advertisement
DCA 1
Amplifier controlled remotely
DCA 1 is a very versatile amplifier that can operate in many different ways, making it suitable for facilities in restaurants, small shops, etc.
DCA 1 features and amplification system with 120W + 120W and
8 mono input sources, that depending on the configuration, can become in 4 stereo inputs. One of them has MIC input connection in stacking for priority functions and phantom power. Using DMX, you can select the input source and control the volume.
DCA 1 also incorporates RS 232 and RS 485 communication ports for ASCII control commands.
All functions in the menu can be set easily, using the frontal encoder and showing the state in the 2x16 characters backlight
LCD display.
The features that can be set include:
- Output volume
- Inputs assignement (and deleting)
- Priority values
- Control interface selection
- Password fuction
- Phantom enable/disable
Moreover, the input sources can be selected manually thanks to the front push buttons.
Dimensions
* In mm.
Features
● 120W + 120W amplifier.
● 2 independent zones with input source selection.
● 8 mono inputs (4 stereo LINE inputs).
● Input 1 with additional Mic input with priority and
phantom power functions.
● Manual input audio source selection.
● Backlight LCD display.
● Encoder for menu navigation with configuration and
function access.
● Power output through Euroblock
● RS 232 & RS 485 interface for control commands
● Monitor output for external amplification
● 1 HU rack 19”
262 mm
483 mm
Av. del Saler, 14 Pol. Ind. L’Alteró (Silla) 46460 Valencia - España · Tel: +34 96 121 63 01 - FAX: +34 96 120 02 42 · [email protected]/www.equipson.es
DCA 1
Rear View
Specifi cations
Input source: 6 mono inputs (4 LINE stereo)
Outputs: 2 powered outputs + monitor output
Power Output: 120W + 120W
LINE input sensitivity: 775 mV / 0 dBu.
MIC input sensitivity: 7.7 mV / -40 dBu.
Input impedance: 20kΩ
Frequency Response: 20 Hz - 20 kHz
S/N Ratio: > 96 dB
THD+N: < 0.01 %.
Protections: Overheat, Short circuit, DC protection, CLIP.
Phantom power: 24V dc.
Connectivity: RS232/RS485-DMX.
Display: Blue colour backlight 2x16 alphanumeric LCD.
Rear panel connectors:
4 x RCA double (LINE inputs), 1x XLR3 (MIC input)
3x Euroblock_3 pin (connectivity), 2x Euroblock_2 pin (power output)
1x RCA double (monitor output), 1x IEC (mains supply).
Front panel connectors: 1x Encoder (Variation, navegation), 4x push buttons
Indicators:
LCD display, 4x green LED (direct selection) 4x green LED + 2x red
LED ( amplifier state)
Mains supply: AC 120 - 240V, 60/50 Hz
Power consumption: 250 W
Dimensions: 483 x 44 x 262 mm
Weight: 2.5 kg
Block Diagram
PUSH BUTTONS
LCD + ENCODER
LED INDICATORS
RS232 & RS485-DMX interfaces for external control commands.
RS 232
RS 485
M C U
MONITOR
OUTPUT
MIC
LINE
LINE
LINE
LINE
LINE
LINE
INPUT 1
INPUT 2
INPUT 3
INPUT 4
INPUT 5
INPUT 6
PRIORITY
DETECTOR
POWER
AMPLIFIER
POWER
OUTPUT
MAIN
PSU
Rev. 12.06.01
Av. del Saler, 14 Pol. Ind. L’Alteró (Silla) 46460 Valencia - España · Tel: +34 96 121 63 01 - FAX: +34 96 120 02 42 · [email protected]/www.equipson.es
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement