TESTO Vane anemometers, 417 Owner's Manual

Testo Vane Anemometers, 417, is a compact instrument for measuring flow velocities and temperature. Ideal for indoor volume flow measurements at outlets (with optional funnel accessories) and temperature measurement of flows. It features a built-in 100mm vane and temperature sensor, offering convenient and precise measurements. The device connects to the testo Smart App via Bluetooth for data logging, analysis, and configuration.

PDF Download
Document
Testo 417 Vane Anemometer Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Compact design
  • Integrated 100mm vane
  • Temperature sensor
  • Bluetooth connectivity
  • Multi-point/continuous mean calculation
  • Max/Min value recording
  • Data printing capability
  • App control & configuration

Frequently asked questions

Press the On/Off key for 0.5 seconds. The current reading will be displayed.

Enter configuration mode (press MENU/ENTER). Navigate to "UNITS" using the arrow keys, select metric or imperial, then set units for velocity and volume flow using the arrow keys and confirming with MENU/ENTER.

Yes, it connects to the testo Smart App via Bluetooth. Ensure Bluetooth is enabled on the anemometer and the app is installed on your compatible smartphone (iOS 13.0 or later/Android 8.0 or later).

Press MODE/END to start. Press MENU/ENTER to record each reading. Press MODE/END again to finish and view the calculated mean.

Press the ◄ key until 'Max' or 'Min' is displayed. Then, hold down the ◄ key for approximately 2 seconds.
Preparing document for printing…
0%