Advertisement
Advertisement
CONNECT YOUR OTA ANTENNA TO YOUR RECEIVER Attach the coax cable from your OTA antenna to the coax port on your OTA adapter. Connect the USB end of your OTA adapter to the USB port on your DISH receiver. Turn your television and receiver on. Then, open the Menu for your receiver. Select “System Setup” on your screen, and then select “Local Channels.” Select “Scan Channels.” When the popup appears, select “OK” and then select “Done.” • This scan could take up to five minutes to complete. When it is complete, you will see a list of the OTA channels that your antenna found. CONNECT YOUR OTA ANTENNA TO YOUR TV Turn your TV on, and take note of the channel or input that it is on. Connect your antenna to your TV’s Antenna In/Air/Cable port. • If your TV requires a conversion box, connect your antenna to the conversion box, and then connect the box to the TV. Using the buttons on your TV, or your TV remote, press the Menu/ Settings,/Home button. Select Channel/Setup/Auto Tuning/ Installation/System. Select Scan Channels/Program Channels/Autoscan/Autoprogram. Select Start/Enter/OK to start scanning and adding channels to your TV’s channel lineup. Select OK/Done to complete your scan. • If you are prompted to select Air or Cable, select Air. Got Questions? Go to mydish.com/ota for details on setting up your OTA antenna OR Give us a call at 1-800-333-DISH (3474) ">

Public link updated
The public link to your chat has been updated.
Advertisement