Aegis 7250P Cut Sheet
• 150-250 tenants and 150-250 access codes
• Local programming via keypad with audio prompts
• 1x16 Electronic Liquid Crystal Display (LCD)
• Backlit Keypad Button
• Non-Volatile memory
• Single Relay
• Support pause dialing from the PBX
• Indoor or outdoor, surface and full-flush mount.
• Brushed Stainless Steel Faceplate
Warranty: 24 month
Purchase UPS2L, will include lightning on 24 months warranty
SPECIFICATIONS
POWER INPUT: 12VAC/40VA (supplied) or 12-VDC/40VA with battery
backup charging circuit.
CURRENT CONSUMPTION: 500mA idle, 700mA operating.
OPERATING ENVIRONMENT: 32°F to 140°F. Heater is required if the
temperature is below 32°F.
NIGHT LIGHT: Super Bright Light Emitting Diode (LED).
CONSTRUCTION: 16 Gauge Cold Rolled Steel back box with
enamel finished and Brushed Stainless Steel Faceplate
MOUNTING: Surface and full-flush.
DIMENSIONS:
Surface 10-13/16 “(H) x 8-5/8 “(W) x 3-3/4 “(D).
Full-flush 10-13/16”(H) x 8-3/8”(W) x 2-7/16(D)
MOUNTING RING FULL-FLUSH (FFM7 is included):
Inside 11-1/8” (H) x 8-11/16”(W) x 2-5/8”(D)
Outside 14-5/16” (H) x 12-1/8” (W)
SHIPPING WEIGHT: 10-12 lbs approximate.
ORDERING PART
Surface Mount
7150P
Full-flush Mount
7150P
150 tenants 150 access codes
150 tenants 150 access codes
7250P
7250FFP
250 tenants 250 access codes
250 tenants 250 access codes
ACCESSORIES
Radio Receiver and Transmitter
ARFR Radio Frequency Receiver
ARFT Radio Frequency Transmitter
ARFHT Radio Frequency Handheld
Transmitter
Video Package
UVPC Color Camera Package
UVPB Video Balun for Twisted Pair video
transmission
Pedestal Mounting Post, Adapter Plate and
Mounting Ring
UPM1S Standard Single Arm (42”H, 5”x5” base)
UPM4S Standard Single Arm (47”H, 5”x5” base)
UPM1L Large Single Arm (47”H, 8”x8” base)
UPM6L Large Single Arm (64”H, 8”x8” base)
UPM8L Large Single Arm (84”H, 8”x8” base)
UPM2 Double Vertical Arm (44”/84”H, 8”x8”
Miscellaneous Accessories
USP1 AC and Telephone Surge Protector.
USP2L Surge and Lighning Protection,
include Lightning on 24 months warranty
AHP5 Heater Pad with Thermostat.
UBAT1 12VDC 4.5 Ahr backup battery.
UXIT Multipurpose pust button switch
base)
UPM5 Double Horizontal Arm (47”H, 8”x8”
base)
UPMDB64 Single Arm Direct Buriel (64”H)
UPMDB72 Single Arm Direct Buriel (72”H)
UAP78 Adapter Plate AeGIS 8000P Series
UPM12E 12” Expansion Arm use for all UPM
Specifications subject to change without prior notice
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement