JENN-AIR DETAILED PLANNING DIMENSIONS 36" PYRAMID-STYLE ISLAND-MOUNT CANOPY HOOD PRODUCT DIMENSIONS

JENN-AIR DETAILED PLANNING DIMENSIONS 36" PYRAMID-STYLE ISLAND-MOUNT CANOPY HOOD PRODUCT DIMENSIONS
JENN-AIR DETAILED PLANNING DIMENSIONS
®
1 of 2
36" PYRAMID-STYLE ISLAND-MOUNT CANOPY HOOD
JXI8536DS – 36" x 321⁄2-529⁄16" x 27
PRODUCT DIMENSIONS
MODEL #
JXI8536DS
in
E
A
A
Width of chimney
B
Width of canopy
36
91.4
Height of trim
23⁄8
6.1
D
Height of canopy
5
12.7
Overall height with vented installation (min.-max.)
1
32 ⁄2461⁄2
82.6118.0
Overall height with non-vented (recirculating)
installation (min.-max.)
321⁄2529⁄16
82.6133.5
F
Depth of chimney
121⁄4
31.0
G
Depth of canopy
27
68.6
H
Width of vent collar
1
6 ⁄4
15.8
I
Depth of vent collar
33⁄4
9.5
J
Width from chimney to edge of canopy
11 ⁄16
29.0
K
Depth from chimney to back edge of canopy
7 ⁄8
18.7
D
C
FRONT VIEW
E
A
33.5
C
E
B
cm
13 ⁄16
3
F
G
7
3
F
K
F
F
I
J
H
B
G
D
C
A
G
G
B
SIDE VIEW
K
I
F
H
J
G
A
B
TOP VIEW
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide
before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8316BAdZw1114
JENN-AIR DETAILED PLANNING DIMENSIONS
®
2 of 2
36" PYRAMID-STYLE ISLAND-MOUNT CANOPY HOOD
JXI8536DS – 36" x 321⁄2-529⁄16" x 27
OPENING/CLEARANCE DIMENSIONS
MODEL #
JXI8536DS
in
A
D
B
Ceiling height
cm
—
—
Suggested distance from hood to electric
cooking surface (min.-max.)
24-36
61.091.4
Suggested distance from hood to gas cooking
surface (min.-max.)
27-36
68.691.4
C
Countertop height
—
—
D
Height from bottom of hood to ceiling (A – B –
C = D)
—
—
ELECTRICAL REQUIREMENTS
B
120 volt, 60 Hz, AC only, 15-amp fused, electrical circuit is required.
A
VENTING REQUIREMENTS
The hood is factory set for venting through the roof. For non-vented (recirculating)
installation, refer to recirculation kit instructions for further information.
LOCATION REQUIREMENTS
Ceiling structure must be able to support 100 lb (45.4 kg).
For vented installation, the chimney can be adjusted for ceilings between 7' 9" (2.36 m)
and 9' 10" (3.00 m).
For non-vented (recirculating) installation, the chimney can be adjusted for ceilings
between 7' 9" (2.36 m) and 10' 4" (3.15 m).
C
FRONT VIEW
IMPORTANT: Dimensional specifications are provided for planning purposes only.
Do not make any cutouts based on this information. Refer to the Installation or Use & Care Guide
before selecting cabinetry, verifying electrical/gas connections, making cutouts or beginning installation.
All Jenn-Air® appliances are appropriately UL, CUL or CSA approved.
8316BAdZw1114
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement