Appearance and Components
Front View(eg.:iD4P)
Quick Start Guide
iD4P
iD4S
Display
Power Bu�on
Opera�on Keys
Printer Cover
Status Indicator
Feed Bu�on
Cover Open Levers
Rear View
USB Port (Type A)
Ethernet Port
USB Port (Type B)
Power Receptacle
Serial Port
！Note: The views above are for your reference. Ports vary by
your choice.
Xiamen Hanin Electronic Technology Co.,Ltd.
ADD: 5F, 8#, Aide Airport Industrial Park, Huli District, Xiamen, China.
Inside View
TEL：400-806-9290
WEB：www.idprt.com
Moveable Roll Holders
Packing List
Kick-stand Cover Lock
Locking Tab
Printer(eg:iD4P)
AC Adapter
Moveable Label Guides
Label Sensor
Platen
Label Roll
Power Cord
USB Connec�on
Quick Start Guide
1.Connect the AC adapter to power receptacle.
2.Connect the power cord to AC adapter.
CD
Quick Start Guide
USB Cable
3.Connect the other end of power cord to the outlet.
1
2
3
！Note: The packing materials are actually based on the order.
Varies by regions
Loading the Ribbon
1.Pull and li� the cover. (eg:iD4P)
2.Pull the roll holders open and place the roll between them.
3.Press down the locking tab.
4.Pass the label through the label guides, then adjust guides
to adapt to the label width.
5.Press the cover lock and close the cover slightly.
6.Press down the cover un�l it snaps closed.
！Note: Please refer to windows driver installa�on in iD4 Series User Manual.
">
