Disc
A clear difference
These pictures show the clear difference between
a CS Unitec flap disc with hard-pressed flaps (top)
and a standard flap disc with fiberglass backing
and unpressed flaps (bottom). The poorly pressed
disc tends to "chatter" during the grinding process,
generating vibrations and resulting in the grit pulling
away from the mounting prematurely. This results in
irregular grinding, poor grinding capacity, short service
life and potential flap tearing.
Recommended speeds for maximum flap disc service
life and economy:
4" diameter:
4-1/2" diameter:
5" diameter:
6" diameter:
7" diameter:
Grinding & Polishing Discs
9000
7000
6000
5000
4000
–
–
–
–
–
11,000 RPM
9000 RPM
8000 RPM
7000 RPM
6000 RPM
GRINDING AND POLISHING DISCS
Check the speed
The right speed increases the service life of flap discs
by up to 100% – a major factor in ensuring a low-cost
workflow. Operating flap discs between 5000 and 8000
RPM sets the table for optimal grinding capacity and service
life. Powerful, speed-controlled angle grinders such as the
VARILEX® WSF 1800 Professional (see page 14) are ideal for
working with flap discs.
PLANTEX®
Flap discs for grinding steel and stainless steel, with hemp/polypropylene backing.
See page 18-20
MAGNUM® FLEECE
For surface conditioning, fine finishing
and polishing.
See page 24
PLANTEX® COOL TOP
Provides additional cooling to improve grinding
performance and service life for stainless steel.
See page 21
MAGNUM® CLEAN
For pore-deep cleaning of metals.
See page 25
FIX HOOK & LOOP SYSTEM
Highly elastic backing disc for
outstanding finish quality.
See page 26-27
POLY-MAGIC-WHEEL
Ideal for dry polishing in corners.
See page 22
TIGER SHARK-PLANTEX®
REDUCED SPARKING &
CUT-OFF DISCS
Specially designed for grinding aluminum.
See page 23
•
1-800-700-5919
EB diamond wheels reduce sparking.
See page 28-29
•
Visit our Web site at www.csunitec.com
17
Steel/Stainless Steel/Aluminum
PLANTEX ®
High-tech Compound
A quantum leap in
flap disc technology.
Provides:
✓Higher Productivity
✓Lower Cost
✓Increased Safety
PLANTEX® offers important advances in
grinding performance, service life, protection
for the environment and personal safety.
The development of the new PLANTEX®
high-tech compound has resulted in the
production of the first flap discs in the world
with a backing plate made of natural hemp,
with polypropylene used to bind it. In
addition to excellent material abrasion and a
long service life, the discs offer maximum
operator safety, protection of natural resources
and environmental friendliness.
Made
in Germany
This new composite material (hemp and polypropylene)
minimizes pollution from production to waste disposal.
Even the polypropylene binding material combusts to
approximately 1% carbon when disposed of by thermal
methods, producing almost zero residue. Polypropylene
is physiologically safe and is used in automotive
engineering (interior) and medical technology for
common items such as syringes, cannulae and infusion
bottles. As a result of its fiber structure, the hemp fiber
offers excellent tearing strength values. The superior
strength values of this high-tech compound are achieved
through a patented new treatment ("impact method") for
hemp fibers.
PATENTED!
www.csunitec.com
Safer working conditions
– No fiberglass, no mineral fibers, no epoxy resin
– Easy to trim, safe to use, easy to dispose of
Hemp fiber high-tech compound is an almost ideal
base material for flap disc backing plates – it is elastic,
heat-absorbent (for low grinding temperatures), very
easy to trim, safe to use and easy to dispose of. The
cavities of the hemp fiber structure, in conjunction with
polypropylene, have a highly insulating, damping and
noise-reducing effect, thus enhancing the safety features
of the discs.
18
•
1-800-700-5919
Earth friendly
– Minimizes pollution, from production to disposal
– Hemp plant counteracts greenhouse effect
Competitively priced
– Lower cost of production
– Superior service life; 100% utilization
•
Visit our Web site at www.csunitec.com
• Superior material abrasion and service life due to the discs’
springy elasticity and 100% pure zirconium.
• Self-trimming and very easy to cut – the backing plate reduces in
size automatically during the grinding process.
• Adjusts better to the surface of the workpiece during grinding.
• Absorbs vibration and noise due to its high fiber content.
• Heat-absorbent high-tech compound (with hollow fiber insulation)
reduces the temperature during grinding.
Trimming with cutting tools produces soft, harmless chips that can be
disposed of as domestic waste (smell is similar to wood chips).
Thermal disposal incinerates without residue, apart from 1% carbon.
• High strength, yet lightweight.
• High shape stability while maintaining elasticity.
• High-tech compound is resistant to most chemicals.
Grinding down to the
last fraction of an inch
• Made of a sustainable raw material – protects valuable
natural resources.
The backing plate used on
PLANTEX® flap discs reduces in
diameter automatically during
grinding. It can also be trimmed
with cutting tools, a process that
is simple and straightforward.
The PLANTEX® flap disc can be
used down to the last flap of the
abrading fabric – and saves you
money in the process!
• The backing plate can be disposed of safely and easily
(polypropylene binding combusts to approx. 1% carbon).
• Hemp provides good energy and CO2 balance.
• Outstanding value: PLANTEX® costs no more than a medium-quality
conventional flap disc.
The clever ones give way!
The fiber substrate of the PLANTEX® high-tech compound gives it
absorbent, spring-like properties that enhance grinding performance.
This elasticity provides a greater contact surface area with the
workpiece (more grit is used) that results in more material being
abraded. The material removal capacity is therefore higher. The
larger contact surface area also dissipates more heat, making the
grinding work cooler – the workpiece does not suffer smearing and
the abrasive fabric does not burn.
100%
Service
Life!
Use down to the last abrasive flap by automatic trimming during grinding
or trimming using cutting tools on a sharp steel edge.
Grinding area with an
elastic backing plate
P L A N T E X ® F L A P D I S C S F O R S T E E L / S TA I N L E S S S T E E L
PLANTEX® – features
to convince everybody!
The high-tech compound material used for the PLANTEX®
flap disc is perfectly safe. The backing plate is trimmed
automatically during the grinding process or can be
trimmed manually using cutting tools. The CO2 and
energy balance are also impressive. During its growth,
1 ton of hemp converts approximately 2 tons of carbon
dioxide into oxygen by means of photosynthesis. Hemp
therefore plays a beneficial role in counteracting the
greenhouse effect.
Grinding area with a
rigid backing plate
Ordering information for
general-use PLANTEX® flap
discs, as well as the full line
of PLANTEX® products,
begins on the next page.
elastic
•
1-800-700-5919
•
backing plate
rigid
Visit our Web site at www.csunitec.com
19
PLANTEX®
PLANTEX® GENERAL-USE GRINDING DISCS
Elastic flap disc for general use.
20
The PLANTEX® high-tech compound is becoming
the standard flap disc for many companies. The backing
plate is made of hemp fiber and can be trimmed completely.
High grinding performance is achieved with the extreme
elasticity of the backing plate and the 100% RZ-Zirconium
abrasive fabric.
PLANTEX® Specifications
Dimensions
Diameter: 4", 4-1/2", 5", 7"
Max. speed
13,300 RPM for 4-1/2" diameter
Ideal speed
5000 to 8000 RPM
ANSI B7.1, 260 ft./sec. DIN EN 13743
Complies with
40, 60, 80, 120
Grits
5/8" or 7/8"
Arbor size
PLANTEX® Ordering Information
•
1-800-700-5919
Part No.
Size (dia. x width x arbor)
Grit
Max. Speed
Quantity
93514
93516
93518
93519
4"
4"
4"
4"
40
60
80
120
15,000
15,000
15,000
15,000
RPM
RPM
RPM
RPM
10
10
10
10
pack
pack
pack
pack
93524
93526
93528
93529
4-1/2"
4-1/2"
4-1/2"
4-1/2"
40
60
80
120
13,300
13,300
13,300
13,300
RPM
RPM
RPM
RPM
10
10
10
10
pack
pack
pack
pack
93534
93536
93538
93539
5"
5"
5"
5"
x
x
x
x
0.87"
0.87"
0.87"
0.87"
x
x
x
x
7/8"
7/8"
7/8
7/8"
40
60
80
120
12,200
12,200
12,200
12,200
RPM
RPM
RPM
RPM
10
10
10
10
pack
pack
pack
pack
93544
93546
93548
93549
7"
7"
7"
7"
x
x
x
x
0.87"
0.87"
0.87"
0.87"
x
x
x
x
7/8"
7/8"
7/8"
7/8"
40
60
80
120
8600
8600
8600
8600
10
10
10
10
pack
pack
pack
pack
•
x
x
x
x
0.63"
0.63"
0.63"
0.63"
x
x
x
x
x
x
x
x
5/8"
5/8"
5/8"
5/8"
0.87"
0.87"
0.87"
0.87"
x
x
x
x
7/8"
7/8"
7/8"
7/8"
RPM
RPM
RPM
RPM
Visit our Web site at www.csunitec.com
PLANTEX® COOL TOP ®
The PLANTEX® high-tech compound is becoming
the standard flap disc for many companies. It is
fiberglass free and provides excellent performance
and service life. PLANTEX® also protects the
environment and precious resources.
The PLANTEX® COOL TOP ® high-tech compound has
been specifically developed for grinding stainless steel.
A new abrasive fabric with additional top-size coating
improves grinding performance and service life and also
provides additional cooling.
PLANTEX® COOL TOP® Specifications
Dimensions
Diameter: 4", 4-1/2", 5", 7"
Max. speed
13,300 RPM for 4-1/2" diameter
Ideal speed
5000 to 8000 RPM
Complies with
Grits
Arbor size
Strength & safety with FEM
The backing plate for the PLANTEX®
high-tech compound is calculated
using the finite element method
(FEM). That ensures that it provides
the optimal strength and safety
properties, while minimizing material
use. Like all flap discs from CS Unitec, PLANTEX® flap
discs are approved for 260 ft./sec. to DIN EN 13743 and
have been approved by the MPA (Material Testing
Institute) in Hanover and by the BGIA (Professional
Association Institute for Industrial Safety). PLANTEX®
additionally complies with ANSI standard B7.1.
ANSI B7.1, 260 ft./sec. DIN EN 13743
40, 60 (for finer grits, use PLANTEX 80 and 120)
5/8" or 7/8"
PLANTEX® COOL TOP® Ordering Information
Part No.
Size (dia. x width x arbor)
Grit
Max. Speed
Quantity
93614
93616
4" x 0.63" x 5/8"
4" x 0.63" x 5/8"
40
60
13,300 RPM
13,300 RPM
10 pack
10 pack
93624
93626
4-1/2" x 0.87" x 7/8"
4-1/2" x 0.87" x 7/8"
40
60
13,300 RPM
13,300 RPM
10 pack
10 pack
93634
93636
5" x 0.87" x 7/8"
5" x 0.87" x 7/8"
40
60
12,200 RPM
12,200 RPM
10 pack
10 pack
93644
7" x 0.87" x 7/8"
40
12,200 RPM
10 pack
Easy Disc Changeover No Wrenches or Hubs Required!
Grinding discs can be changed in seconds,
without tools, using the 5/8"-11 EASY-LOCK
SPEED NUT. It is easily tightened
by hand and eliminates the need
for wrenches or expensive hubs.
Part Number: 65008-1
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
P L A N T E X ® C O O L T O P ® G R I N D I N G D I S C S F O R S TA I N L E S S S T E E L
Flap disc with cool performance for
grinding stainless steel.
STAINLESS STEEL
21
Dry polish stainless steel in corners
up to a mirror finish!
The POLY-MAGIC-WHEEL is designed for finishing and dry
polishing in corners, producing up to a perfect mirror finish in
just two steps. These discs are made of highly compressed
fleece material and are made in a sophisticated production
process using compressed single flaps that are strengthened
by being impregnated with foam. This special process allows
considerably more abrasive material to be used than on
conventionally wound "unitized wheels and discs."
The POLY-MAGIC-WHEEL is ideal for grinding and polishing
bead and corner welds. It may only be used frontally.
POLY-MAGIC-WHEEL Specifications
Dimensions
6-1/2" dia. x 1/2" material thickness
x 7/8" arbor
Max. speed
5000 RPM
Ideal speed
3000 to 4000 RPM
Grits
A/80, B/900
Ideal for speed-controlled angle grinders
Ideal for
polishing
in corners
POLY-MAGIC-WHEEL Ordering Information
Part No.
Grit
Usage
5 pk.
5 pk.
TIPS & TRICKS
Polishing corner welds with the POLY-MAGIC-WHEEL
Mirror finish
in 2 steps:
Obtaining good polish quality when finishing corner welds is difficult, especially for the
fabrication of railings. The POLY-MAGIC-WHEEL was designed to help you more easily
produce a truly perfect finish in these applications. This highly compacted fleece disc was
designed specifically for grinding and polishing bead
and corner welds. The POLY-MAGIC-WHEEL disc
can reduce the time required for this work to a
minimum, and the result can only be described
as a minor miracle.
Carry out the initial grinding and leveling of
welds with the red disc, grit A (80 grit).
Then polish to a mirror finish using
the POLY-MAGIC gray disc, grit B
(900 grit). These discs are very
aggressive; they save a lot of
working time and the result is
sensational. No polishing
compounds or creams are
required for polishing
with the POLY-MAGICWHEEL (dry polish).
22
Qty.
96720 Grit A (80 grit) Initial grinding & leveling welds (red)
96721 Grit B (900 grit) Polishing to a perfect mirror finish (gray)
➔
MIRROR FINISHING AND CORNER POLISHING DISCS
POLY-MAGIC-WHEEL
•
1-800-700-5919
•
1
POLY-MAGIC-WHEEL A (80 grit)
2
POLY-MAGIC-WHEEL B (900 grit)
Visit our Web site at www.csunitec.com
TIGER SHARK-PLANTEX®
Aluminum
& KANGAROO ALU-FIX® OIL
TIGER SHARK-PLANTEX® elastic discs are unbeatable for the
difficult grinding of aluminum. High material removal, reduced
grinding temperature and no glazing with aluminum particles
make the TIGER SHARK® the first choice for these
applications. This flap disc, with its ceramic/corundum cotton
abrasive fabric, also offers high grinding capacity and low tool
costs for steel and nonferrous metals. The backing plate is
elastic PLANTEX® earth-friendly compound and adjusts well to
the shape of the workpiece. TIGER SHARK® is ideal for
grinding curved surfaces and shapes, and it is often used in
car body shops, car workshops and for tool making.
The excellent features of the TIGER SHARK® can be
enhanced even further with the newly developed Kangaroo
ALU-FIX ® OIL. A quick spray on the workpiece will solve many
of the problems you may have encountered while grinding
aluminum in the past. Glazing is no longer necessary, the
material removal rate is up to 300% higher, the finish is visibly
better – and the flap disc will last up to three times longer.
TIGER SHARK-PLANTEX® Specifications
Dimensions
Diameter: 4", 4-1/2", 5", 7"
Max. speed
13,300 RPM for 4-1/2" diameter
Ideal speed
5000 to 8000 RPM
Compliant with
Grits
Unique flap discs with a PLANTEX® elastic backing disc.
FLAP DISCS FOR GRINDING ALUMINUM
The new dimension for grinding aluminum.
ANSI B7.1, 240 ft./sec. DIN EN 13743
40, 60, 80, 120
TIGER SHARK-PLANTEX® Ordering Information
Order No.
Size (dia. x arbor)
Grit
Max. Speed
Quantity
93814
93816
93818
93819
4"
4"
4"
4"
40
60
80
120
15,000
15,000
15,000
15,000
RPM
RPM
RPM
RPM
10
10
10
10
pack
pack
pack
pack
93824
93826
93828
93829
4-1/2"
4-1/2"
4-1/2"
4-1/2"
40
60
80
120
13,300
13,300
13,300
13,300
RPM
RPM
RPM
RPM
10
10
10
10
pack
pack
pack
pack
93834
93836
93838
93839
5"
5"
5"
5"
x
x
x
x
7/8"
7/8"
7/8"
7/8"
40
60
80
120
12,200
12,200
12,200
12,200
RPM
RPM
RPM
RPM
10
10
10
10
pack
pack
pack
pack
93844
93846
93848
93849
7"
7"
7"
7"
x
x
x
x
7/8"
7/8"
7/8"
7/8"
40
60
80
120
8600
8600
8600
8600
10
10
10
10
pack
pack
pack
pack
x
x
x
x
5/8"
5/8"
5/8"
5/8"
x
x
x
x
7/8"
7/8"
7/8"
7/8"
RPM
RPM
RPM
RPM
Kangaroo ALU-FIX® OIL
Spray on aluminum workpiece to improve the
removal rate and increase abrasive life. Available
in a 1 pint spray bottle or a 1.3 gal. canister with
a spray bottle.
Part Numbers: 1-pint spray bottle – 40010
1.3 gal. canister and spray bottle – 40010k
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
23
MAGNUM® TOPMIX
FLEECE DISCS
Increased material removal,
longer service life.
The MAGNUM® TOPMIX was developed to increase material
removal during finishing while also improving service life. The
80 combination grit is much more aggressive than our
MAGNUM® FLEECE TOP 80 grit (see below). Individual flaps
with foamed and compressed fleece offer a much higher
removal capacity, making it ideal for removing spot welds and
deep scratches on stainless steel, steel and nonferrous
metals. The coordinated fleece combination additionally
ensures that a good finish is achieved. The MAGNUM®
TOPMIX also offers excellent service life, making deburring
and cleaning of cast parts and welds a breeze.
MAGNUM® TOPMIX Specifications
MAGNUM® TOPMIX Ordering Information
Part No.
Size (dia. x thick x arbor)
Grit
Max. Speed
Qty.
96705
5" x 5/8" x 7/8"
80
6000 RPM
5 pk.
Dimensions
5" dia. x 5/8" fleece thickness x
7/8" arbor
Ideal speed
2000 to 4500 RPM
Max. speed
6000 RPM
Grit
80
Ideal for speed-controlled angle grinders
MAGNUM® FLEECE TOP
Made of foamed, compressed-grit,
interspersed nonwoven fleece.
The MAGNUM® FLEECE TOP is a versatile fleece disc for
surface conditioning, fine finishing and polishing, offering up
to eight times the service life of traditional fleece and SC
discs. Its range of uses is impressive. The FLEECE TOP is
an ideal disc for metalworking that requires fine grinding and
pre-polishing to a uniform clean finish, and it is effective at
descaling and removing oxidation, scratches, rust, burrs and
paint. It replaces a wire brush, abrasive paper and grinding
rubbers and is self cleaning, with a special mixture that
prevents glazing and loading. The foamed fleece ring is
approx. 5/8" thick. This highly compressed quantity of fleece
material ensures an extra-long service life.
MAGNUM® FLEECE TOP Specifications
MAGNUM® FLEECE TOP Ordering Information
24
Part No.
Size (dia. x thick x arbor)
Grit
Max. Speed
Qty.
96710
96711
96712
96713
96714
96715
4-1/2" x 5/8" x 7/8"
4-1/2" x 5/8" x 7/8"
4-1/2" x 5/8" x 7/8"
4-1/2" x 5/8" x 7/8"
4-1/2" x 5/8" x 7/8"
4-1/2" x 5/8" x 7/8"
80
180
280
400
600
900
8000 RPM
8000 RPM
8000 RPM
8000 RPM
8000 RPM
8000 RPM
5 pk.
5 pk.
5 pk.
5 pk.
5 pk.
5 pk.
•
1-800-700-5919
Dimensions
4-1/2" dia. x 5/8" fleece thickness x
7/8" arbor
Ideal speed
2000 to 4500 RPM
Max. speed
8000 RPM
Grits
80, 180, 280, 400, 600, 900
Ideal for speed-controlled angle grinders
•
Visit our Web site at www.csunitec.com
MAGNUM® CLEAN
CLEANING DISCS
For pore-deep cleaning of metals
(sand-blasting effect).
MAGNUM CLEAN® is an elastic cleaning disc for the poredeep cleaning of metals. This elastic coarse fleece disc is
interspersed with silicon carbide grit and cleans without
harming the base material. The disc itself is iron-free, which
means that there is no risk of corrosion. The coarse fleece
material will not glaze or load, even if exposed to heavy
contamination. MAGNUM CLEAN® is the ideal cleaning disc
for pore-deep removal of paint, rust, scale and oil smears, as
well as for cleaning and exposing without material removal.
It is ideal for use in body shops (cleans thin sheet metal with
no material removal) and in the automotive industry, and it is
also suitable for underseal, renovating, painting and building
work. MAGNUM CLEAN® is particularly good for removing
paint and other coatings on wood, stone and metal (including
window frames, doors and frames, furniture, house facades,
graffiti, railings, fences, supports and machines).
MAGNUM® CLEAN Specifications
Dimensions
5" dia. x 5/8" material thickness x 7/8" arbor
Ideal speed
2000 to 4500 RPM
Max. speed
5000 RPM
Grit
MAGNUM® CLEAN Ordering Information
Part No.
Size (dia. x thick x arbor) Grit
96700 5" x 5/8" x 7/8"
Medium
Max. Speed
Qty.
5000 RPM
10 pk.
Medium
Ideal for speed-controlled angle grinders
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
25
FIX HOOK & LOOP SURFACE FINISHING & POLISHING SYSTEM
PATENTED!
FIX HOOK &
LOOP SYSTEM
Highly elastic backing disc for
previously impossible finish quality;
ideal for surface conditioning and
polishing up to a mirror finish.
The FIX Hook & Loop system takes advantage of a flexible
backing pad and allows a disc to be changed in seconds
without tools.
The FIX Hook & Loop system is a good fit wherever disc
flexibility and frequent changeover are important. It will save
time in industrial metalworking applications such as car
body shops and repair shops.
The system requires a speed-controlled angle grinder, such
as the VARILEX WSF 1800 Professional. A wide range of
abrasives are available for all steps leading from rough
grinding up to a mirror finish.
The FIX Hook & Loop system is an
essential surface finishing and polishing
system for all sheet metal applications.
The FIX Hook & Loop’s "green" backing disc is made of
natural materials. The flexibility of the abrasives allows you
to achieve results similar to stationary grinding machines.
The FIX family of abrasives must be used with the
FIX original backing disc.
Special FIX Backing Disc with PUR
Foam Absorption Coating
For use with the FIX Zirconium disc, FIX TZ
Pyramid disc and FIX SuperPolish disc. The
backing disc is made of elastic PUR with a
special 1/4" absorption coating.
Diameter: 4-1/2" with 5/8"-11 thread –
P/N: 80115UF
Diameter: 6" with 5/8"-11 thread – P/N: 80150UF
FIX Test Kit
This kit contains all the FIX Hook & Loop System
components to go from rough grinding up to a mirror
finish. See page 27 for kit contents Part Number: 80051U
Special FIX Backing Pad with Centering
Pin without Foam
For use with the FIX Zirconium disc, FIX TZ
Pyramid disc and FIX SuperPolish disc. The
backing disc is made of special elastic material
with a centering pin for perfect alignment.
Diameter: 4-1/2" with 5/8"-11 thread – P/N: 80115U
Diameter: 6" with 5/8"-11 thread – P/N: 80150U
FIX Zirconium Disc
Abrasive disc with Hook & Loop fastening and an
outstanding grinding capacity. Ideal for body shops
and car workshops.
Diameter: 4-1/2"; Grits: 40, 60, 80, 120
FIX Zirconium Disc Ordering Information
FIX starter kit
This kit includes a range of FIX Hook & Loop
components, as well as a VARILEX WSF 1800
Angle Grinder. See page 27 for kit contents.
Part Number: 80050U
26
•
1-800-700-5919
Part No.
Diameter
Grit
Quantity
80904
80906
80908
80909
4-1/2"
4-1/2"
4-1/2"
4-1/2"
40
60
80
120
50
50
50
50
pack
pack
pack
pack
80914
80916
80918
80919
6"
6"
6"
6"
40
60
80
120
50
50
50
50
pack
pack
pack
pack
•
Visit our Web site at www.csunitec.com
More Abrasives for the FIX Hook & Loop System
FIX Fleece (Nonwoven) Disc
Versatile disc for fine surface
conditioning and pre-polishing.
Diameter: 4-1/2" and 6"; Grits: A65, A45, A30, A16, A06 (see grit equivalents below)
FIX TZ Pyramid Disc Ordering Information
Part No.
Diameter
Grit
Quantity
80932
80940
80960
80970
80980
4-1/2"
4-1/2"
4-1/2"
4-1/2"
4-1/2"
A65/320
A45/400
A30/600
A16/1200
A06/2000
10 pack
10 pack
10 pack
10 pack
10 pack
80985
80986
80987
80988
80989
6"
6"
6"
6"
6"
A65/320
A45/400
A30/600
A16/1200
A06/2000
10 pack
10 pack
10 pack
10 pack
10 pack
Grit Equivalents
A100 = Grit 220
A65 = Grit 320
A45 = Grit 400
A30 = Grit 600
A16 = Grit 1200
A06 = Grit 2000
Diameter: 4-1/2" and 6"
Grits: coarse, medium, fine, superfine
FIX Fleece (Nonwoven) Disc Ordering Information
Part No.
Diameter
Grit
Quantity
80615
80616
80617
80618
4-1/2"
4-1/2"
4-1/2"
4-1/2"
coarse (brown)
medium (red)
fine (blue)
superfine (grey)
10 pack
10 pack
10 pack
10 pack
80650
80651
80652
80653
6"
6"
6"
6"
coarse (brown)
medium (red)
fine (blue)
superfine (grey)
10 pack
10 pack
10 pack
10 pack
FIX-Klett (Nonwoven) Disc
The new FIX-Klett disc is a superfine soft
nylon-fleece material for prepolishing
aluminum or other soft, nonferrous
materials to a mirror finish.
When polishing with FIX SuperPolish Discs, use a separate SuperPolish
disc for each compound and cream. The different compound grits
must not be mixed. Remove compound and cream residues from the
workpiece after each stage using POLY-PTX® lime and a microfiber cloth.
Diameter: 4-1/2"; Superfine grit
Part Number: 80680 (10 pack)
Diameter: 6"; Superfine grit
Part Number: 80690 (10 pack)
FIX SuperPolish Disc
SuperPolish is a new, special needle fleece that
produces a perfect, brilliant mirror finish on stainless
steel and nonferrous metals. Used with our polishing
compounds (white and blue) and pink cream to
avoid smears and shadows. SuperPolish is
absorbent, does not smear and saves time.
Diameter: 4-1/2"; Thickness: 1/4"
Part Number: 80715N (10 pack)
Diameter: 6"; Thickness: 1/4"
Part Number: 80750N (10 pack)
FIX SuperPolish Felt Disc
Special merino wool felt that produces a
perfect, brilliant mirror finish on stainless
steel and nonferrous metals. Used with
our polishing compounds (white and
blue) and pink cream to avoid smears
and shadows.
Diameter: 4-1/2"; Thickness: 1/4"
Part Number: 80715 (10 pack)
➔
FIX Hook & Loop System Kits
FIX HOOK & LOOP ABRASIVES
FIX TZ Pyramid Disc
New abrasive fabric with pyramid-shaped grit
structure for high material removal while
producing a very fine finish. FIX TZ Pyramid
discs reduce the amount of work required
compared to grinding belt sleeves and fleece
sleeves. Ideal for pre-polishing for mirror finishes
and for removing scratches and spot welds. An
additional absorption coating drastically reduces
the grinding temperature and protects the Hook
& Loop components and the workpiece.
Diameter: 6"; Thickness: 1/4"
Part Number: 80750 (10 pack)
TIPS & TRICKS
Perfect mirror finish on stainless steel
and nonferrous metals
The new TZ Pyramid and SuperPolish discs for the FIX
Hook & Loop system can be used with an angle grinder
to create perfectly polished finishes on stainless steel and
non-ferrous metals.
FIX Test Kit
FIX Starter Kit
Part Number: 80050U
1 VARILEX® WSF 1800, 110V, 5/8" spindle
1 Carrying Case
1 FIX backing pad - 4-7/16"
1 Wheel guard for discs up to 5"
3 FIX fleece discs 4-1/2"
(1 each - coarse, medium, fine)
1 EASY-LOCK SPEED NUT
2 FIX FLEECE TOP 4-1/2"
(1 each - grit 80, 180)
2 FIX flap discs 4-1/2" (1 each -grit 40, 60)
2 FIX SuperPolish discs 4-1/2"
1 FIX clean 4-1/2"
1 Lime spray can
4 FIX zircon discs 4-1/2"
(1 each - grit 40 - 120)
2 Mini-polishing pastes, white and blue
Part Number: 80051U
1 Carry Case
1 FIX backing pad
8 FIX Zirconium discs 4-1/2"
(2 each - 40, 60, 80, 120 grit)
10 FIX TZ Pyramid discs 4-1/2"
(2 each - 320, 400, 600, 1200, 2000 grit)
8 FIX Surface Conditioning discs 4-1/2"
(2 each - coarse, medium, fine, superfine)
6 FIX Super Polish discs 4-1/2"
2 Mini-polishing pastes, white and blue
1 PTX polishing cream pink
1 PTX Lime in a can
2 PTX microfiber cloths
1 Sample size PTX Poly Protection
1 Sample size PTX Brilliance Clean
Pre-grinding to remove scratches and level welds
using TZ Pyramid discs with grit A30.
Fine grinding using TZ Pyramid discs with grit A16.
These two stages prepare the surface for polishing.
TZ Pyramid is an aggressive abrasive, so there is no
need to slowly increase the grit fineness. Use only
contact pressure to grind – the weight of the grinder
is generally sufficient.
Pre-polish with SuperPolish disc
and white polishing compound.
Main polish with SuperPolish disc
and blue polishing compound.
Perfect mirror finish with SuperPolish disc
and pink cream.
Use a separate SuperPolish disc for each step – the different compound grits must not be mixed.
Remove compound and cream residues after each stage using POLY-PTX® lime and a microfiber cloth.
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
27
R E D U C E D S PA R K I N G G R I N D I N G D I S C S
REDUCED SPARKING
GRINDING DISCS
Designed for grinding steel, stainless steel and
other materials in nuclear plants, oil and gas
industries and applications where spark
reduction is an important feature.
Eco Brazing (EB) diamond grinding discs from CS Unitec
reduce sparking to 1% of that produced by resinoid wheels,
making EB diamond a better choice than resinoid for use in
some hazardous environments.
• Diamond grit protrudes higher off the EB diamond disc
than traditional diamond wheels, providing greater durability,
longer service life and ease in cutting
Benefits of reduced sparking:
• Workpiece visibility is improved,
allowing more accurate grinding
• Reduced fire hazard from sparks
• High-tensile steel backing disc reduces plate thickness for a
lightweight wheel that allows for high-rotation grinding
• High yield strength makes the steel backing disc elastic,
helping to ensure that operators do not grind the material
by over-removal
• Reduced sparking increases the visibility of the workpiece
• The EB diamond wheel wears approximately 1% as much
as a resinoid wheel, therefore significantly reducing the
amount of abrasive dust emitted
• Ideal for grinding steel and stainless steel, as well as
natural stone, granite, marble, fiberglass and other materials
EB DIAMOND DISC Specifications
Resinoid Grinding
Disc at 10,000 RPM
EB Diamond
Disc at 10,000
RPM
Dimensions
Diameter: 4", 7"
Max. speed
13,000 RPM (4") or 8500 RPM (7")
Ideal speed
6000 RPM (4") or 3300 RPM (7")
Grits
Arbor size
EB diamond grinding discs reduce sparking up to 1/100 of
that produced by resinoid grinding wheels (inset left).
Resinoid Grinding
Disc at 6000 RPM
EB Diamond
Disc at 6000
RPM
28
•
1-800-700-5919
30, 40, 50, 60, 80
7/8"
EB DIAMOND DISC Ordering Information
Order No.
Size (dia. x arbor)
Grit
Max. Speed
Quantity
EB4007830
EB4007840
EB4007850
EB4007860
EB4007880
4"
4"
4"
4"
4"
x
x
x
x
x
7/8"
7/8"
7/8"
7/8"
7/8"
30
40
50
60
80
13,000
13,000
13,000
13,000
13,000
1
1
1
1
1
disc
disc
disc
disc
disc
EB7007830
EB7007840
EB7007850
EB7007860
EB7007880
7"
7"
7"
7"
7"
x
x
x
x
x
7/8"
7/8"
7/8"
7/8"
7/8"
30
40
50
60
80
8500
8500
8500
8500
8500
1
1
1
1
1
disc
disc
disc
disc
disc
RPM
RPM
RPM
RPM
RPM
RPM
RPM
RPM
RPM
RPM
Though EB diamond discs have been shown to reduce sparking,
we make no claim that sparking will be eliminated. Follow all
appropriate safety regulations (ATEX, OSHA, ANSI) for all grinding
applications, including those for working in hazardous environments.
•
Visit our Web site at www.csunitec.com
REDUCED SPARKING DIAMOND
GRINDING AND CUTTING DISCS
Caution: User must follow all appropriate safety
regulations when choosing a tool for their
particular working environment.
• Last 100x longer than ordinary resin bonded wheels
• Reduce sparks, dust and material waste
• Save time changing discs
• Ideal for grinding and cutting steel, stainless steel, aluminum, titanium, fiberglass and more
EB Cut Off Wheels – "Slicer" for cutting metal and more
Eco Brazing (EB) diamond cutting wheels from CS Unitec are designed for cutting
steel and stainless steel pipe, tubing, bolts and plate, as well as composites,
fiberglass and other materials.
Size (dia. x arbor)
Grit
EBC4007850C
EBC4507830C
EBC4507850C
EBC5007850C
Order No.
4" x 7/8"
4-1/2" x 7/8"
4-1/2" x 7/8"
5" x 7/8"
50
30
50
50
13,000
13,000
13,000
13,000
EBC6007830C
EBC6007850C
EBC7007850C
EBC9007850C
6"
6"
7"
9"
30
50
50
50
8500
8500
8500
8500
x
x
x
x
7/8"
7/8"
7/8"
7/8"
Max. Speed
RPM
RPM
RPM
RPM
RPM
RPM
RPM
RPM
Quantity
1
1
1
1
disc
disc
disc
disc
1
1
1
1
disc
disc
disc
disc
EB Combination (Grinding – Cutter) Wheels
Eco Brazing (EB) diamond combination metal grinding and cutting wheels from CS
Unitec are designed for grinding and cutting steel and stainless steel bolts and plate.
Order No.
Size (dia. x arbor)
Grit
EB4007835CM
EB4007850CM
EB4507835CM
EB4507850CM
EB5007835CM
EB5007850CM
4" x 7/8"
4" x 7/8"
4-1/2" x 7/8"
4-1/2" x 7/8"
5" x 7/8"
5" x 7/8"
35
50
35
50
35
50
EB7007835CM
EB7007850CM
7" x 7/8"
7" x 7/8"
35
50
Max. Speed
13,000
13,000
13,000
13,000
13,000
13,000
RPM
RPM
RPM
RPM
RPM
RPM
8500 RPM
8500 RPM
R E D U C E D S PA R K I N G G R I N D I N G D I S C S
Follow all appropriate safety regulations (ATEX,
OSHA, ANSI, etc.) for all grinding applications,
including those for working in hazardous
environments. Follow all appropriate OSHA and
international safety regulations for grinding metal,
fiberglass, hard plastics and more.
Quantity
1
1
1
1
1
1
disc
disc
disc
disc
disc
disc
1 disc
1 disc
EB Cluster (Cleaning – Grinding) Wheels
Eco Brazing (EB) diamond cluster wheels from CS Unitec are designed for removing
paint, rust and epoxy on metal. Also for high material removal on fiberglass,
composites and plastics without loading up like traditional abrasives.
Size (dia. x arbor)
Grit
EB4007880CLSF
EB4507880CLSF
EB5007880CLSF
Order No.
4" x 7/8"
4-1/2" x 7/8"
5" x 7/8"
80
80
80
13,000 RPM
13,000 RPM
13,000 RPM
1 disc
1 disc
1 disc
EB6007880CLSF
EB7007880CLSF
6" x 7/8"
7" x 7/8"
80
80
8500 RPM
8500 RPM
1 disc
1 disc
•
1-800-700-5919
•
Max. Speed
Quantity
Visit our Web site at www.csunitec.com
29
PIPE GRINDING AND POLISHING
PIPE-MAX
Pipe Belt Grinder
The PIPE-MAX is a combination grinder and pipe belt sander.
The front hard rubber contact roller drives the abrasive belt to
grind flat surfaces. It removes weld seams in a straight line,
without leaving edges or a wavy finish.
For sanding pipes or handrails, it is a flexible tool. The sanding
belt follows every contour to grind and polish up to a highgloss finish. The belt wraps around the pipe and requires only
a few steps to polish the entire circumference. It is ideal for
stainless steel, aluminum and high-quality metals.
• For sanding pipes from small to large
diameter, up to 14"
• Grinds weld seams on flat surfaces –
leaves no edges
• Powerful 15 Amp motor and variablespeed control from 950 to 3500 RPM
• Quick and easy changing of
sanding belts
• Ideal for stainless steel and aluminum
You can follow the external contour of the pipe diameter with light, uniform contact pressure.
The new contour concept with the elastic return roller allows the grinding and polishing belts to
conform around the external diameter of the pipes without great force.
2
2
1
Gas pressure cylinder allows Additional handle for
belt to conform to contour of comfortable, overhead
pipe with proper pressure.
working.
3
The drive roller with the
rubber rings ensures that the
grinding belts will not slip.
1
3
The soft grinding roller made of PUR material
also allows comfortable longitudinal grinding
of flat surfaces, for example to remove spot
welds or eliminate deep scratches.
Pneumatic Pipe Sander also available.
(LBR1506 AIR)
See price list for details.
Standard Equipment
PIPE-MAX Specifications
Order Number: 38502A
Belt size (L x W)
30.7" x 1.5"*
1 PIPE-MAX basic machine, 110 V
2 PIPE-MAX SC-fleece belts, medium
Belt speed
33 - 100 ft./sec.
1 QUICK-LOCK cable, 13 feet
2 PIPE-MAX SC-fleece belts, fine
Power
15 Amp (1710 Watts) 110V
1 additional handgrip
3 spare rubber rings
Pipe ø max.
14"
PIPE-MAX grinding belts, 2 each grits 40, 60, 80 and 120
Weight
11.25 lbs.
220 Volt also available. * Note: Exact belt size is 40mm x 780mm
PIPE-MAX Accessories
All PIPE-MAX Belts shown below: Belt Size – 30.7" x 1.5" (780mm x 40mm) • 10 belts per package
Abrasive
Grinding Belts
Abrasive Surface
Conditioning Fleece Belts
Abrasive Grinding
Belts – Ceramic
Grit
24
40
50
60
80
120
Grit
Coarse (brown)
Medium (red)
Fine (blue)
Superfine (grey)
Grit
24
36
40
60
80
100
Part No.
38523
38524
38525
38526
38528
38529
Part No.
38531
38532
38533
38534
Part No.
38124
38136
38140
38160
38180
38100
TZ Pyramid Belts
SuperPolish Belt
Grit
A100/220
A65/320
A45/400
A30/600
A16/1200
Part No.
Part No.
38544
38545
38546
38547
38548
QUICK-LOCK Cable (Qty: 1) Length: 13 ft. (standard, included)
30
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
38850
BOA
PIPE SANDER
PIPE FINISHING AND POLISHING
Electric or Pneumatic
All-around polishing
solution for handrails,
pipe and tubing.
The LRP 1503 Boa Pipe Sander is the perfect solution for sanding and
polishing pipe constructions. The sanding arm snakes up to 270˚ around the
radius of the pipe. The operator simply rotates the BOA slightly to achieve
a full 360˚ finish. Spring resistance between the deflection rollers
ensures that the sanding arm and belt are always uniformly
tensioned. The BOA saves time finishing stainless steel and
other ferrous and nonferrous pipe.
LRP 1503 VRA
with sanding belt
• Variable-speed control; 12 to 40 ft./sec. belt speed
• Maximum pipe Ø : 5" diameter
Electric
or Pneumatic
• Quick, tool-free replacement of sanding belt
• High-quality 270˚ sanding arm is made of light alloy with
two deflection rollers for quick progress, perfect finish and
simple operation
BOA Accessories
• Additional side handle can be rotated 180˚ in narrow spaces
Standard Equipment
Electric BOA Pipe Sander
Order Number: LRP 1503 VRA
Power
Belt speed
Belt dimensions
Weight
11 Amp
1 carrying case with padding
12 - 40 ft./sec.
1 abrasive grinding belt, grit 80, 30" x 1-1/2"
30" x 1-1/2" or 3/4"*
8.2 lbs.
1 abrasive grinding belt, grit 220, 30" x 3/4"
1 surface conditioning fleece, fine, 30" x 1-1/2"
Pneumatic BOA Pipe Sander
1 surface conditioning fleece, medium,
LRP 1503 AIR
Power
Belt speed
Air consumption
Weight
1 abrasive grinding belt, grit 120, 30" x 3/4"
30" x 1-1/2"
1 HP
28 ft./sec.
1 super polish belt, grit 600, 30" x 1-1/2"
20 CFM @ 90 PSI
1 super polish belt, grit 1500, 30" x 1-1/2"
8 lbs.
* Note: Exact belt size is 760mm x 40mm or 20mm
•
1-800-700-5919
•
Abrasive grinding belt (10/pkg.)
Size
Grit
Part No.
326 706
30" x 1-1/2"
24
30" x 1-1/2"
36
326 712
30" x 1-1/2"
60
326 723
30" x 1-1/2"
80
326 739
30" x 1-1/2"
120
326 755
30" x 1-1/2"
220
326 771
30" x 3/4"
120
326 801
30" x 3/4"
220
326 836
Surface conditioning fleece
(3/pkg.)
Size
Grit
30" x 1-1/2" Coarse (brown)
30" x 1-1/2" Medium (red)
30" x 1-1/2"
Fine (blue)
belt
Part No.
326 895
326 879
326 852
Sanding-Polishing Belt (1/pkg.)
For high-gloss polishing, without polishing
agents, in two steps
Size
Grit
Part No.
30" x 1-1/2"
600
326 917
30" x 1-1/2"
1500
326 933
Visit our Web site at www.csunitec.com
31
FINGER BELT SANDER/GRINDER/POLISHER
FINGER BELT SANDER Variable-speed
Ideal for angles and tight spaces, as well as pipes and
curves. The swivel-mounted arm, with 140˚ flexibility,
reaches into corners, grooves and folds.
The LBS 1105 VE finger belt sander saves time grinding in confined and
difficult areas. It uses belt sizes 3/16" to 1-1/8" wide by 21" long. The
sanding arm rotates up to 140˚ for reaching into corners, grooves and folds,
including pipes and curves.
The finger sander is ideal for grinding, blending, polishing and
deburring ferrous and nonferrous metal. It also works on wood,
plastic, fiberglass and other material. Speed is adjustable
from 13 to 39 ft./sec.
LBS 1105 VE with
3/8" sanding arm.
Interchangeable 1-1/8"
arm shown at right.
Finger Belt Sander Accessories
Abrasive sanding belt (10/pkg.)
Size
Grit
Part No.
303 615
3/16"
60
3/16"
120
303 623
3/8"
3/8"
3/8"
3/8"
40
60
120
220
257
257
257
257
101
105
102
103
1-1/8"
1-1/8"
1-1/8"
60
120
220
255 328
255 329
255 330
Surface conditioning fleece belt
(3/pkg.)
Size
Grit
Part No.
3/8"
Medium (red)
318 663
3/8"
Fine (blue)
318 671
1-1/8"
1-1/8"
Medium (red)
Fine (blue)
318 647
318 655
SuperPolish Belt (1/pkg.)
For high-gloss polishing, without
polishing agents, in two steps
Size
Grit
Part No.
318 132
1-1/8"
600
1-1/8"
1500
318 140
Narrow filing arm and 140˚
adjustability allow sanding
and grinding in confined
and difficult areas.
Finger Belt Sander Specifications
Standard Equipment
Order Number: LBS 1105 VE
Belt speeds
13 to 39 ft./sec.
Motor
6.1 AMP
Weight
5.5 lbs.
(1) 3/8" sanding arm (pointed) –
Part No. 256 525
(1) abrasive belt kit, grits
40/120/220 – 1 set
(1) side handle – 194 034
Optional Equipment
(1) hexagon socket screw key –
115 460
(1) 3/8" sanding arm (curved) –
Part No. 256 532
(1) 1-1/8" sanding arm (large roller) –
Part No. 258 888
32
•
Standard equipment includes
a metal carrying case.
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Gladius® 1800 Multifunctional Grinder
Ideal for hard-to-reach areas such as corners, angles and tight spaces.
