StreamNet™ 930-325-016-D - Video Demo Kit Add On with Digital Encoder TM DEMO KIT CONFIGURATION PROCEDURE To properly configure the StreamNet Demo Kit, complete the following steps: 1. Ensure you have the most recent copy of the Dealer Setup program installed on your PC. This can be downloaded from the ClearOne website (http://www.clearone.com/resources#enterprise_streaming, http://www.clearone.com/ resources#residential_streaming). 2. Ensure that you have downloaded the latest Dealer Setup Manual from the ClearOne website (http://www.clearone. com/resources#enterprise_streaming, http://www.clearone.com/resources#residential_streaming). 3. Connect the Demo Kit as shown in the following figure. 4. Use directions from the Dealer Setup manual to perform the following tasks: Start the Dealer Setup program and use the Dealer Setup Wizard to: •Update device firmware. •Create a project. •Save the project file. •Match devices. •Send the configuration to all devices. > WIRING DIAGRAM > CLEARONE LOCATIONS HEADQUARTERS: Salt Lake City, UT USA 5225 Wiley Post Way Suite 500 Salt Lake City, UT 84116 LATAM Tel: 801-974-3621 e-mail: global@ClearOne.com EMEA Tel: 44 (0) 1189 036 053 e-mail: global@ClearOne.com APAC Tel: 801-303-3388 e-mail: global@ClearOne.com TechSales Tel: 800-705-2103 e-mail: techsales@ClearOne.com Technical Support Tel: 800-283-5936 e-mail: tech.support@ClearOne.com Tel: 801-975-7200 Toll Free: 800-945-7730 Sales: 800-707-6994 Fax: 801-977-0087 e-mail: sales@ClearOne.com © 2012 ClearOne. All rights reserved. Other product names may be trademarks of their respective owners. Specifications subject to change without notice. 800-325-016-D Rev. 1.0 - November 2012.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project