• Long, sword-shaped, belt-driven tool for finishing hard to reach
areas
• Infinitely adjustable speed control from 1000 to 3800 RPM
• Tachogenerator provides constant speed, even under load
• Innovative design allows use of the full length of both sides
of the arm for smooth grinding, blending and polishing
• Integrated dust extraction port reduces airborne particles
when connected to an industrial vacuum
The Gladius® 1800 uses
the same abrasive belts as
the PIPE-MAX.
See page 30 for more
information.
Gladius®
Gladius® 1800 Specifications
Order Number: 38651A
1800 Professional Kit
Professional Kit includes:
Gladius® basic machine
(110V), QUICK-LOCK power
cord, machine stand,
2 SC-fleece belts (medium),
2 SC-fleece belts (fine), 2
each grinding belts – 40, 60,
80 and 120 grit, aluminum
carrying case. (P/N 38652A)
Belt size (L x W)
30.7" x 1.5"*
Power
15 Amp / 110V
Speed
1000 - 3800 RPM
Weight
10 lbs.
* Note: Exact belt size is 40mm x 780mm
Convert the Gladius® 1800 to a bench-mounted grinder with
optional machine stand for precision grinding and polishing.
Optional stand:
P/N 38660
➔
TIPS & TRICKS
EASY-LOCK SPEED NUT SAVES TIME, WEIGHT AND MONEY!
Never has changing a grinding disc been so quick and efficient
The secret behind it – the self-clamping EASY-LOCK SPEED NUT
P/N 65008-1 (5/8"-11 UNC)
The EASY-LOCK SPEED NUT allows abrasive discs to
be changed in seconds without tools. The SPEED NUT
works with any abrasive with a hemp or ABS backing
plate and a 7/8" arbor. That means you can change
abrasives on an angle grinder in a matter of seconds. It
easily hand tightens and eliminates the need for
wrenches or heavy, expensive 5/8"-11 hubs.
The clamping collar shape on
the top of the EASY-LOCK
SPEED NUT can secure flap
discs and abrasives with a "thicker" backing disc as well
as centering them. "Thin" abrasives such as cutting discs,
etc. can simply be secured using the reverse of the EASYLOCK SPEED NUT clamping nut.
MULTIFUNCTIONAL GRINDER / SANDER WITH DUST EXTRACTION
• Grind, deburr, blend and polish ferrous and non-ferrous metals,
wood and plastic
1. Secure the disc loosely by
hand using the SPEED NUT.
2. Press the spindle lock and tighten
the disc by turning it clockwise by
hand. That’s all there is to it!
1.
2.
3.
•
1-800-700-5919
•
3. To release the disc, press the
spindle lock and turn the disc
counter-clockwise by hand.
Visit our Web site at www.csunitec.com
33
ANGLE GRINDERS / SANDERS WITH DUST EXTRACTION
Angle Grinders / Sanders
with Dust Extraction
L 1506 VV 4" and 4-1/2", Electric
Extremely powerful 11 Amp angle grinder and sander
with variable-speed electronic motor. Vacuum port:
1-1/4". Ideal for use with our CS 1445 H, CS 1225 or
CS 1500 Dust Extraction Vacuum (see below).
L 1506 VV with dust
extraction
L 1506 VV AIR 4" and 4-1/2", Pneumatic
Extremely powerful 1 HP angle grinder and sander
with 1 HP pneumatic motor. Vacuum port: 1-1/4".
Ideal for use with our CS 1445 H, CS 1225 or
CS 1500 Dust Extraction Vacuum (see below).
(2200 to 6800 RPM)
5/8" Spindle
7/8" Arbor
Vacuum Port: 1-1/4"
L 1506 VV AIR
L 1506 VV Specifications
L 1506 VV
(6000 RPM)
(Hose not
included)
L 1506 VV AIR
Max. diameter 4-1/2"
4-1/2"
Speed 2200 - 6800 RPM
6000 RPM
Power 11 Amp
1 HP
Spindle 5/8"-11
5/8"-11
Weight 4 lbs.
4 lbs.
Air consumption –
Stepped Adapter
(optional) adapts
vacuum port to a
1-1/4" dia. hose
33 CFM @ 90 PSI
Air connection –
5/8" Spindle
7/8" Arbor
Part Number: 5.453-016
1/4"
Electric-Powered Dust Collection Vacuums with HEPA Filtration
CS Unitec's wet/dry dust extraction vacuums
offer strong 130 CFM air flow and an
electromagnetic pulse filter cleaning system
Model CS 1445 H
to maximize vacuum power and dust collection.
(shown at left)
• Ideal for use with power tools
automatically
"Power
"pulse" cleans
take-off"
• 99.999% HEPA filtration efficiency of particles
filters without
outlet
down to 0.3 microns; automatic filter cleaning
interrupting
• "Power Take Off" outlet activates the vacuum
operation!
ON/OFF from the power tool switch
CS 1225 H
• Non-HEPA models available, 99.930%
filtration efficiency
Optional Filter Bags
• Kit available to connect two power
Paper filter bags for CS 1225 and CS 1445 - P/N 416014 (5-pack)
tools (P/N 198804)
Plastic filter bags for CS 1225, CS 1445 and CS 1500 - P/N 421742 (5-pack)
Paper filter bags for CS 1500 - P/N 416021 (5-pack)
Slurry filter bags for CS 1500 - P/N 420592 (3-pack)
HEPA Vacuum Specifications
Power
Air flow
Tank capacity
Weight
Filter P/N (2pk.)
CS 1225 H
CS 1500 H CS 1445 H
11 Amp
130 CFM
6.6 gal.
24.3 lbs.
428956
11 Amp
130 CFM
13 gal.
35.2 lbs.
428956
Standard Vacuum Specifications
11 Amp
130 CFM
9 gal.
24.3 lbs.
428956
Power
Air flow
Tank capacity
Weight
Filter P/N (2pk.)
CS 1225
CS 1500
CS 1445
11 Amp
130 CFM
6.6 gal.
24.3 lbs.
416069
11 Amp
130 CFM
13 gal.
35.2 lbs.
416069
11 Amp
130 CFM
9 gal.
24.3 lbs.
416069
We make no claim that use of a vacuum will eliminate contaminants. Wear an approved respirator mask and follow all appropriate OSHA safety regulations for
proper ventilation, dust handling, eye protection, etc. when using a dust extraction grinder and vacuum.
34
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
Electric Grinder/Sander
This powerful 11 Amp, full-wave electronic grinder/sander has infinitely adjustable
variable speeds (2200 to 6800 RPM) and overload protection. It is a versatile tool
that is ideal for grinding, roughing, cutting, deburring and rust removal. This is
a popular choice among the metal, automotive and natural stone industries.
Electric Grinder/Sander Specifications
L 1506 VR
Max. diameter
5"
Speed
2200 - 6800 RPM
Power
11 Amp
Spindle thread
5/8"-11
Weight
L 1506 VR
(2200 to 6800 RPM)
4.2 lbs.
Pneumatic Angle Grinder
4-1/2" and 5"
1 HP mini grinder with 5/8" spindle
The L 1509 AIR is a powerful, lightweight pneumatic angle grinder
for grinding, cleaning, deburring, blending and smoothing. This
lightweight, versatile angle grinder is ideal for use in the most
demanding grinding and sanding applications.
ANGLE GRINDERS / SANDERS / POLISHERS
L 1506 VR 4-1/2" and 5"
Compact, high-torque, variable-speed grinder/sander
L 1509 AIR
(6500 RPM)
Pneumatic Angle Grinder Specifications
Order Number: L 1509 AIR
Power
1 HP
Speed
6500 RPM
Max. diameter
Air consumption
Air connection
Weight
• Heavy-duty pneumatic motor (1 HP / 6500 RPM) stands up to
continuous use
• Accepts both 4-1/2" and 5" grinding discs
5"
33 CFM @ 90 PSI
1/4"
• Spindle size: 5/8"-11 UNC
• Arbor size: 7/8"
• Removable side handle can be mounted on either side of the tool
4.25 lbs.
• Spindle lock
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
35
Low-speed Polishers
POLISHING TOOLS
For metal, stone, concrete, plastic, glass and more.
CS Unitec offers several polishing tools for both dry and wet applications. These tools feature either double or triple
gear reduction for maximum torque with minimum motor load and a longer service life.
ELP 1300 Dry Polisher
Removable handle
Triple gear reduction, 650 to 1150 RPM.
CS Unitec’s ELP 1300 polisher is the ideal tool for low-speed dry
polishing, especially under heavy load. In combination with various
accessories, the ELP 1300 can be used for automotive, wood and
ELP 1300 (650 to 1150 RPM)
metalworking applications such as polishing, fine brushing, matte
finishing and sanding. This polisher is particularly suited for materials such as acrylic lacquer, glass, plastics and corian.
• Triple transmission reduction for
maximum torque with minimum motor
load and a long lifetime
Dry Polisher
Order Number: ELP 1300
• Compact, nonslip handle balances weight
distribution and minimizes vibrations
• Cover sheet for ventilation on the motor
housing provides added dust protection
• Slim design for use in narrow spaces
• Ergonomic on/off switch with locking button
EPN 1310 P Wet Polisher
EPO 1310 Dry Polisher
12 Amp (1300 W)
110 V / 60 Hz
(Also avail.: 230 V / 50 Hz)
Speed
• Spindle stop for fast retooling
Powerful 12 Amp motor is ideal for slowspeed polishing in the automotive and
furniture industries.
Power input
650 - 1150 RPM
Max. diameter
9"
Spindle thread
5/8"-11
Weight
6.4 lbs.
Removable compact nonslip handle
Double gear reduction.
The EPO 1310 is a powerful polisher for dry applications such as sanding
EPN 1310 P shown above
and polishing metal, stone, concrete and other materials. When used with
diamond sanding discs and velcro fastener, it is effective for sanding edges
Dry Polisher
and stone polishing within the workshop or at the construction site. Integrated
dust protection for both motor and gear bearings.
Order Number: EPO 1310
The EPN 1310 P wet polisher for natural stone and concrete applications is
particularly suited for grinding and polishing edges and curvatures. It also
excels at removing scratches from granite, marble
and concrete. This polisher is ideal for stone cutters,
natural stone processing companies and concrete
fabricators. Features external water supply below the
motor to protect the gearbox and facilitate easy gear
head guiding; no water flows across the motor or
gearbox. GFCI switch, sealed motor and protected
electronic components.
• Double gear reduction for maximum performance
with minimum motor load and a long service life
Power input
(Also avail.: 230 V / 50 Hz)
Speed
5"
Spindle thread
5/8"-11
Weight
Order Number: EPN 1310 P
Power input
12 Amp (1300 W)
110 V / 60 Hz
(Also avail.: 230 V / 50 Hz)
3 speeds
• Ergonomic on/off switch with locking button
CS Unitec...
Powered by Eibenstock
•
1300 / 2175 / 3075 RPM
Max. diameter
5"
Spindle thread
5/8"-11
Weight
1-800-700-5919
5 lbs.
Wet Polisher
• Slim design for use in narrow spaces
•
1300 - 3050 RPM
Max. diameter
• Spindle stop for fast retooling
36
12 Amp (1300 W)
110 V / 60 Hz
6.4 lbs.
Visit our Web site at www.csunitec.com
Surface Preparation Equipment
Electric and air power for the preparation of concrete, steel and stone.
Contact us for more information about our new line of surface preparation equipment.
Hand-held ScaleForce Scaling
Hammers and Deck Hammers
Up to 33,000 blows per minute
Ideal for breaking down the hardest of coatings prior to abrasive
blast cleaning, reducing cost of blast media and increasing
surface preparation productivity. Widely used in the marine
Trelawny™ – ScaleForce
industry for removing rust, scale and paint from ship
decks, as well as to descale tanks, bridge decks and floating platforms. Low vibration for
operator comfort. Options include spark-resistant replacement heads for use in potentially
hazardous environments and vacuum shroud to reduce dust.
Peening Preparation Tools – Hand-held Scarifiers
Clean, economical alternative to small-area shot blasting
The PPT line of handheld scarifiers use 3M™ Heavyduty Rotopeen™ captive shot flaps or steel cutters
for surface preparation. These units are ideal for
the removal of alkyds, mastics, adhesives and
coatings corrosion from a range of steel and
concrete substrates. When part of a dust collection
system, these tools more safely remove hazardous
materials such as lead-based paints and contaminated
particles quickly and cleanly.
Rotopeen™
P N E U M AT I C A N D E L E C T R I C S U R FA C E P R E PA R AT I O N T O O L S
CS Unitec now offers even more innovative electric and pneumatic equipment for the
preparation of steel, concrete and stone. These tools are ideal for industries, including:
construction, floor preparation, utilities, marine & offshore, oil & gas, and nuclear
decommissioning/remediation, as well as restoration, refurbishment and demolition.
Needle/Chisel Scalers
Trelawny™ original Vibro-Lo™ low-vibration scalers
Lightweight, easy-to-handle pneumatic units provide up
to 3000 blows per minute to remove coatings, corrosion
and other accumulated materials. Ideal for all surfaces,
especially irregular surfaces that are otherwise difficult to
prepare. Also used for chipping, weld dressing and
brick/stone cleaning. Optional in-line dust control
systems to maintain worksite/environment cleanliness.
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
37
S H E E T M E TA L D E B U R R I N G M A C H I N E
ROLEI® BE 5 Sheet
Metal Deburring
Machine – 2 Speeds
Double-sided deburring of sheet metal up to 0.2"
thick can be achieved in a single operation with no
additional treatment. The machine’s flap wheels can
be easily adjusted as they wear. One set of wheels
lasts for approximately 6500 feet of stainless steel
sheet. Supplied standard with two 80 grit flap
wheels, the ROLEI® BE 5 can be used with other
optional grits to suit the facet width and materials of
your particular application.
Features two-speed operation:
Speed 1: fine deburring, 600 RPM
Speed 2: standard deburring, 1200 RPM
Optional accessories:
• Spare flap wheels (40, 60, 80, and 120 grit)
• Machine stand, made from strong steel
• Port for industrial dust extractor (part no. 30330)
ROLEI BE 5 Specifications
Order Number: 30310A (220 Volt)
30310 (380 Volt)
3-phase motor
Can also be used on its side with
roller tables for large thin sheets.
Dimensions
Weight
Options
220 - 240 V 3-phase / 2 speeds
.2 KW / .9 Amp
380 V 3-phase / 2 speeds
.2 KW / .45 Amp
19.7" x 12.8" x 7.9"
64 lbs.
Machine stand, dust extractor
connection port, teflon tape
ROLEI BE 5 Flap Wheels
Part No.
Deburring on
both sides of
the sheet edges
37040
37060
37080
37120
Sheet with burr
after cutting
Spare flap wheels for sheet
metal deburring machine BE 5
Grit 40, 60, 80, 120
38
Machine stand - P/N: 30320
Strong steel machine stand with
black powder coating
•
1-800-700-5919
Dust extraction port (end and
bottom views shown above)
P/N: 30330
•
Grit
40
60
80
120
Qty.
2
2
2
2
discs
discs
discs
discs
per
per
per
per
pack
pack
pack
pack
Teflon protective tape - self-adhesive
(2 required)
P/N: 30340 (19.75" length x 3/4" width)
P/N: 30341 (27.5" length x 3/4" width)
For extension rail to protect
from scratching the workpiece
Visit our Web site at www.csunitec.com
This handy deburring machine is designed for awkward,
heavy parts, such as machine tables, frame constructions or
large sheets of metal. Easy to handle, with good edge control.
The EF 115 is also ideal for chamfering welds. Fixed beveling
angle of 45˚, infinitely adjustable facet width from 0" to 3/8".
The handy
ROLEI® EF 115 can
deburr and facet large,
heavy parts with ease.
The precise edge control
guarantees clean bevels
at an angle of 45˚.
Rolei EF 115
110 V / 60 Hz
Variable speed: 2,000 to 7,600 RPM
QUICK-LOCK cable for fast,
easy replacement, e.g. if the
cable is damaged
ROLEI EF 115 Specifications
Order Number: 30116
Universal motor
Speed
Weight
Options
HAND-HELD DEBURRING AND FACETING MACHINE
ROLEI® EF 115
Hand-held Deburring
and Faceting Machine
10 ft., included.
12.27 Amp (1350 W) 110 V / 60 Hz
(230 V / 50 Hz, 1600 W also available)
Infinitely adjustable
from 2,000 to 7,600 rpm
Simple disc changing
9 lbs.
Sliding guide rail, plastic
(P/N 30117, 2-piece set)
ROLEI EF 115 Flap Discs
Part No.
Grit
Qty.
21050A
21060A
21080A
21120A
50
60
80
120
10
10
10
10
discs
discs
discs
discs
•
per
per
per
per
pack
pack
pack
pack
1-800-700-5919
•
Visit our Web site at www.csunitec.com
39
ROLEI® EF 165
Beveling and deburring machine
for facets at an angle of 45˚
Optional dust
extraction port
P/N 30130
Beveling and deburring machine with a fixed
beveling angle of 45˚ and an infinitely adjustable
beveling width from 0" to 3/8" for all metals from
stainless steel to aluminum. Precise adjustment of
the face width using a hand wheel.
Rolei EF 165
Speed: 2800 RPM
Optional accessories:
• Table extension (P/N 30110, 2 pieces, 5" x 13" each)
• Machine stand (P/N 30120)
• Extraction port for industrial dust extractor (P/N 30130)
• Spare flap discs (60, 80, 120 grit)
Machine stand
P/N 30120
Sturdy steel machine stand with
black powder coating.
ROLEI EF 165 Specifications
Order Number: 30101 (220 Volt)
30100 (380 Volt)
Extended support table
P/N 30110
Made of sliding grey cast material.
27-1/2" long
Motor
Support table
Dimensions
Spare flap discs
Weight
The flat disc with special hard
compression for deburring
machines. Self-sharpening and
extremely long service life!
Options
60 Grit P/N 36060
80 Grit P/N 36080
120 Grit P/N 36120
40
•
1-800-700-5919
220, single-phase
or 380 V, 3-phase
5" x 13"
14" x 13" x 12"
40 lbs.
Table extension, machine stand,
extraction port for dust extractor
connection
Supplied as standard with 80 grit disc. Other grits can also be used
to suit the face width and materials.
•
Visit our Web site at www.csunitec.com
ROLEI® PEF 500
Precision beveling and faceting machine for all
metals from stainless steel to aluminum. Infinitely
adjustable beveling angle from 30˚ to 60˚ and
infinitely adjustable face width from 0" to 3/8"
(precise adjustment using knob).
Optional accessories:
• Extraction port for dust (P/N 30230)
• Sliding feed plate, plastic (P/N 30210)
• Spare flap discs (see below right)
Rolei PEF 500
Speed: 2800 RPM
Parts are beveled with
perfect cross-grinding –
absolutely no opposite burr.
BEVELING & DEBURRING MACHINES
Beveling and deburring machine for
facets at angles of 30˚ to 60˚.
The face width can be
adjusted precisely using a
hand wheel.
The disc wear is adjusted
using a hand wheel with a
threaded spindle. The face
angle can be adjusted
using a motorized system.
ROLEI PEF 500 Specifications
Order Number: 30201 (220 Volt)
30200 (380 Volt)
Motor
Dimensions
Weight
Options
The easily interchangeable
flat flap disc produces a
chamfer which creates
zero opposite burr.
220, single-phase
or 380 V, 3-phase
Spare flap discs
60 Grit P/N 36060
80 Grit P/N 36080
120 Grit P/N 36120
20" x 14" x 14"
88 lbs.
Machine stand, extraction port
for dust extractor connection
Infinitely adjustable
facet angle from 30˚ to 60˚
Supplied as standard with 80 grit disc. Other grits can also be used
to suit the facet width and materials.
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
41
Multipurpose Beveling Machine
Bevel, deburr and chamfer edges of steel plate
faster and cleaner than angle grinders.
The EKF multipurpose beveling machine is designed to bevel 30˚ or
45˚ weld seams on steel, stainless steel, nonferrous metals, brass
and plastics. It can also be used to deburr and chamfer; straighten
edges, internal and external radii; and countersink holes from 7/8"
diameter.
• Fine adjustment feature for slight chamfers when deburring for the
preparation of weld seams
• Three milling head options – 30˚, 45˚ and 2.5mm
• Ideal for the following applications: Moldmaking (straighten edges,
internal and external radii and countersink holes from 7/8" dia.);
Boiler and process plant construction (prepare weld seams on
heat exchangers); Mechanical engineering (deburr machine parts,
chamfer edges to protect against paint peeling and create visible
edges); Sheet metal (deburr cut edges)
One Machine, Three Milling Options
30˚
EKF 300.3
Milling cutter 30°,
Chamfer 0 - 1/4"
45˚
R 2.5 radius
EKF 450.3
Milling cutter 45°,
Chamfer 0 - 1/4"
EKF 452.3
Milling cutter 2.5mm
radius (optional)
Cutting Plates - Sold as pack of 10
Order No. SHM 200: 30˚ and 45˚
Order No. SHM 200-E: 30˚ and 45˚ for stainless steel
Order No. SHM 202: 2.5mm radius
Standard equipment includes
milling head and two inserts,
SW22 key, carrying case and
user’s manual. Please see our
Price List for available
accessories.
Fine adjustment
Precise control of
chamfer when
deburring for weld
seam preparation
Portable Beveler Specifications
Order Number:
EKF 300.3
EKF 450.3
EKF 452.3
Beveling angle*
30˚
45˚
2.5mm
Bevel width (max.)**
1/4"
1/4"
1/4"
Motor power/Voltage
13.5 Amp/110 V (220 V / 50 Hz also available)
Cutting speed
3000 SFPM
Cutting Inserts
3
Dimensions (L x W x H)
12-1/2" x 5-1/2" x 11-5/8"
10.5 lbs.
Weight
The optimum fixture for stationary
deburring of small parts (Order No. ZKF 100)
* EKF milling heads are interchangeable.
** Max. bevel width may require several passes, depending on material hardness
42
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
AutoCUT 500 Automatic
Edge Processing Machine
Fast, easy preparation of weld seams
and bevels on plate or pipe
Powerful, self-guiding beveling machine
for 15˚ to 60˚ edges on plate
up to 1.5" thick
• Bevel 15˚ to 60˚
angles and land
width up to
3/4" on steel,
stainless steel, aluminum
and nonferrous metal
plates and pipe
• Work on welding angles
and weld preparation
SKF 025
on pipes/tubes with a
minimum OD of
6-1/4" (160mm) with built-in pipe roller guide; ideal for
beveling pipe 6-1/4" OD and larger
• Robust design, single operator control and easy
handling
• Bevel 15˚ to 60˚ angles and land width up to
1-3/16" on steel, stainless steel, aluminum and
nonferrous metal plates and pipe
• Anti-vibration system for operator comfort
• Unit propels itself on the plate, no need for
a cart or stand
P O RTA B L E B E V E L I N G M A C H I N E S
SKF Beveling Machine
for Plates and Pipes
• Automatic feed and return
• Reversible carbide cutting inserts
Standard equipment includes one milling head, 12
sintered carbide reversible cutting inserts, tools for assembly,
built-in pipe roller guide, steel carrying case and user’s
manual. Please see our Price List for available accessories.
Cutting Plates - Sold as pack of 20
Order No. SHM 800: for beveling carbon and
stainless steel
Portable Beveler Specifications
Automatic Edge Processing Machine Specifications
Order Number: SKF 025
Order Number: AutoCUT 500
Beveling angle Bevel
width (max.)**
15˚ - 60˚
3/4"
Motor power
10 Amp
(220 V / 50 Hz also available)
Cutting speed
1800 SFPM
Cutting inserts
12
Dimensions (L x W x H)
Weight
15˚ - 60˚
Bevel width (max.)**
1-3/16"
Motor power
10 Amp
Voltage
110 V
Voltage
Beveling angle
Cutting speed
2750 SFPM
Cutting inserts
6
Dimensions (L x W x H)
16-1/2" x 13" (L x H)
Weight
43 lbs.
230 V, 3-phase
23-1/2" x 24" x 20-1/2" (L x W x H)
110 lbs.
** Max. bevel width may require several passes, depending on material hardness
** Max. bevel width may require several passes, depending on material hardness
•
1-800-700-5919
•
Visit our Web site at www.csunitec.com
43
Also Available from CS Unitec
CS Unitec, Inc. specializes in industrial power tools and safety tools for construction and industry.
Innovation and high quality are synonymous with CS Unitec's power tools. In 1991, the company invented the first pneumatic
portable band saw. CS Unitec has added to its list of industry firsts with the widest range of portable magnetic drills and hand-held
concrete core drills. The line also includes surface preparation tools for metal, concrete and masonry, air, electric and hydraulic
portable band saws, reciprocating saws, hack saws, nut runners, rotary hammer drills, rolling motors, non-sparking safety tools,
portable mixers and dust extraction vacuum systems.
… the power of innovation! ®
For tool specifications and ATEX and Ex Zone
information, visit www.csunitec.com.
View demo videos at
www.csunitec.com
Call 1-800-700-5919 or 203-853-9522 to request
any of the catalogs shown below.
Concrete Tools:
Metalworking Tools:
Portable Mixers:
Portable Saws:
Surface Preparation Tools,
Concrete Grinders, Dust
Collection Systems, Diamond
Core Drills, Air Concrete Saws
and more
Surface Preparation Tools, Dust
Collection Systems, Dry Cutting
Portable Saws, Portable Magnetic
Drills, Bridge Reamers and more
Portable Mixing Machines for
Mortar, Concrete, Plaster,
Flooring Adhesives, Grout,
Coatings, Paint, Self-Leveling
Compounds and more
Hacksaws, Reciprocating Saws,
Band Saws, Chain Saws, Cut-off
Saws and more
ALL PRODUCTS ARE
AVAILABLE THROUGH
EIBENSTOCK’S EXCLUSIVE
AGENT FOR NORTH AMERICA
Portable Magnetic Drills:
Surface Finishing Tools:
Non-Sparking Hand Tools:
Concrete & Masonry Tools:
Magnetic Drills & Accessories
Hand-held Drills and Drive Units
Nut Runners
Hammer Drills and more
High-performance tools and
accessories for grinding, sanding,
polishing, deburring and beveling
stainless steel, steel, nonferrous
metals, wood and more
Non-sparking Hand Tools
Power Tools for use in Ex Zones,
ATEX Zones and Hazardous
Environments
Power tools for the professional
contractor to drill, cut, grind and
smooth concrete, masonry, wood,
drywall and more – includes dust
collection tool systems
CS UNITEC, Inc.
22 Harbor Avenue, Norwalk, CT 06850
Phone 800-700-5919 • 203-853-9522 • Fax 203-853-9921
Email [email protected] • www.csunitec.com
View product demonstrations
at www.csunitec.com.
ALL SPECIFICATIONS ARE SUBJECT TO CHANGE
© Copyright 2014, CS Unitec, Inc., 10-14-7.5M rev3/21/16
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement